Building Filters

284

Used Okuma in Japan

  • Trusted Seller
    2009 OKUMA GP-47FIIx1500

    2009 OKUMA GP-47FIIx1500

    • Manufacturer: Okuma
    • Model: GP47

    Machine specification ○NC Device OKUMA OSP-U10G ○Capacity Swing x Center distance φ430mm x L1500mm [Max. grinding diameter φ400mm] ○Wheel Outer diameter φ760 x width 150mm Grinding wheel peripheral speed 45m/sec ...

    Tokyo, Japan
  • Trusted Seller
    2009 OKUMA LB4000EX-1500

    2009 OKUMA LB4000EX-1500

    • Manufacturer: Okuma
    • Model: LB4000 EX
    • Spindle bore: 52 mm

    Machine Specifications ○NC Unit OSP-P200L ○Spindle Chuck: 12-inch Hollow Chuck, Kitagawa B-212 Through Hole: φ80mm, Inside Draw Tube Spindle Speed: 42-4200 rpm Motor: 30/22 kW ○Capacity Swing Over Bed: φ670mm Max...

    Tokyo, Japan
  • Trusted Seller
    2020 OKUMA GENOS M560-V

    2020 OKUMA GENOS M560-V

    • Manufacturer: Okuma
    • Model: Genos M560-V

    Machine specification ○NC Device OSP-P300MA ○ Table Size of work surface 1300mm×560mm Maximum loading weight 900kg ○ Travel X-axis 1050mm Y-axis 560mm Z-axis 460mm ○ Spindle BT40 Spindle speed 12000rpm 20 ATCs Mo...

    Tokyo, Japan
  • Trusted Seller
    2016 OKUMA GENOS L400H

    2016 OKUMA GENOS L400H

    • Manufacturer: Okuma
    • Model: GENOS L400
    • Spindle bore: 52 mm

    Machine Specifications ○NC Control OSP-P300L ○Spindle Chuck: 12-inch, 3-jaw, solid, Kitagawa N-12 Spindle Speed: 3000 rpm Motor: 11/7.5 kW ○Capacity Swing Above Bed: φ520 mm Maximum Workpiece: φ390 mm x L500 mm ○...

    Tokyo, Japan
  • Okuma LT

    Okuma LT

    • Manufacturer: Okuma
    • Model: LT

    If there is a difference between the content and the actual item, the actual item will be given priority.

    Tatebayashi, Japan
  • Okuma LS

    Okuma LS

    • Manufacturer: Okuma
    • Model: LS

    10-inch 3-jaw chuck, 800 rpm between centers, spindle speed 35-1800 rpm If there is any discrepancy between the content and the actual product, the actual product will take precedence.

    Tatebayashi, Japan
  • 2005 Okuma LCS-250

    2005 Okuma LCS-250

    • Manufacturer: Okuma
    • Model: LCS-250

    OPS-E10L-B 8-inch 3-jaw hollow chuck (Kitagawa/B-208) 8-sided turret with tool presetter Right-hand chip conveyor Easy dialogue included If there is a discrepancy between the contents and the actual product, the ...

    Tatebayashi, Japan
  • 2003 Okuma LB300-MY

    2003 Okuma LB300-MY

    • Manufacturer: Okuma
    • Model: LB300 MY

    OSP-E100L 8-inch 3-jaw hollow chuck (Kitagawa/B-208) 12-sided compound turret with Y axis, center, tool presetter, right-hand chip conveyor If there is a discrepancy between the contents and the actual product, t...

    Tatebayashi, Japan
  • 2003 Okuma LCS-15

    2003 Okuma LCS-15

    • Manufacturer: Okuma
    • Model: LCS-15

    OSP-E10L 8-inch 3-jaw hollow chuck (Kitagawa/B-208) 8 square turret with center Post-loading chip conveyor If there is any discrepancy between the content and the actual product, the actual product will take prio...

    Tatebayashi, Japan
  • 2001 Okuma LB400

    2001 Okuma LB400

    • Manufacturer: Okuma
    • Model: LB400

    OSP-U100L 10-inch 3-jaw chuck (Kitagawa/B-210) 12-sided turret Spindle through diameter 70 Center distance 700 With center With tool presetter With dialogue ★X-axis bearing replacement If there is a discrepancy b...

    Tatebayashi, Japan
  • 2003 Okuma LB200-MY

    2003 Okuma LB200-MY

    • Manufacturer: Okuma

    OSPE-100L Collet chuck (50φ) 12 square turret (with Y-axis) With tool presetter With parts conveyor With parts catcher Auto bar 1m specification (ASQ-51) If there is any difference between the contents and the ac...

    Tatebayashi, Japan
  • 2005 Okuma LU300

    2005 Okuma LU300

    • Manufacturer: Okuma
    • Model: LU300

    OSP-E100L 12-inch chuck Upper: 12-sided Lower: 8-sided With center Right-hand chip conveyor Center distance 600 If there is a discrepancy between the contents and the actual product, the actual product will take ...

    Tatebayashi, Japan
  • Okuma Iron Works LS

    Okuma Iron Works LS

    • Manufacturer: Okuma
    • Model: LS

    450φ4 jaw single action chuck Spindle speed 19-1000rpm 800 between centers Swing on bed 540 If there is any discrepancy between the contents and the actual product, the actual product will take priority.

    Tatebayashi, Japan
  • Okuma Iron Works LS

    Okuma Iron Works LS

    • Manufacturer: Okuma
    • Model: LS

    8-inch 3-jaw Scroll chuck Spindle through-hole diameter 52 Spindle speed 35-1800 rpm Center-to-center 800 Swing on bed 540 Reciprocation If there is any discrepancy between the contents and the actual product, th...

    Tatebayashi, Japan
  • 2015 Okuma GI-20NII

    2015 Okuma GI-20NII

    • Manufacturer: Okuma
    • Model: GI20

    OSP-U20G 9-inch 3-jaw chuck Grinding hole diameter 5-200φ Maximum length 200 Swing on table 500 If there is a discrepancy between the contents and the actual product, the actual product will take precedence.

    Tatebayashi, Japan
  • no-image_en.png

    Okuma Multus B750 CNC Lathe

    • Manufacturer: Okuma
    • Model: Multus B750

    Good condition Okuma Multus B750 CNC Lathes available between 2010 and 2016 years. Located in USA and other countries. Click request price for more information.

    USA
12345