Used Machine Tools in Saxony, Germany

1985 WMW 3880x1390

• Manufacturer: WMW

distance of t-slots=250mm T-slot size: a=28mm b=50mm c=24mm h=52mm

PAGUS universal worktable

• Manufacturer: Pagus

Universal clamping table, swivel, tilt and turntable PAGUS 5 grooves Can be rotated horizontally to the right and left 40 degrees each Can be tilted from/to the machine 30 degrees to the right and left 40 degrees

WMW SP 4750x1850x200

• Manufacturer: WMW

steel plate are available for sale. T-slots according to DIN 650 a=42mm; b=74mm; h=65mm distance edge to 1st T-slot = 150mm distance T-slot to T-slot=310mm

1988 Krups AP 4000x2000x460

• Manufacturer: Krups

2 pieces cast steel plates for sale free. T-slots according to DIN 650 a=40; h=56; b=74; c=28mm; center distance of T-slots = 250 mm The plates are equipped for lateral fixing.

WMW AP 510x270x65

• Manufacturer: WMW

very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 10...

WMW ALU 4200x2000

• Manufacturer: WMW

Aluminum plate with 800 clamping holes, M8; countersunk Ø 11,5 x 15mm with 4 clamping holes, M24 The plate is placed on a wooden support frame.

WMW ALU 4000x1700

• Manufacturer: WMW

Cast aluminum plate, finished This plate can be used for assembly work on both sides. Numerous clamping holes (M8) evenly arranged on the plate. By means of lift/chassis (welded/screwed) the aluminum plate stands...

STOLLE AP 5500x2150x340

• Manufacturer: STOLLE

Material cast steel Milled, finished surface T-slots according to DIN 650: a=28; h=46; b=48; c=21mm Center distance 150 / 230 mm

bolster plate AP 5500x1890x380

3 clamping plates (price per plate) Weights: No. 1 = 8000kg; No. 2 = 9000kg; No.3 = 8500kg Material: Cast iron T-slots according to DIN 650 Slots lengthwise Number 6 Size a=36mm,h=64mm,b=60mm,c=25mm Center distan...

bolster plate AP 2000 x 1500 (Nr.1 - Nr.6)

There are 6 of these clamping plates for sale. (price per piece) Material cast steel/profile casting T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x f...

GEORG clamping table

Work table, clamping table, welding table, machine table GEORG 5400 x 1000 mm Center groove via 8 profiles 40 x 25 mm Weight approx. 4 tons

RÖHM compact clamp

• Manufacturer: Röhm

Compact vice, machine vice RÖHM NC - Compact vice Back wide: 100 mm | Back height: 40 mm | Span: 70 - 115 mm adjustable | Dimensions: 420 x 195 x 195 mm

CSEPEL clamping cube

• Manufacturer: Csepel

Clamping cube, angled table CSEPEL Slot width: 28 / 48 mm, slot depth: 50 mm Slot width: 28 / 48 mm, slot depth: 50 mm Accessories e.g. for radial drilling machine CSEPEL RFH75 ! used, tested !

MMZ1275

Machine vice with table WMW SX125 on table with graduation 360° rotatable used, tested !

KENNAMETAL shrink chucks

• Manufacturer: Kennametal

Shrink chucks, shrink chucks KENNAMETAL HSK A100x25x115 HSK100ATT25115M New!