Used Extruders

DAVIS STANDARD 4.5″ 30:1 L/D 18936

• Manufacturer: Davis-Standard

One (1) used Davis Standard model 45IN45 extruder. S/N M3315. Shop order 05432. Extruder has 30:1 L/D ratio with a six (6) zone electrically heated, air cooled, and non-vented barrel at a 42″ center-line. Gearbox...

DAVIS STANDARD 130mm 32:1 L/D 18933

• Manufacturer: Davis-Standard

One (1) used Davis Standard 130 mm (5.1″) model 130IN45HT extruder. S/N 14844. Shop order 70693. Extruder has 32:1 L/D ratio with a seven (7) zone electrically heated, air cooled, and non-vented barrel at a 42″ c...

COPERIAN ZSK-40 40MM TWIN SCREW 18943

Used 40mm Coperion Type ZSK-40-Mega co-rotating twin screw extruder. S/N 07-3059. New in 2008. No barrels or screws included. Driven by 200 HP 1790 RPM A/C motor with Powerflight VFD controller. Has 1.155 gear ra...

GLOUCESTER 2522 2.5″ 32:1 L/D 17805

One (1) Used Gloucester model 2522 R2 2.5″ 32:1 L/D extruder with an electrically heated, water cooled (closed loop) vented and plugged barrel at approximately a 72″ center line height. Gearbox has a reduction ra...

EGAN 3.5″ 32:1 L/D 150 17807

• Manufacturer: Egan

One (1) used 3.5″ 32:1 L/D Egan extruder having an electrically heated, water cooled (closed loop), top vented, and plugged barrel at an approximate 52″ center line height. Philadelphia gearbox has a reduction ra...

WERNER & PFLEIDERER ZSK40 TWIN 17698

• Manufacturer: WP

Werner & Pfleiderer Model ZSK40 40mm co-rotating twin screw extruder, S/N 180399, 1990 model year, 46:1 L//D vented barrel with 11 barrel sections and a 41″ centerline. Driven by a 50 HP 500-volt 1750/2100 RPM D/...

WELEX 6″ 36:1 L/D 500 18830

• Manufacturer: Welex

One (1) used Welex model 6.0 36D 6″ 36:1 L/D extruder. S/N 6492. Having an electrically heated, water cooled (closed loop), and vented barrel at an approximate 66″ center line height. Koellman model Unex 8.13 gea...

GLOUCESTER 4.5″ 30:1 250 HP 18227

One (1) used Gloucester model 244-001 4.5″ 30:1 L/D extruder having an electrically heated, air cooled, and non-vented barrel at an approximate 56″ center line height. Cool Touch heaters with integral blowers wer...

DAVIS STANDARD 130mm 32:1 L/D 18935

• Manufacturer: Davis-Standard

One (1) used Davis Standard 130mm (5.1″) model 130IN45HT extruder. S/N U7644. Shop order 58491. Extruder has 32:1 L/D ratio with a seven (7) zone electrically heated, air cooled, and non-vented barrel at a 42″ ce...

DAVIS STANDARD 10″ 38:1 L/D 18953

• Manufacturer: Davis-Standard

Used Davis Standard Model 100TH100D 10″ 38:1 L/D extruder. Having a eight (8) zone electrically, heated, water cooled and non-vented barrel at a nominal 44″ center-line. S/N L3201. Shop Order 03643. Gearbox has a...

JOHNSON 1.5 8891

• Manufacturer: Johnson

Johnson 1-1/2″ extruder, 24:1 L/D. Non-vented barrel mounted on a base for co-extrusion. 10HP DC motor with no controls. S/N 7619-15. 11.32:1 gear box, 41 HP with a 1.25 service factor. No barrel cooling.

JOHNSON 1.5″ 8786

• Manufacturer: Johnson

Johnson 1-1/2″ extruder 24:1 L/D, non-vented barrel mounted on base for co-extrusion. 10HP DC motor with no controls. 11.32:1 gear box rating at 41HP with a 1.25 service factor. No barrel cooling. S/N 7621-15

BRABENDER IT7150 3/4″ & 1″ 19044

• Manufacturer: Brabender

Blades Stock No. 19044 – Brabender model Intelli-Torque IT7150 extruder. Currently installed 24:’ L/D barrel with 3/4″ screw and included spare 30:1 L/D barrel with 1″ screw. 2003 model year. Includes one each 4″...

6″ Davis Standard 60IN60TPIH 30:1 500 HP VENTED EXTRUDER

• Manufacturer: Davis-Standard

DAVIS STANDARD 150IN 1.5″ 24:1 17708

• Manufacturer: Davis-Standard

Davis Standard model 150IN DS-20 1.5″ extruder, S/N J6173, 1984 model year, 24:1 L/D vented barrel at a 42″ centerline. Davis Standard 6.53:1 gearbox rated for 50 HP with a service factor of 1.25 for a 152 RPM sc...