• NORTHTECH NT-16R TILTING ARBOR TABLE SAW

    $4,250 - United States
    • Manufacturer: Northtech

    rigger: not required | electric: 220 volt 60 cycle 1 phase

  • NORTHTECH NT-152A SINGLE END TENONER

    $5,000 - United States
    • Manufacturer: Northtech

    midwest northtech nt-152a single end tenoner:several times a year we get machines that are “near new” and were never put into production due to a dropped product line, change in assembly method, or...

  • NORTHTECH NT-152P SINGLE END TENONER

    $5,995 - United States
    • Manufacturer: Northtech

    midwest 1-used northtech nt-152p single end tenoner. tenon cutter-head - both top and bottom tenon heads can be individually or simultaneously vertically adjusted. individual cross adjustment in 1 ...

  • NORTHTECH Single-Spindle Shaper w/Power Feeder

    $1,750 - United States
    • Manufacturer: Northtech

    southeast us northtech single-spindle shaper w/power feeder:7.5hp, 230v, 3ph spindle motor27-1/2 inch x 35-1/2 inch tablefence adj. on both sides1-1/4 inch diameter spindleapprox. 5 inch under spin...

  • NORTHTECH CS-18R UP-CUT SAW

    No price - United States
    • Manufacturer: SCM

    1-used northtech nt-cs-18 cut-off saw. with 10hp main motor 230v magnetic controls. with 3600 rpm, 2" x 12", 3" x 11" . 4" x 10" capacity, 70 cycles per minute. with pneumatic foot pedal actuation ...

  • 2009 NORTHTECH EM 250 END MATCHER [EM-010116]

    $17,800 - United States
    • Manufacturer: NORTHTECH

    north-tech em-250 end matcher with the following working dimensions: 1.6" - 10" width x 0.4" to 1.38" thickness x 10.6" min. length capacity; unlimited lengths possible. -- feed speeds to 295 fp...

  • 2007 NORTHTECH NT-400XL DOUBLE HEAD PLANER [PD-010693]

    $19,800 - United States
    • Manufacturer: NORTHTECH
    • Elect./Voltage: 460 V, 60 Cy, 3 Ph.

    northtech model nt 400xl double planer: -- 16" x 6" opening, 25 hp top & 15 hp bottom motors v-belted to cutter heads, min. stock thickness 1/4". -- equipped with: spiral carbide insert knife cut...

  • 2007 NORTHTECH NT-400XL DOUBLE HEAD PLANER [PD-010692]

    $17,800 - United States
    • Manufacturer: NORTHTECH
    • Elect./Voltage: 460 V, 60 Cy, 3 Ph.

    northtech model nt 400-xl16" x 6" with the following equipment: -- opening, 25 hp top & 15 hp bottom motors v-belted to cutter heads (draws 70 amps max), min. stock thickness 1/4". -- equipped wi...

  • 2008 NORTHTECH NT-SRS-12 STRAIGHT-LINE RIP SAW [RS-011134]

    $9,450 - United States
    • Manufacturer: NORTHTECH

    northtech nt-srs12 straight line rip saw: 15 hp - 4,500 rpm direct drive overhead mounted arbor motor, 1" dia. arbor, 8" - 12" max. blade cap., 3-3/8" max. depth of cut, 8" min. part length. specif...

  • 2007 NORTHTECH NT-610XL/SLRS 25 PLANING AND SLR RIPPING SYSTEM [PD-010691]

    $79,500 - United States
    • Manufacturer: NORTHTECH

    northtech nt-610sc-1 top & bottom planer -- capacities: 24" wide x 7.5" thick capacity; 1/4" minimum thickness; 12" minimum stock length -- cutterheads: 40 hp top head; 30 hp bottom head; 5,800 r...