Used Processing in Flanders, Belgium

1978 Arvor 872 BB
- Manufacturer: Arvor
Bottom seal machine with flying knife Unwind stand with mechanical shaft + cones + mechanical brake system Adjustable roller system to position the print (offset system) Photocell for printed film Clutch and brak...
Aalst, Belgium
1987 Kiefel Rotex 30 S
- Manufacturer: Kiefel
Blown film extruder For the production of LDPE – MDPE & LLDPE film The extruder and rotating film blowing head are mounted in the top of the tower The film is blown from the top of the tower to the winder on the ...
Aalst, Belgium
1994 Stiegler US-S 800
- Manufacturer: Stiegler
Side sealing machine 380 V, 50 Hz Servo motor for bag feeding (original servo system made by Stiegler) Sealing bar for PP and thin LDPE equiped with thermocouple Sick photocell for printed film 2 x Stiegler perfo...
Aalst, Belgium
1974 Arvor 872 GL
- Manufacturer: Arvor
Bottom seal machine with flying knife Unwind stand with 2 positions and 2 shaft of 25mm + 4 cones Sealing bar and flying knife in good condition Clutch and brake in good condition All rubber rollers in good condi...
Aalst, Belgium
1982 Hudson Sharp MS 750
- Manufacturer: Hudson-Sharp
- Model: MS 750
Side seal machine renewed in 2015 Completely mechanical and electrically overhauled & renewed in 2015 3x400V, 50Hz Scae unwind shaft driven, 140cm wide Air shaft 76mm with 2 safety Boschert chucks 4 roll dancer t...
Aalst, Belgium
2013 Clint CWW/K/WP 453-P water cooled liquid chiller
- Manufacturer: Clint
- Model: CWW
NEW !! Never been used. Clint CWW/K/WP 453-P Cold carrier: Water | Cooling agent: R410A | Cooling power: 149,5 KW | Temperature of condensation: 30/35 degrees C | Temperature of the cold carrier: 7/12 degrees C |...
Aalst, Belgium
Plast-Control Magicflow K400
- Manufacturer: Plast-Control
- Model: Magicflow
Aalst, Belgium
1998 Macchi ES 65 / 30 Plastex 5 layer extruder
- Manufacturer: Macchi
Only hot section available 5 extruders with Plast control dosing equipment Extrusion head No control, no electrical cabinet.
Aalst, Belgium
1970 Stiegler T800
- Manufacturer: Stiegler
- Model: T800
Side sealing machine Clutch and brake machine Sealing bar for LDPE & PP Stacking table unwind
Aalst, Belgium
1967 Stiegler TS800
- Manufacturer: Stiegler
- Model: TS800
Side sealing machine 380 V 50 Hz 2,5 kW Unwind stand in line with 2 positions + 2 mechanical shafts Clutch and brake 1 side seal bar for LDPE 1 side seal bar for PP (polypropylene) Pick off section Stacking table
Aalst, Belgium
Trusted Seller
Prominox nv. Roller conveyor
- Manufacturer: Prominox
Prominox nv. s/s roller conveyor, year of construction: 04/2004, plastic rollers, roller width: 335 mm, total dimensions: 5050 mm x 430 mm x 1170 mm. Missing rollers.
Anzegem, Belgium
Trusted Seller
Dumon Roller conveyor
Dumon 45° roller conveyor, fabric number: 1910052, s/s frame, plastic rollers, roll width: 160 mm, total dimensions: 2200 mm x 920 mm x 940 mm.
Anzegem, Belgium
Trusted Seller
Ott freezer Ice machines
- Manufacturer: OTT
Ott freezer mobile ice machine, type: F3, number: 5249, 220 V, 4/6.4 A, 0.35/0.9 kW, dimensions: 700 mm x 420 mm x 1100 mm.
Anzegem, Belgium
Trusted Seller
NN ice machine Ice machines
Ice machine, model: IMS-100, serial number: SHS100 1018028, 230 V, 50 Hz, 12.4 A, 520 W, netto weight: 58 kg, refrigerant: R134A, 130 g, capacity: 100 kg per hour, dimensions: 500 mm x 610 mm x 930 mm.
Anzegem, Belgium
Trusted Seller
Prominox nv. Roller conveyor
- Manufacturer: Prominox
Prominox nv. s/s roller conveyor, plastic rollers, roller width: 335 mm, total dimensions: 3750 mm x 450 mm x 1200 mm.
Anzegem, Belgium