Used Machine Tools in Saxony, Germany

WMW AP255x140x65

• Manufacturer: WMW

very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 10...

WMW AP205x195x65

• Manufacturer: WMW

14 plates available T-slots according to DIN 650 for T-slot nuts according to DIN 508 a=13.9; b= 24.2; c= 9.8; h=19.9 mm

Clamping Units Rottler

• Manufacturer: Rottler

4 pieces clamping claws Dimension per clamping claw: L: 420 x W:400 x H: 400mm Clamping surface 80 x 80mm, clamping on both sides Clamping travel approx. 120mm Clamping width flexible Mounting: -Base area LxW: 42...

Clamping Units SEDIN STANKO

• Manufacturer: Sedin

These 4x clamping claws are for sale. Used as workpiece clamps for turning and drilling work Cast steel construction Workpiece holder: Clamping surface WxH: 70 x 65mm, internal and external clamping, clamping str...

WMW 800x455x250

• Manufacturer: WMW

ram plate of a PYE 160S press Use: e.g. for reducing the installation height of the press or shortening the working distance (forward run) - with centre bore Ø 40mm continuous - with 6x part circular drilling Ø 1...

WMW 810 x 690 x 190

• Manufacturer: WMW

T-slots centric Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 3 | Floor-plate length: 810 mm | Plate width: 690 mm | Plate height: 190 mm | Hole diameter: ca. 119...

bolster plate AP 3500x2000x360 (5768)

There are 2 plates for sale. (price per plate) Surface milled Longitudinal groove Quantity 8 Size a=35mm,h=62mm,b=60mm,c=25mm Center distance 250mm Side fastening D=27x58mm Quantity long side 3 short side 2

bolster plate AP 2000 x1000 x180 (Nr.1-3)

3 pcs availabe (price per piece) Cast steel Table surface 2020mm x 995 mm Longitudinal groove: Number 4 Size: a=38, h=60, b=59, c=24 mm Center-to-center distance 250 mm Fixing hole: Number 4 Size D=30mm

1986 NARADI PRAHA JU 30

• Manufacturer: NARADI PRAHA

air pressure clamping unit application area operation of vise clamping consists: air pressure motor, impuls mechanism and a control mechanism air pressure supply necessary averaged operation pressure 0,4- 0,6 MPa...

WMW AW 300x340x150

• Manufacturer: WMW

Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Table length: mm | Table width: mm | Table load: t | Width: 300 mm | Depth: 150 mm | Height: 340 mm | Weight of...

WMW AW 400x335x500 (Nr.15)

• Manufacturer: WMW

T-slot to DIN 650: T-slot width a= 22; h= 39.5; b= 40; c= 17.5 mm, T-slot spacing 125 mm

nicht bekannt MP 200

• Manufacturer: nicht bekannt

PERMANENT MAGNETIC ROUND PLATES distance between 5x magnetic cores 36mm, width 20mm force operation 8mm square key (not included)

Angular Clamping Device WMW

• Manufacturer: WMW

Execution of the clamping surface vertical: H: 1150mm; W: 1005mm; surface finished, 49 pcs. threaded holes M24; sideways 7 pcs. semicircular recessesØ 100 x 82 mm (each side) Execution clamping surface foot: L: 5...

WMW AW 200x500x300

• Manufacturer: WMW

2 pieces available ( price per piece) Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Table length: mm | Table width: mm | Table load: t | Width: 200 mm | Depth...

WMW AW 1270x1000x1600

• Manufacturer: WMW

2 pieces clamping angle available ( Priece per piece) T-slot according to DIN 650 a=35mm; b=60mm; c=27mm; h=65mm