Used Extruders in New Jersey, USA

Trusted Seller
Extruder 70 mm (2.8 in) Stainless Steel 316 - IPP# 705279
- used
- Manufacturer: Weber and Seelander
Laboratory Simplex Production rate: 70 Kg/hour maximum (soap). Speed 4.3-25.8 rpm screws rotate in opposite directions, (side by side), double jacket for cooling. (1) electric heater. Extruder driven by 1.1 KW, 3...
Princeton Junction, NJ
Trusted Seller
Carbon Steel Buss TCS-70-16D Kneader Extruder - IPP# 706691
- used
- Manufacturer: Buss
single screw Ko-Kneader system, proceesing length 16 L/D, carbon steel heated screw, screw oscillation stroke 10.5mm, screw root diameter 45mm, Theoretical pitch in kneading zone (2-spirals) 42mm, pitch in infeed...
Princeton Junction, NJ
Trusted Seller
2007 UMANG PHARMATECH UDRE-65(E)
- used
- Manufacturer: UMANG PHARMATECH
Used Umang Pharmatech Stainless Steel Die Roller Extruder Model: UDRE-65(E) Year: 2007 1.2mm die and ammeter, iris valve with table 6" - manually operated 5 liter 316 stainless steel hopper
Hainesport, NJ
Trusted Seller
KILLION KL-150
- used
- Manufacturer: KILLION
Used 1.5” Killion Single-Screw Extruder Model: KL-150
Hainesport, NJ
Trusted Seller
MARSHALL & WILLIAMS CO-EX SHEET EXTRUSION LINE
- used
- Manufacturer: Marshall
Used Marshall & Williams Co-Ex Sheet Extrusion Line Consisting of the Following: 2.5" Welex 36/1 L/D with air cooled vented barrel, with 9.145/1 gearbox ratio including manual screen changer, water cooled screw a...
Hainesport, NJ
Trusted Seller
BERLYN 2"
- used
- Manufacturer: BERLYN
Used 2” Berlyn Single-Screw Extruder Manufacturer: Berlyn Belt driven by a 40 hp DC motor, 460 volt, with Allen Bradley Model 1395 SCR through a Koellmann gearbox Gearbox: size PEZS 312, 19.95:1 reduction ratio, ...
Hainesport, NJ
Trusted Seller
EXTRUDER SCREW 4.5"
- used
- Manufacturer: EXTRUDER SCREW
Used 4.5" 38: 1 L/D 2-stage extrusion screw.
Hainesport, NJ
Trusted Seller
1995 HPM TMIII
- used
- Manufacturer: HPM
- Model: TMIII
Used 4.5” HPM Single Screw Extruder 30/1 L/D Model: TMIII Year: 1995 6" x 6" top center feed throat Driven by a 250 hp DC motor, 460 volt AC input and a Powertec motor control with 460 volt 50/60 Hz AC input. Gea...
Hainesport, NJ
Trusted Seller
Royle 3.5"
- used
- Manufacturer: Royle
Used 3.5” Royale Plastic Single-Screw Extruder Right angle reducer to a 60 hp Louis Allis type CLC Eddie Current clutch
Hainesport, NJ
Trusted Seller
1982 Wayne 1.25"
- used
- Manufacturer: Wayne
Used 1.25” Wayne Single-Screw Extruder Year: 1982 Driven by a 7.5 hp DC motor with SCR control,230 volt
Hainesport, NJ
Trusted Seller
WENGER X-155
- used
- Manufacturer: Wenger
Used Wenger model X-155 extruder. (1) screw feeder with steam injection; (1) screw feeder with motor, no drive; (1) single-shaft pre-conditioner, cut-off knife. No control panel.
Hainesport, NJ
Trusted Seller
1999 BUSS MDS200-4
- used
- Manufacturer: Buss
- Model: MDS200-4
Used 8” Buss Hot Melt Single-Screw Extruder and Pelletizing System Model: MDS200-4 Year: 1999 Screw is water heated/cooled Direct driven by a 100 hp DC motor, volt, rpm
Hainesport, NJ
Trusted Seller
1986 Gloucester 60mm
- used
- Manufacturer: Gloucester
Used 2.36” (60mm) Gloucester 32/1 L/D vented single screw Extruder. Year 1986. Driven by a 50 hp DC motor and SCR control. Gearbox 9.48:1 ratio, serial 140. Barrel has 45” centerline height. Includes temperature ...
Hainesport, NJ
Trusted Seller
CREUSOT LOIRE BC-45
- used
- Manufacturer: Loire
Used Creusot Loire (Clextral) model BC-45 twin screw extruder. Machine #750, Serial #5100750. 2 zones, 55 mm diameter screws. 45mm between shaft centers. Includes central console, pneumatic knife, powder feeder, ...
Hainesport, NJ
Trusted Seller
1984 DAVIS STANDARD 150INDS-20
- used
- Manufacturer: Davis-Standard
Used 1.5” Davis Standard Vented Single-Screw Extruder Model: 150IN DS-20 Year: 1984 Driven by a nontagged motor and a Reliance model GV3000 AC drive Gearbox: 6.53:1 ratio, rated for 50 hp, 1.25 service factor, 15...
Hainesport, NJ