Used Lathes in Germany

Bezel from Stankoimport – 36642.M44 Diameter 75 mm 36526

• Manufacturer: Stankoimport

steady rest, steady rest, lynette Bezel: max. passage Ø 75 mm | Type: 36642.M44 | Tip height: approx. 125 mm see photos | Dimension ges.: 135/310/260 mm | Mass: 7,3 | Dimensions: 135/310/H260 mm

Face plate from – Ø 450 mm 36432

Faceplate, faceplate chuck, four-jaw chuck, facing chuck

Interchangeable jaws top jaw set from – width 20 mm 35441

interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws

FORKARDT F 200 Wedge Bar Chuck

3-jaw chuck with 1 set of drill jaws Short cone mount size 6 (bolt circle 133.4mm) Bayonet Lock Feed wrench Diameter 200 mm Height 150 mm Passage 55 mm Machine weight approx. 30kg

FORKARDT F 200 Wedge Bar Chuck

• Manufacturer: Tornos

3-jaw chuck with 2 sets of drill jaws Short cone mount size 11 (bolt circle 235mm) Bayonet Lock Feed wrench Diameter 500 mm Height 250 mm Passage 150 mm Machine weight approx. 0.2 t Dimensions L x W x H 0.5 x 0.5...

Interchangeable jaws 3 set from Forkardt – width 45 mm helical toothed 36345

• Manufacturer: Forkardt

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws wedge bar chucks, interchangeable jaws power chucks

Steady rest moving from – center height 145 mm 35225

Steady rest travelling, travelling steady rest, steady rest, steady rest, lynette

Lathe S 460

Condition: New machine Rotation diameter over bed [mm]: 460 Center distance [mm]: 1500 Spindle bore [mm]: 80 Main drive [kW]: 5.5 Speed range [1/min]: 25-2000 Swing diameter over support [mm]: 274 Rotation diamet...

Lathe S 410

Condition: New machine Rotation diameter over bed [mm]: 410 Center distance [mm]: 1000 Spindle bore [mm]: 52 Main drive [kW]: Swing diameter over support [mm]: 255 Swing diameter in offset [mm]: 580 Speed range [...

POTISJE PD 1250 Big lathe, swing 1300 x 6000 mm

• Manufacturer: Potisje

swing over bed 1300 mm, over cross slide 1000 mm dbc 6000 mm bore 130 mm speed 1,6 - 630 1/min, stepless in 3 ranges

Lathe TOS SN 32

• Manufacturer: TOS

Circumferential diameter over bed [mm]: 330 Rotation diameter over support [mm]: 168 Center distance [mm]: 1000 Speed range [1/min]: 14-2500 Equipment / accessories: Taper guide device, lathe chuck, safety devices

STANKO 16K40 Lathe

• Manufacturer: Stankoimport

swing over bed 800 mm, over cross slide dbc 3000 mm speed 10-1250 U/min. bore 105 mm tailstock MK 6

Lathe Potisje PD 1250

Swing diameter over bed [mm]: 1300 Center distance [mm]: 6000 Spindle bore [mm]: 130 Main drive [kW]: 45 Swing diameter over support [mm]: 1000 Speed range [rpm]: 1.6 - 630 Workpiece weight between centers [kg]: ...

Lathe C11MC

Circumferential diameter over bed [mm]: 600 Rotation diameter over support [mm]: 400 Center distance [mm]: 2000 Speed range [1/min]: 20 - 2000 Spindle bore [mm]: 80 Main drive [kW]: 7.5 Equipment / accessories: C...

Oerlikon DMO 8 lathe

• Manufacturer: Oerlikon - Leybold
• Spindle bore: 45 millimeter

Lead and feed screw turning machine Oerlikon DMO 8 incl. extensive accessories ! used, tested !