Used Processing in Flanders, Belgium

GN 46P

• Manufacturer: GN

3 side seal pouch sealing machine 3 x220 V 50/60 Hz 2 position unwind with Boschert safety chucks 2 Tidland air shafts 76mm with powder brake on each shaft Edge guide with air sensor on each unwinding unit Ultras...

1987 De Bernardi PlastiMac 402A

• Manufacturer: De Bernardi

T-shirt bag making machine Completely overhauled in 2018 Max sealing width 320 mm, Blocking with hot needles Punching must be done separately Speed 70 – 130 cycles / Min. For LDPE, HDPE, LLDPE

1967 Printex 380 AN

• Manufacturer: Printex

Bottom seal machine to make loose bags and bags on the roll with core Machine can run loose bottom seal bags Machine can run bottom seal with tear-off perforation and rewinded on a carton core Photocell for print...

Volumetric mixer

Volumetric mixer for 3 components

1967 Stiegler TS800

• Manufacturer: Stiegler
• Model: TS800

Servo driven side seal machine Refurbished with touchscreen 220 – 380 Volt – 50Hz Unwind in line with 2 positions Servo driven film feeding rolls Photocell for printed film Pick off section Stacking table Machine...

FMC 75W

• Manufacturer: FMC

Wicket machine with medium long arms Servo driven machine (overhauled) Wicket arms 500mm, good for bread bags and also for bigger wicket bags 3 sets of 6 wicket arms Rubber draw rolls with blowing fingers Driven ...

Stiegler U900 W-TSL

• Manufacturer: Stiegler
• Model: U900

Carrier bag making machine Machine with clutch & brake Wicket machine with 6 pair of arms to stack the carrier bags on the conveyor belt Long conveyor belt Electrical operator panel for all machine settings, incl...

Industrial vacuum cleaner 80L Electric 3000W

Options: Manual New, unused machine.

2005 Fuel tank Western Trans Cube 959lts

• Manufacturer: Western
• Model: Transcube

Machine is working. This auction concerns a stock liquidation. Since it is very specific material, the description may not be completely accurate. The photos take precedence over the description.

2005 Fuel tank Western Trans Cube 959lts

• Manufacturer: Western
• Model: Transcube

Machine is working. This auction concerns a stock liquidation. Since it is very specific material, the description may not be completely accurate. The photos take precedence over the description.

Stone cutter

Machine is working. Lot_number: 448

Stone cutter ALMI

• Manufacturer: Almi

Used machine. Lot_number: 453

2020 Stone saw Norton CM 42

• Manufacturer: Norton

Machine is working. Lot_number: 443 | Machine weight: 90 kg

2022 Stone saw Norton CM450 Junior

• Manufacturer: Norton

Machine is working. Lot_number: 440

Industrial vacuum cleaner 80L Electric 2000W

Options: Manual Bagless Wet/dry vacuum cleaner In box 2 castor wheels Drain hose Various accessories Stainless steel reservoir with a capacity of 80 liters New, unused machine.