Used Processing in Wallonia, Belgium

Ladle suspension system FOUNDRY SERVICE

• Manufacturer: FOUNDRY SERVICE

External dimensions: Length: 2100 mm; Height: 2200 mm

Pouring Furnace PROGELTA GH3, 200 kW

• Manufacturer: PROGELTA

Hydraulically tiltable With channel inducteur, 200 KW, 400 V, 50 Hz With spare furnace body With spare inductor With emergency power generator New electric control in 2022 with PLC SIEMENS TIA Portal

Core sand mixing installation STEFFENS ±2t/h

• Manufacturer: STEFFENS

System consisting of mixer, hopper, transfer trolley and dosing station for resin and hardener Mixer: External dimensions: Length: 700 mm; Width: 900 mm; Height: 1500 mm Usable dimensions: Ø600 mm; Depth: 460 mm ...

Gasing unit LÜBER LW-FDA-825; 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With 8 kW heating With contactor control and stainless steel storage tank 30 l Compressed air control via proportional valve With micro pump, gas dosing via rotameter

Gasing unit LÜBER LW-FDA-825; 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With 8 kW heating With contactor control and stainless steel storage tank 30 l Compressed air control via proportional valve With micro pump, gas dosing via rotameter

Compressor ATLAS COPCO GA75FF 763m³/h

• Manufacturer: Atlas-Copco
• Model: GA 75

External dimensions: Length: 2000 mm; Width: 1000 mm; Height: 1950 mm

Induction furnace JUNKER 2x 4t

• Manufacturer: Junker

Crucible dimensions: Ø780mm; height: 1475mm Melting and holding warm possible at the same time With 2 loading conveyors With 2 water pump stations With hydraulic unit With control cabinet SIEMENS S5 control With ...

1980 Dry Discgrinder HERZOG HT 350-2

• Manufacturer: Herzog

Type: HT350-2, Year: 1980, in very good conditions With installed dust filter

1989 Vibrating dryer TECHNOFINISH

• Manufacturer: TECHNOFINISH

Make: TECHNOFINISH | Weight: ± 1000 kg | Dimensions: Ø 1560mm, height 1300mm | Motor: 380 V, 50 Hz | Useful width: max. 450mm

8 Ingots moulds 2 x ±4l

Dimensions: Length: 1100 mm, width: 300 mm; height: 230 mm Internal dimensions bottom: 150 x 110 mm; top: 220 x 370 mm with round trunions, 1 side with square pin in suplement for tilting Without support construc...

Manual sandblasting unit LABOREX

• Manufacturer: Laborex

Dimensions: Length: 1270 mm; width: 1500 mm; height: 2400 mm With exhaust fan and pressure vessel 8 bar max Includes extension rail and collection funnel (for extending the table and collecting the sand)

Ingot 10 steel trestles for residual liquid max +- 400 C°

• Manufacturer: Stahl

10 moulds with a volume of ±3l External dimensions: Length: 1500mm; Width: 750mm; Height: 800mm Mould dimensions: Length: bottom: 550mm; Length: top: 640mm; width at top: 110 mm; width at bottom: 30 mm Fold back ...

Manual sandblasting unit PHIBO INDUSTRIES

• Manufacturer: PHIBO INDUSTRIES

Dimensions: Length: 1300 mm; Width: 1830 mm; Height: 2100 mm Internal dimensions: Ø turntable: 760 mm Cabinet depth: 1250 mm; Door: 940 x 940 mm Max pressure 7 kg/cm² = ±6.8 bar With exhaust fan Includes extensio...

2022 Cupola filter with cooler GARANT 40.000m³/h

• Manufacturer: Garant

Filter system With discharge screw and motorised double flap With fan With GARANT gas cooler With cooler cleaning, 200Pa, 0.7kW With fresh air flap 1500mm x 350mm With hopper and motorised double flap and big bag...

2018 Mixing plant for core sand LORAMENDI 6t/h

• Manufacturer: Loramendi

Consisting of: -1 Sand bunker -1 Temperature control system 4.8t/h -1 Weighing hopper -1 Core sand mixer LORAMENDI; MDR1,5 150kg / filling; 90s mixing time / filling -2 Dosing tanks for resin and hardener -2 Tank...