Building Filters
2015 JOHNFORD ST40HX
- Manufacturer: Johnford
- Model: ST40
2- 32" SMW Big Bore chucks Rapid Traverse: X: 12; Z: 16 m/min Fanuc Series Oi-D Chip Conveyor Rear Chuck
2016 OKUMA GENOS L400
- Manufacturer: Okuma
- Model: GENOS L400
- Spindle bore: 52 mm
OSP Chip Conveyor Tool Presetter Bar capacity: 2.625" | Chuck size: 8" | Spindle speed: 3,000 RPM | Spindle motor: 20 HP | X axis travel: 8.66" | Z axis travel: 20.47" | Rapid rate z axis: 984 IPM | Turret tools:...
- Trusted Seller
2014 OKUMA V100R
- Manufacturer: Okuma
- Model: V100R
Imperial Metric FANUC 31I-TB CNC COLOR CONTROL HAND HELD MPG CHIP CONVEYOR & CHIP 39.6 COMBINATION CHUCK SYSTEM HIGH PRESSURE COOLANT SYSTEM 1000 PSI THROUGH TOOL TOOL SETTER MIST COLLECT SYSTEM
Huntley, IL 
2018 JOHNFORD SL500A2S
- Manufacturer: Johnford
- Model: SL500A
- Spindle bore: 52 mm
Cross Travel (Y-Axis) +/-50mm (Turret) Cross Travel (X-Axis) +/-225mm (Turret) Longitudinal Travel (Z-Axis) 470 mm (Turret) Rapid Transverse X: 15m/min, Y:10m/min, Z: 18m/min (Turret) Fagor Chip Conveyor Tool P...
- Trusted Seller
2019 HWACHEON VT 950
- Manufacturer: Hwacheon
- Model: VT950
Imperial Metric FANUC SERIES 0I-TF CNC COLOR CONTROL MANUAL GUIDE I CONVERSATIONAL PROGRAMMING LINEAR SCALE X / Z AXIS 10 POSITION TURET + 16 POSITION ATC 32" 4 JAW CHUCK HWACHEON LATH VIBRATION CONTROL HLVC HWAC...
Huntley, IL 
2016 HARDINGE CONQUEST V1000
- Manufacturer: Hardinge
- Model: CONQUEST V1000
Mitsubishi Chip Conveyor 4th Axis Rotary Table X axis travel: 40" | Y axis travel: 20" | Z axis travel: 20" | Spindle motor: 20 HP | Spindle speed: 10,000 RPM | Spindle taper: CT-40 | Tool changer: 30 ATC | Table...
2001 MORI SEIKI ZT2500Y
- Manufacturer: Mori Seiki
- Model: ZT-2500
- Spindle bore: 65 mm
MSX-501III Chip Conveyor Tool Presetter Live Tooling Sub Spindle Y Axis 5 Axis
- Trusted Seller
1980 Bridgeport Series I with a Proto Trak SMX Control
- Manufacturer: Bridgeport
- Model: Series I
One-Shot Lubrication System Installed Proto Trak CNC control in 2022
- Trusted Seller
Mikron 2004 Mikron Hsm 400 U CNC VMC - Hsm 400 U
- Manufacturer: Mikron
- Model: HSM 400 U
W/chip Conveyor, CNC Control, Burn Wk 5805-c25, 48 Position Tool Changer, (11775#) 102x117x106, (2365#) 83x82x83, (380#) 93x23x55, (230#) 32x29x53, *contains 4 Pieces
- Trusted Seller
2024 Kingston CJ30160C
- Manufacturer: Kingston
- Model: CJ30160C
Swing Over Bed 29.9” Swing Over Cross Slide 21.8” Swing in Gap 40.9” Gap Width from Faceplate 11.8” Width of Bed 18.9” Distance between Centers 160” Spindle Nose A2-11 Spindle bore 6.1” Number of Speed Ranges 1 S...
- Trusted Seller
2017 Goodway GS-2000YS
- Manufacturer: Goodway
- Model: GS-2000YS
MACHINE EQUIPPED WITH Chip conveyor Oil chiller Parts catcher Renishaw tool setter HPMA Goodway 12 station built-in motor live tooling turret CS-axis with disk brake on main & sub spindles (live sub spindle) Live...
Chicago, IL - Trusted Seller
2015 Okuma LU4000 EX
- Manufacturer: Okuma
- Model: LU4000 EX
Missing Controller Equipped With: Chip Conveyor **Have Inspection Report from Gosiger** Machine is unable to be powered on due to, The machine is missing the front control panel, computer hard drive and hardware....
Bridgeport Proto-Trak 2 Axis CNC DRO Z vertical Knee Milling machine Prototrak
- Manufacturer: Bridgeport
BRIDGEPORT Cnc Mill.. You are looking at a very Clean Bridgeport Milling Machine with A Prototrak MX2 controller on it. This machine has a power drawbar and is ready to put in your shop and make you Money.. if yo...
ALORIS MODEL CXA QUICK CHANGE TOOL POST No Holder
- Manufacturer: Aloris
This is an ALORIS Model CXA Quick Change Tool Post that includes only the toolpost. It is manufactured in the United States and belongs to the brand Aloris. This tool post allows for quick and easy tool changes, ...
$359 USDOregon, OHAloris CA Quick Change Tool Post With CA 54 Morse Taper Holder
- Manufacturer: Aloris
The Aloris CA Quick Change Tool Post comes with a CA 54 Morse Taper Holder. It is designed for efficient tool changes in metalworking machinery. The quick-change feature allows for rapid switching between differe...
$550 USDOregon, OH
Daewoo Puma 230C CNC Lathe
- Manufacturer: Daewoo
- Model: Puma 230C
Good condition Daewoo Puma 230C CNC Lathes available between 2000 and 2001 years. Located in USA and other countries. Click request price for more information.
USA
