Used in Italy

DEMAG - D-AW 180 - Jib cranes

• Manufacturer: Demag

Outreach: about 5 m Hoist capacity: 1 ton Warning: the information reported has been taken on board the machine using measuring instruments and may not correspond to the actual performance. For further info...

PNEUMOFORE - DS 0550 - Dryer

Refrigerant: R134A - Load: 1.25 kg Maximum operating pressure: 16 bar Power: 1.2 kW Approximate dimensions: 1800 x 900 x 1600 mm - both bodies The values shown refer to a single dryer that is part of two conn...

ATIS - Pneumatic manipulator - 2014

With manipulator with a capacity of 25 Kg. Base size: approx. 1000 × 1000 mm Column diameter: about 250 mm Height: approx. 2600 mm Maximum reach: about 4000 mm Warning: the information reported has been t...

LAINOX - SAPIENS - Foodservice steam oven

Furnace internal dimensions: approx. 650 × 400 mm External dimensions of the oven: approx. 850 × 820 × 1100 mm Dimensions of the base on which the oven rests: 1270 × 920 × 700 mm

ARBURG - ALLROUNDER ALLDRIVE 320A 500-170 - Plastic injection molding machine - 2008

• Manufacturer: Arburg
• Model: Allrounder 320

Clamping force: 50 ton Holding force: 50 ton Maximum opening stroke not detected Minimum mold height not detected Plate spacing Not detected Plate size: 450× 450 mm Distance between columns: approx. 370× 370...

SESOTEC - Metal Detector

• Manufacturer: Sesotec

Composed of 6 packages with dimensions: 1200 x 800 x 900 mm approx. Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information,...

BRUDERER - BSTA 25 - Punching press - 1985

• Manufacturer: Bruderer
• Model: BSTA 25
• Stroke length: 20 mm

Press table dimensions: 530 × 540 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 150...

ATIS - Pneumatic manipulator - 2014

With manipulator with a capacity of 25 Kg. Base size: approx. 1000 × 1000 mm Column diameter: about 250 mm Height: approx. 2600 mm Maximum reach: about 4000 mm Warning: the information reported has been t...

HB-THERM - THERMO 5 - Temperature controllers (5x)

Composed of: N°5 temperature controllers. The first photo is for representative use only. The products that will be delivered are those photographed on the platform still packed. Including operation guide. ...

ISVE - MR2260 - Grinder - 2018

• Manufacturer: Isve
• Model: MR

Machine dimensions including external protection: 2300 x 1400 x 3200 mm approx. Conveyor belt dimensions: 800 x 2500 x 1500 mm approximately. Belt width: about 500 mm Electrical panel dimensions: 1200 x 650 x...

Shelving with idle rollers

First shelving: Shoulder dimensions: 700 x 80 x 3000 mm approx. - quantity: 4 pieces Crossbar dimensions: approx. 2200 x 700 x 120 mm, with idle rollers - quantity: 12 pieces Approx. 6.5 metres of shelving ...

TMC - Dry-type transformer - 2022

Three-phase. Apparent power: 1000 kVA Sizes 1200 × 1600 × 2200 mm Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further informa...

DEMAG - INTELECT 50-330-100 - Plastic injection molding machine - 2007

• Manufacturer: Demag
• Model: Intelect 50/330-100

Clamping Force: 50 Ton Holding force: 55 Ton Maximum opening stroke: 260 mm Minimum mould height: 150 mm Approx. Maximum: 350mm Distance between plates: 610 mm Plate size: 490× 500 mm Distance between colu...

CSC - 3000 l tank - 2019

Approximate dimensions: D1200 x 2500 mm Consider at least 1400 mm of lateral clearance due to flanges and valves. Capacity: 3000 l Pressure: 12 bar Warning: the information reported has been taken on boar...

DEMAG - D-AW 180 - Jib cranes

• Manufacturer: Demag

Outreach: about 5 m Hoist capacity: 1 ton Warning: the information reported has been taken on board the machine using measuring instruments and may not correspond to the actual performance. For further info...