Processing » Industrial Furnaces & Ovens

Search By Manufacturer

Search By Country

Building Filters

5144

Used Industrial Furnaces & Ovens

  • Trusted Seller
    Heller 1400 MK5 S MK3

    Heller 1400 MK5 S MK3 2020 4 Zone Curing Oven 208V # 59124-02

    • Manufacturer: Heller

    Heller 1400 MK5 S MK3 208V # 59124-02 Extremely small footprint Convection oven Left to Right Edge Rail with oiler Machine was designed to cure an underfill and dam-fill / glob top epoxy process. Machine has adde...

    $19,500 USD

    Get financing

    Est. $383/mo

    Longwood, FL
  • BEAVERMATIC 7 X 7 X

    BEAVERMATIC 7 X 7 X 10 GCBF

    • Manufacturer: BEAVERMATIC

    HEAT (4,100,000 BTU/HR MAX TOTAL 5-7 PSI) IS SUPPLIED BY (9) NOZZLE MIX BURNERS WITH SPARK IGNITION AND FLAME SAFETY FIRING FROM ABOVE AND BELOW WORK AREA.. INTERIOR IS LINED WITH LIGHT WEIGHT REFRACTORY. CAR I...

    Tolland, CT
  • HARPER

    HARPER

    • Manufacturer: Harper

    ATMOSPHERE BOX FURNACE WITH SIDE SWING DOOR, BRICK LINED INTERIOR AND ALLOY RETORT THAT CAN BE SEALED SO ONLY ATMOSPHERE GAS WILL BE IN THE RETORT. HEATING ELEM...

    Tolland, CT
  • FALCON

    FALCON

    • Manufacturer: Falcon RME

    ELECTRIC BOX FURNACE WITH ALLOY RETORT AND FRONT PLUG DOOR ATTACHED TO ROLL AWAY STAND

    Tolland, CT
  • SURFACE COMBUSTION 1HVTF364824-1

    SURFACE COMBUSTION 1HVTF364824-1

    • Manufacturer: SURFACE COMBUSTION

    HORIZONTAL DOUBLE WALLED WATER COOLED CHAMBER WITH SINGLE SIDE SWING BOLT DOWN FRONT DOOR. WHEN PROCESS BEGINS VACUUM PUMPS EVACUATE THE VESSEL. WHEN COMPLETE VESSEL IS BACK FILLED WITH NITROGEN. ...

    Tolland, CT
  • HURRICANE SYSTEMS (MIDBROOK) 5024

    HURRICANE SYSTEMS (MIDBROOK) 5024

    • Manufacturer: Midbrook

    GAS FIRED BELT WASHER. ALL STAINLESS STEEL CONSTRUCTION WITH 24"WIDE VARIABLE SPEED FLAT WIRE BELT. PARTS ARE LOADED ON BELT IN THE OPEN LOAD AREA TRAVEL THROUG...

    Tolland, CT
  • KOIKE-ARONSON MGM3100

    KOIKE-ARONSON MGM3100

    • Manufacturer: Koike Aronson

    NEW 2004 CAPACITY 3100MM (122") ORDER # S0178105 HYPERTHERM HYSPEED HT2000 POWER SUPPLY

    Tolland, CT
  • ABBOTT 8ZSCR-12-216HH5-86PC/H3-2100

    ABBOTT 8ZSCR-12-216HH5-86PC/H3-2100

    • Manufacturer: Abbott

    12"WIDE ATMOSPHERE BELT FURNACE WITH ALLOY RETORT CURRENTLY USING A 10"WIDE BELT. PARTS ARE LOADED ON THE VARIABLE SPEED MESH BELT AT 6'LONG ENTRANCE TABLE, PASS THROUGH 3' ENTRANCE PURGE, 18' HEAT CHAMBER, 7' H...

    Tolland, CT
  • DESPATCH

    DESPATCH

    • Manufacturer: Despatch

    SYSTEM CONSISTS OF (2) ELECTRICALLY HEATED 1250 F MAX PIT FURNACES (38"DIA X 48"DEEP, 48"DIA X 60" DEEP), AIR QUENCH TANK, WATER QUENCH TANK AND OVER HEAD CRANEWAY WITH CRANE (CRANE NEEDS REPAIR). PREVIOUSLY USED...

    Tolland, CT
  • SINTERITE 12E-6Z

    SINTERITE 12E-6Z

    • Manufacturer: SINTERITE

    SIX ZONE HYDROGEN/NITROGEN ATMOSEPHERE BELT FURNACE WITH CERAMIC BELT. ZONE 1-3 (16'L) IS HEATED BY SILICON CARBIDE HEATING ELEMENTS WITH ALLOY MUFFLE. ZONE 3-6 (14'L) IS HEATED BY MOLYBDENUM WIRE WOUND HEATI...

    Tolland, CT
  • ABBOTT 8ZSCR-36-192PH4-240HH4-VC-2150

    ABBOTT 8ZSCR-36-192PH4-240HH4-VC-2150

    • Manufacturer: Abbott

    TWO ARGON/HYDROGEN ATMOSPHERE 36” BELT FURNACES WITH SILICON CARBIDE MUFFLE IN HIGH HEAT SECTION. PARTS ARE LOADED ON VARIABLE SPEED MESH BELT AT 6'LONG LOAD A...

    Tolland, CT
  • THERMAL INNOVATIONS

    THERMAL INNOVATIONS

    • Manufacturer: THERMAL INNOVATIONS

    DOUBLE DOOR OPENING AT FRONT AND REAR. SYSTEM WAS DESIGNED TO DRY 5" ALUMINUM WEB @ 1.5 TO 15 FPM USING IR ( THREE ZONES RATED 3 KW EACH) AND CONVECTION ( ONE ZONE RATED 18 KW) WITH 3 HP FAN THAT FEEDS NOZZLES ON...

    Tolland, CT
  • Precision C1D1 Booth 20.5 x

    Precision C1D1 Booth 20.5 x 14 x 9'

      Used Walk-in C1D1 Booth 20x14x8' Still assembled in the facility, needs to be disassembled. Comes with: - Lights - Entry Door - Shell Panels - Original Hardware Equipment inside booth also for sale! See other ...

      $15,000 USD

      Get financing

      Est. $295/mo

      Georgia, USA
    • Trusted Seller
      Blue M POM-260B-1 Bake Oven

      Blue M POM-260B-1 Bake Oven 18x20x20" Max Temp 343c, Serial # P14-4450

      • Manufacturer: Lindberg/Blue M

      Blue M POM-260B-1 SN P14-4450 Max temp 343C / 650F Temp control / Over temp controller Tested and working order 208V-240V 1ph 19a I.D. 18 inches deep X 20 inches wide X 20 inches high, inside is stainless steel20...

      $1,950 USD
      Longwood, FL
    • LUCIFER 82AM-I12 Dual Chamber Electric

      LUCIFER 82AM-I12 Dual Chamber Electric Heat Treating Oven Furnace #8103

      • Manufacturer: Lucifer Furnaces

      LUCIFER 82AM-I12 Dual Chamber Electric Heat Treating Oven Furnace #8103 Vertical lift door with counterweights Horizontal door Fan assembly with motor Honeywell Digital Temperature Control Machine is wired for 23...

      $4,450 USD
      Sarasota, FL
    • no-image_en.png

      Sacmi KMS 2070/80.0 Industrial Furnaces & Oven

      • Manufacturer: Sacmi
      • Model: KMS 2070/80.0

      Good condition Sacmi KMS 2070/80.0 Industrial Furnaces & Ovens. Located in Italy and other countries. Click request price for more information.

      Italy
    4142434445

    Overview

    Industrial furnaces and ovens are essential for various manufacturing processes, including metalworking, ceramics, and chemical production. These high-temperature units are designed for tasks such as heat treating, drying, and curing materials. They come in various sizes and configurations to meet specific industrial needs, offering precise temperature control and efficiency.

    FAQ

    What should I consider when buying an industrial furnace or oven?

    Consider the temperature range, fuel type, size, and capacity requirements, as well as any specific features needed for your application. Checking the unit's energy efficiency and control systems is also crucial.

    How do I ensure the industrial furnace or oven is shipped safely to my location?

    Use a reputable transport service experienced in handling heavy industrial equipment. Ensure the unit is securely packed and that all components are well-protected against damage during transit.

    What is the maintenance schedule for an industrial furnace or oven?

    Regular maintenance includes inspecting and cleaning heating elements, checking temperature controls, and ensuring proper ventilation. Refer to the manufacturer's manual for specific maintenance tasks and intervals.