Machine Tools

Search By Category

Search By Manufacturer

Search By Country

Building Filters

19468

Used a frames

  • Trusted Seller
    KOMATSU OBS80-2 #0345525

    KOMATSU OBS80-2 #0345525

    • Manufacturer: Komatsu
    • Model: OBS80-2

    MO RECIPROCATING LUBE SYSTEM FOOT ISOLATION PADS Del: OBS80-2 | Tonnage: 88 | Stroke: 5.12" | Shut-height: 13.78" | Adjustment: 3.15" | Spm: 37-75 VARIABLE SPEED, INCH,SINGLE,CONTINUOUS | Bed size: 39.37" X 23.62...

    Toledo, OH
  • Trusted Seller
    1995 MINSTER #7 #0951821

    1995 MINSTER #7 #0951821

    • Manufacturer: Minster
    • Capacity: 75,000 kg
    • Stroke length: 76.2 mm

    Machine Specifications Tonnage capacity: 75 TONS | Stroke: 3" | Slide adjustment: 3.5" | Shutheight: 18" | Bed & ram size: 36" X 24" | Speed: 150 SPM

    Toledo, OH
  • Trusted Seller
    1987 NIAGARA E-150-S #1704520

    1987 NIAGARA E-150-S #1704520

    • Manufacturer: Niagara
    • Model: E-150-S

    • Model E-150-S • Capacity 165 Tons • Stroke 6” • Shut Height 20.5” • Adjustment 6” • Bed size 30” x 50” • Slide size 24” x 34” • SPM 40 • Year 1987

    Toledo, OH
  • Trusted Seller
    KOMATSU OBS200S #1704720

    KOMATSU OBS200S #1704720

    • Manufacturer: Komatsu
    • Model: OBS200S

    • Model OBS 200S • Capacity 220 Tons • Stroke 9.8” • Shut Height 18.9” • Adjustment 4.7” • Bed size 35” x 57” • Slide size 25.6” x 33.5” • SPM 25-50 • Year 1989

    Toledo, OH
  • Trusted Seller
    1963 VERSON ............................................ 12 F

    1963 VERSON ............................................ 12 F OBI #0507719

    • Manufacturer: Verson
    • Model: 12 F
    • Capacity: 250 kg
    • Stroke length: 304.8 mm

    TRIAD 3200 CONTROL MAYA TONNAGE MONITOR MOUNTED PALM BUTTONS.

    Toledo, OH
  • Trusted Seller
    New Baldor Reliance Motor –

    New Baldor Reliance Motor – 10 HP 1800 RPM – 215TC Frame

    • Manufacturer: Baldor - Reliance

    NEW Baldor Reliance Motor This listing is for a Baldor Reliance motor. This motor was for a Wysong Press Brake. Below are the specifications on the motor. This motor broke away from its secure points during trans...

    Mukilteo, WA
  • Trusted Seller
    KOMATSU OBS-200 #0882425

    KOMATSU OBS-200 #0882425

    • Manufacturer: Komatsu
    • Model: OBS200

    CUSHON REMOVED FOR FLOOR STANDING OPERATION Tonnage: 220 TON | Stroke: 9.84" | Shut height: 18.90" | Slide adjustment: 4.72" | Strokes per minute: 25 - 50, INCH, SINGLE, CONTINUOUS | Ram dimensions: 33.47" L - R ...

    Toledo, OH
  • Trusted Seller
    1983 NIAGARA E-250 #1114524

    1983 NIAGARA E-250 #1114524

    • Manufacturer: Niagara
    • Model: E-250
    • Capacity: 250,000 kg
    • Stroke length: 254 mm

    Capacity: 250 TONS | Stroke: 10" | Shut height: 21" | Slide adjustment: 6" | Strokes per minute: 32 SPM | Slide area: 36" LR X 28" FB | Bed area: 58" LR X 34" FB | Controls: INCH, SINGLE, CONTINUOUS | Air clutch...

    Toledo, OH
  • Trusted Seller
    NIAGARA E-90-S #1704620

    NIAGARA E-90-S #1704620

    • Manufacturer: Niagara
    • Model: E-90-S

    • Model E-90-S • Capacity 100 Tons • Stroke 4.5” • Shut Height 15.75” • Adjustment 4.5” • Bed size 25” x 39” • Slide size 20” x 27.5” • SPM 46 • Year 1989

    Toledo, OH
  • ADF FOUR HEAD ROTARY BRUSH

    ADF FOUR HEAD ROTARY BRUSH POLISHER

    • Manufacturer: ADF

    Inventory id: 20064400000 | Material width: 24 | Motor data: 5 HP, 1750 RPM, 208/230/460 VAC, BALDOR, 184TC FRAME | Belt size: 14.5" DIAMETER BRUSH DISC | Previous use: SHEET SURFACE PREP FOR CLADDING LINE

    Pittsburgh, PA
  • Trusted Seller
    OTINUS PRO: HYDRAULIC PRESS BRAKE

    OTINUS PRO: HYDRAULIC PRESS BRAKE 242 T x 145" DELEM DA-69T

    • Manufacturer: Otinus
    • Model: PBO-3722-DA69
    • Stroke length: 406.4 mm
    • Daylight: 609.6 mm

    The OTINUS PRO Hydraulic Press Brake, model PBO-3722-DA69, is a new, robust machine tailored for intricate sheet metal bending tasks. It features the advanced Delem DA-69T controller, which supports 2D and 3D gra...

    Illinois, USA
  • Trusted Seller
    Auction
    Piranha 35-C Throat Hydraulic Press

    Piranha 35-C Throat Hydraulic Press 35-Ton, 5-HP Hydraulic Pump, 11" x 21" Table, Foot Pedal Switch...

    • Manufacturer: Piranha

    Piranha 35-C Throat Hydraulic Press 016 35-Ton, 5-HP Hydraulic Pump, 11" x 21" Table, Foot Pedal Switch, Steel Frame Base Working Condition Unknown - The running and operating condition of the equipment is unknow...

    Saginaw, MI
    Visit Auction Website
  • Trusted Seller
    ABB 3GAA202-001BDA

    ABB 3GAA202-001BDA

    • Manufacturer: ABB

    ABB 35KW Motor M2AA200MLA4, IEC 200 M/L55, Code 3Gaa202-001-BDA 440 Volt NOTE: 3-Phase Squirrel Cage Motor with 4 Poles. F.O.B. Cincinnati, OH

    Cincinnati, OH
  • Trusted Seller
    2009 BAYKAL APHS Compact 3106

    2009 BAYKAL APHS Compact 3106 x 120

    • Manufacturer: Baykal
    • Model: APHS 3106 × 120
    • Capacity: 135,000 kg

    Equipped With: ESA EC4 4-Axis CNC Control 2-Axis CNC Back Gauge (X,R,) Electric Foot Switch Control (2) Front Support Arms Electric Foot Switch Control Pedestal Palm Button Control Laser Bending Security Miscella...

    Schaumburg, IL
  • TRQ-855 HYDRAULIC PRESS TYPE H

    TRQ-855 HYDRAULIC PRESS TYPE H MODEL HPV100, CAPACITY 110 TON, WANZKE FRAME

      WANZKE (Germany) Hydraulic press type H model HPV100, capacity 110 Ton, table 21" x 27.5", ram 21" x 26", 6" stroke, max. opening 18", air cushion 10 ton, motor 18.5 Kw, s/n. EF97

      Guadalupe, Mexico
    4647484950

    Overview

    Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

    FAQ

    What should I consider when buying a used machine tool?

    Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

    How do I ensure the machine tool is shipped safely to my location?

    Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

    What is the maintenance schedule for machine tools?

    Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.