Used in Italy

METTLER TOLEDO - Titrator

• Manufacturer: Mettler - Toledo

Sizes: 1200 × 800 × 600 mm Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. ...

DEMAG - ERGOTECH 1000-310 - Plastic injection molding machine - 1995

• Manufacturer: Demag
• Model: Ergotech

Clamping force: 100 ton Holding force: 100 ton Maximum opening stroke: 500 mm Minimum mould height: 250 mm Distance between plates: 750 mm Plate sizes: 580 × 590 mm Distance between columns: 400 × 400 mm M...

CORDIVARI - Tank

Approximate dimensions: D800 x 1800 mm Maximum storage pressure: 6 bar Maximum storage temperature: 60 °C Minimum storage temperature: -10° C Warning: the information reported has been taken on board the mac...

SOGI - RT-550 - Tangential grinding machine - 2023

Table dimensions: approx. 500 × 250 mm Machine body dimensions: approx. 2000 × 1600 × 1850 mm Power: 4 kW Warning: the information reported has been taken on board the machine and may not correspond to the actua...

BRUDERER - BSTA 25H - Punching press - 1984

• Manufacturer: Bruderer
• Model: BSTA 25
• Stroke length: 20 mm

Press table dimensions: 530 × 530 mm approx.\n Clearance between shelves: approx. 220 mm \n Machine dimensions: 4200 x 2200 x 3500 mm approx.\n Capacity: 25 Ton\n Power: 20 kW\n Strokes per minute: between 875 an...

BRUDERER - BSTA25 - Punching press - 1985

• Manufacturer: Bruderer
• Model: BSTA 25
• Stroke length: 20 mm

Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Quadro dimensions: 1400 x 500 x 2400 mm approx. Capacity: 25 Ton Powe...

DEMAG - ERGOTECH 1000-310 - Plastic Injection Molding Machine - 1998

• Manufacturer: Demag
• Model: Ergotech

Clamping Force: 100 Ton Holding force: 100 Ton Maximum opening stroke: 500 mm Minimum mould height: 250 mm Distance between plates: 750 mm Plate sizes: 580 × 590 mm Distance between columns: 400 × 400 mm M...

DALMEC - PMC - Pneumatic manipulator - 2010

• Manufacturer: Dalmec

With manipulator capacity: 20 kg Dimensions of the base: 800 x 800 mm approx. Column diameter: 250 mm approx. Height: approx. 3000 mm Maximum reach: about 4000 mm Warning: the information reported has been ...

PIOVAN - Q12 - Gravimetric dosing units with vacuum - 2023

• Manufacturer: Piovan

PIOVAN gravimetric dosing units with filter and suction system for vacuum generation. Approximate full body dimensions: 2200 x 800 x 2500 mm Piping not included. Warning: the information reported has been t...

INGERSOLL RAND - R55N-A10 - Screw Compressor - 2015

• Manufacturer: Ingersoll Rand
• Model: R55N

Maximum operating pressure: 10 bar Power: 55 kW Revolutions per minute: 2990 rpm Dimensions: approx. 2400 x 1250 × 2050 mm Warning: the information reported has been taken on board the machine and may not co...

ARBURG - ALLROUNDER ALLDRIVE 520A 1600-400 - Plastic injection molding machine - 2007

• Manufacturer: Arburg
• Model: Allrounder 520

Clamping force: 160 ton Maximum opening stroke: 450 mm Mould height: between 250 and 550 mm Distance between plates: 1000 mm Plate dimensions: 795x795 mm Distance between columns approx.: 520 x 520 mm Maximum ...

BRUDERER - BSTA 25EL - Punching press - 1992

• Manufacturer: Bruderer
• Model: BSTA 25
• Stroke length: 20 mm

Press table dimensions: 530 × 640 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Quadro dimensions: 1400 x 500 x 2400 mm approx. Capacity: 25 Ton Powe...

DEMAG - ERGOTECH 1000-310 - Plastic injection molding machine - 1995

• Manufacturer: Demag
• Model: Ergotech

Clamping Force: 100 Ton Holding force: 100 Ton Maximum opening stroke: 500 mm Minimum mould height: 250 mm Distance between plates: 750 mm Plate sizes: 580 × 590 mm Distance between columns: 400 × 400 mm M...

DEMAG - Jib Crane 1 Ton

• Manufacturer: Demag

Outreach: about 4500 m Height: approx. 4000 mm Capacity: 1 ton Warning: the information reported has been taken on board the machine using measuring instruments and may not correspond to the actual perfor...

DEMAG - Gantry crane 1 ton

• Manufacturer: Demag

Frame dimensions: approx. 10000 x 4500 mm Hoist stroke: approx. 9000x5000 mm Height: approx. 3500 mm Capacity: 1 Ton Warning: the information reported has been taken on board the machine and may not corres...