Used in Italy

DEMAG - Jib Crane 1 Ton - 2015

• Manufacturer: Demag

Outreach: approx. 3 m Height: approx. 3300mm Capacity: 1 ton Warning: the information reported has been taken on board the machine using measuring instruments and may not correspond to the actual performance. For...

DEMAG - ERGOTECH 1000-310 - Plastic injection molding machine - 1995

• Manufacturer: Demag
• Model: Ergotech

Clamping Force: 100 Ton Holding force: 100 Ton Maximum opening stroke: 500 mm Minimum mold height: 250 mm Distance between plates: 750 mm Plate sizes: 580 × 590 mm Distance between columns: 400 × 400 mm Maximum w...

FULLSTRAP - FULLSTRETCH - Parcel packer

Machine dimensions: approx. 2700x1800x2100mm Maximum packing height: approx. 1800mm Base diameter: approx. 1650mm Warning: the information reported has been taken on board the machine using measuring instruments ...

BRUDERER - BSTA 25EL - Punching press - 1992

• Manufacturer: Bruderer
• Model: BSTA 25
• Stroke length: 20 mm

Press table dimensions: 530 × 640 mm approx. Clearance between shelves: approx. 220mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Panel dimensions: approx. 1400 × 500 × 2400mm Capacity: 25 Ton Power: 40 kW ...

BRUDERER - BSTA 25 - Punching press - 1980

• Manufacturer: Bruderer
• Model: BSTA 25
• Stroke length: 20 mm

Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Strokes per minute: between 875 and 1500 Warning: the information reported h...

INGERSOLL RAND - R55N-A10 - Screw Compressor with Chiller - 2015

• Manufacturer: Ingersoll Rand
• Model: R55N

Maximum operating pressure: 10 bar Power: 55 kW Revolutions per minute: 2990 rpm Dimensions: approx. 2400x1250x2050mm Including chiller, dimensions: approx. 900 × 720 × 1400mm Warning: the information reported ha...

BRUDERER - BSTA25H - Punching press - 1985

• Manufacturer: Bruderer
• Model: BSTA 25
• Stroke length: 20 mm

Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Capacity: 25 Ton Power: 20kW Strokes per minute: between 875 and 1500 Warnin...

DEMAG - ERGOTECH 1000-310 - Plastic injection molding machine - 1995

• Manufacturer: Demag
• Model: Ergotech

Clamping Force: 100 Ton Holding force: 100 Ton Maximum opening stroke: 500 mm Minimum mold height: 250 mm Distance between plates: 750 mm Plate sizes: 580 × 590 mm Distance between columns: 400 × 400 mm Maximum w...

DEMAG - ERGOTECH 1000-310 - Plastic injection molding machine - 1995

• Manufacturer: Demag
• Model: Ergotech

Clamping Force: 100 Ton Holding force: 100 Ton Maximum opening stroke: 500 mm Minimum mold height: 250 mm Distance between plates: 750 mm Plate sizes: 580 × 590 mm Distance between columns: 400 × 400 mm Maximum w...

DEMAG - D-AW 180 - Jib cranes

• Manufacturer: Demag

Outreach: about 5 m Hoist capacity: 1 ton Warning: the information reported has been taken on board the machine using measuring instruments and may not correspond to the actual performance. For further informatio...

PNEUMOFORE - DS 0550 - Dryer

Refrigerant: R134A - Load: 1.25 kg Maximum operating pressure: 16 bar Power: 1.2 kW Approximate dimensions: 1800 x 900 x 1600 mm - both bodies The values shown refer to a single dryer that is part of two connecte...

ATIS - Pneumatic manipulator - 2014

With manipulator with a capacity of 25 Kg. Base size: approx. 1000×1000mm Column diameter: about 250mm Height: approx. 2600mm Maximum reach: about 4000 mm Warning: the information reported has been taken on board...

LAINOX - SAPIENS - Foodservice steam oven

Furnace internal dimensions: approx. 650×400mm External dimensions of the oven: approx. 850 × 820 × 1100mm Dimensions of the base on which the oven rests: 1270 × 920 × 700 mm

ARBURG - ALLROUNDER ALLDRIVE 320A 500-170 - Plastic injection molding machine - 2008

• Manufacturer: Arburg
• Model: Allrounder 320

Clamping Force: 50 Ton Holding force: 50 Ton Maximum opening stroke not detected Minimum mold height not detected Plate spacing Not detected plate size: 450 × 450 mm Distance between columns: approx. 370×370mm Ma...

SESOTEC - Metal Detector

• Manufacturer: Sesotec

Composed of 6 packages with dimensions: 1200 x 800 x 900 mm approx. Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information,...