Used Extruders

3.4″ Davis Std. Extruder (Recently Rebuilt)

• Manufacturer: Davis-Standard

3.4″ Davis Std. Extruder (Recently Rebuilt) 50 HP AC Motor with AC Drive – rated up to 100 HP 24:1 L/D Ratio – Non-Vented Eurotherm Controllers Screw in Good Condition NOTE: Rebuilt and painted 2 years ago, never...

3.5″ Davis Std. Rubber Extruder – New 2006

• Manufacturer: Davis-Standard

3.5″ Davis Std. Rubber Extruder – New 2006 Model 35IN35DSRE 20:1 L/D Ratio Gearbox Ratio: 17.39.1 257 HP DIMENSIONS: 66″W x 120′ L x 78″ High Dyn. Thrust Cap. 408,300 lb. Dyn Thrust Cap. 185,204 KG Liters: 6 WE...

Industrial Plastic Extruder – Johnstech 50mm, 28:1 L/D, Variable Speed

• Manufacturer: Johnstech

10678044 Used Johnstech Single Screw Extruder; Screw diameter 50mm L/D 28:1; Model XJ50 -28D; 22kw AC Motor 415v With Variable Speed Drive; Speed range 10 to 150rpm; Complete with Electrical Panel; Last used to m...

Dr. Collin ZK25×24/42D Twin-Screw Extruder for Sale

• Manufacturer: Dr. CollinDr. Collin

54037001 Used Dr. Collin ZK25x24/42D Twin Screw Extruder. 25mm Diameter screws. 42:1 L/D. Maximum screw speed 521 RPM via a gearbox by a 30kW motor. 7 housing sections. Electrically heated, water cooled. Approxim...

3.5″ Polytruder 24:1 Air Cooled Extruder

6″ Davis Standard 30:1 Extruder

• Manufacturer: Davis-Standard

4.5″ Davis Standard Extruder MV45IN45 1997

• Manufacturer: Davis-Standard

4.5″ Davis Std. Extruder MV45IN45 – New 1998 Water Cooled 24:1 N-Vented

Insta-Pro Model 2000 RC Continuous Extruder – 125 HP Motor, High-Capacity Processing

• Manufacturer: Insta-ProInsta-Pro

53147054 Used Insta-Pro Model 2000 RC Continuous Extruder. Rated capacity approximate 1,300 - 3,840 pounds per hour. Includes extruder barrel and main worm shaft assembly. Driven by 125 HP motor. ...

1 1/4″ Davis Standard Extruders (Stripers) 4 Available

• Manufacturer: Davis-Standard

Gloucester 2.5" Single Screw Extruder – 32:1 L/D, Air-Cooled & Vented

• Manufacturer: GloucesterGloucester

10755144 Used Gloucester 2.5" Extruder 32:1 L/D five (5) zone air cooled and vented barrel at a 45" centerline height. Top center feed throat. Driven by a 50 HP A/C 1750/2100 RPM motor, includes 6 zone temperat...

2.5″ Akron/EDS Akron 36:1 Extruder Reconditioned

2.5″ Akron/EDS Akron 36:1 Extruder Reconditioned 42″ Centerline – 36:1 L/D Ratio – 6″ x 3.5″ feed throat, Belt Driven through a 13.95:1 Koellman PEZS 360/3.5 Gearbox, Rated to 125 HP, 75 HP Baldor DC Motor with R...

3.5″ Davis Std. 75 HP Air Cooled Extruder

• Manufacturer: Davis-Standard

1997 Davis Standard 3.5 Inch Single Screw Extruder:

Leistritz ZSE 100 GLAAX 100mm Co-Rotating Twin Screw Extruder

• Manufacturer: Leistritz

10151570 Used Leistritz ZSE 100 GLAAX 100mm Co-Rotating Twin Screw Extruder, Driven by 330 kw (442 hp), 1600 rpm DC motor with SCR control. Has 300 rpm screw speed, rated at 5000 Newton meters per shaft torque c...

3.5″ Davis Std. 30:1 Air Cooled Extruder

• Manufacturer: Davis-Standard

3 1/2” Davis Standard 30:1 150 H.P. A.C. Air Cooled 350 to 400 # per HR. Material Poly No Clamp Bolt on Front End 17:1 Gear Ratio 100 RPM 5 Barrel Zones 4 Die Zones