Used Machine Tools in Saxony, Germany

HOFFMANN cooling unit

• Manufacturer: Hoffmann

Cooling unit for coolant HOFFMANN ERK 210-V Connected load 11 kW 380 V used, tested !

FILTER TECHNOLOGY GERA Coolant system

• Manufacturer: FILTER TECHNOLOGY GERA

Coolant system FILTER TECHNOLOGY GERA Coolant system incomplete ( drive for the belts is missing (picture 2) ) with 4 Brinkmann pumps TBR63/270 (2 times) TB303/370-T TB250/350 New !

AMK chip conveyor

Chip conveyors, hinged plate belt chip conveyors AMK AUTOMATION Type 1100 x 430 Drive motor: 0.25 kW 230 / 400 V 3AC Coolant pump: SCHMALENBERGER SM 32-13/2 Pump motor: ATB AF 90L/2M-12L+E2 2,2 kW 2840 rpm 230 / ...

OVERBECK shaft clamping cylinder

• Manufacturer: Overbeck

Shaft clamping cylinder OVERBECK MM0WL000028 New! Diameter: Ø 24 / 30 / 85 / 63 / 25 mm | Length: 73.5 / 65 / 14 / 26.5 / 82 mm | Total length: 261 mm | Dimensions: 261 x 85 x 85 mm

MMZ1335

Rotary feedthrough, inlet DEUBLIN DD RTR FLG 2620-500-252 Like new!

Ku294

Metal bellows coupling, bellows coupling PAGUS Ø 40 / 42 mm 6-corrugated bellows New !

ORTLINGHAUS mechanical clutch

• Manufacturer: ORTLINGHAUS

mechanical clutch ORTLINGHAUS CLUTCHES serial no. 89-15483 with thrust bearing and additional shift ring New !

ORTLINGHAUS mechanical clutch

• Manufacturer: ORTLINGHAUS

mechanical clutch, multi-plate clutch ORTLINGHAUS COUPLINGS Factory no. 39 used, tested! Â

WMW mechanical clutch

• Manufacturer: WMW

mechanical clutch, multi-plate clutch WMW, DRESDEN CLUTCH FACTORY 4 - TGL 42398 used, tested!

POLO filter technology Coolant treatment

• Manufacturer: POLO

Coolant processing, inclined bed filter with magnetic filter POLO filter technology Inclined bed filter: SB-A0.4 Magnetic filters: MAF-0150 50Hz used, tested!

PAGUS V-belt pulley

• Manufacturer: Pagus

V-belt pulley, stepped pulley PAGUS Ã 299 - 351 mm Shaft length: 75 mm, groove width: 10 mm Material: Aluminum (pulley), steel (hub) used, tested !

WMW bearing block

• Manufacturer: WMW

Bearing block, counter bearing for milling spindle WMW Ø 70mm x 150mm Distance between the center of the spindle and the upper edge of the dovetail: 150 mm Dovetail guide: 200 /155 mm, height: 30 mm, width: 135 m...

FLEXTORY torque limiter

• Manufacturer: FLEXTORY

Torque limiter, slip hub, slip clutch, safety clutch FLEXTORY GERMANY FT700 TORQUE LIMITER New !

SKF hydraulic nut

Hydraulic nut SKF HMV 12 New, preserved! Thread: M60 x 2.0 | Stroke: Max. 5 mm | P: max. 80 MPa (800 bar) | Outer diameter: 125 mm | Width: 43 mm | Dimensions: 165 x 125 x 43 mm

PAGUS top slide

• Manufacturer: Pagus

Upper slide PAGUS Normal 0 21 false false false EN X-NONE X-NONE Holder for steel holder system MULTIFIX Size: B used, checked!