• HOBART 4046

    No price - Ball Ground, GA, USA
    • Manufacturer: Hobart

    hobart grinder with 5 hp, 1725 rpm motor. feed pan is approximately 48"l x 27"w x 4"h. infeed: 8". discharge: 4". capable of grinding the beef from 25 to 60 pounds per minute. electrical: 208v/60hz...

  • HOBART 4046

    No price - Ball Ground, GA, USA
    • Manufacturer: Hobart

    driven by a 6hp, 1725rpm single speed motor. the overall dimensions of the unit are as follows: 44"w x 36"l x 48"h. this machine is designed as a meat chopper

  • AGRIMETAL GA180S

    $4,000 - Thomson, GA, USA
    • Manufacturer: AGRIMETAL

    18hp briggs & stratton engine, mounted on trailer. ga1805s

  • 2016 O thers RM27

    $15,000 - Valdosta, GA, USA Recently Added
    • Manufacturer: O

    - a variety or attachments are available for this model - 7 inch rubber tracks - 26.5hp kohler motor - 9 gal fuel tank - 2 speed travel

  • 2013 SamSong Design Tek 40t x 6200L 10266

    No price - Marietta, GA, USA
    • Manufacturer: Tek
    • Capacity: Max 1,000 ton
    • Weight: 23.5 Ton

    oil tank: 3,000 liter | main motor: 200 hp 4p 60 hz | bending max: 210 kg/cm² | driving max: 250 kg/cm² | total weight: 23.5 ton | bending speed: 3 mm/sec | stroke - main: 850 mm | working press: ...

  • 2013 CIM TEK CIMBR3 110T x 420L 10247

    No price - Marietta, GA, USA
    • Manufacturer: Tek
    • Capacity: 25 ton - 110 ton x 4,200 mm

    main control panel x 1 remote control panel x 1 accessory tool for resolution & assembly x 1 set

  • 1967 Boldrini TIPO PSI 12' x 6" 10082

    No price - Marietta, GA, USA
    • Manufacturer: Boldrini
    • Capacity: 152 x 3,658 mm

    remove both bottom rolls from build up couplings journals and re-machine surfaces. replace both drive couplings with new forgings. remove main gear box and replace anchor repair or replace bolts. p...

  • Boldrini RIBO 24 10321

    No price - Marietta, GA, USA
    • Manufacturer: Boldrini
    • Capacity: 4,000 mm

    diameter capacity: 4,000 mm | thickness capacity: 24 mm

  • H280/V180 10425

    No price - Marietta, GA, USA
    • Manufacturer: SEC
    • Weight: 8,000 kg

    rolling force: 180 ton | ring weight, max: 8,000 kg | taper cone angle: 32 degree | main roll diameter: 1,000 mm | rolling force, max: 280 ton | rolling speed, max: 1.5 / sec | horizontal stroke o...

  • 2009 Inteco 150ton/CH 10405

    No price - Marietta, GA, USA
    • Manufacturer: JET Tools
    • Capacity: 2000 Am 3/min at 160 DegC
    • Weight: 1.5 m 3 x 4 each

    ladle furnace moving rail car for ladle dust collection for lf and acs automatic subsidiary material input system for lf 12 mva transformer for lf