Used Extruders in New Jersey, USA

Trusted Seller
1997 DAVIS STANDARD 5.11"
- used
- Manufacturer: Davis-Standard
Used 130mm (5.11") 30/1 L/D Non-Vented Davis Standard Extruder. Driven by 250 hp DC motor with 42" centerline air cooled barrel. Includes heat panel (without temperature controller), SCR controller and 6" continu...
Hainesport, NJ
Trusted Seller
2000 DAVIS STANDARD 5.11"
- used
- Manufacturer: Davis-Standard
Used 130mm (5.11") 30/1 L/D Non-Vented Davis Standard Extruder. Driven by 250 hp DC motor with 42" centerline air cooled barrel. Includes heat panel (without temperature controller), SCR controller and 6" continu...
Hainesport, NJ
Trusted Seller
1991 DAVIS STANDARD 4.5"
- used
- Manufacturer: Davis-Standard
Used 4.5" Davis Standard 30/1 L/D Extruder, Electrically Heated Air Cooled Barrel. Includes gearbox with 17.36/1 gear ratio rated at 321 hp. Serial #M-3315, SO #05432. New 10/1991. Includes Kryenborg Type K-SWE-1...
Hainesport, NJ
Trusted Seller
DAVIS STANDARD 1.5"
- used
- Manufacturer: Davis-Standard
- Model: 15
Used 1.5" Davis Standard 28/1 L/D Non-Vented Air Cooled Extruder. New in 1989. Equipped with 6.53/1 gearbox ratio. Gearbox is belt driven through a 15 hp DC motor. Includes temperature control panel with motor dr...
Hainesport, NJ
Trusted Seller
1982 Wayne 1.25"
- used
- Manufacturer: Wayne
Used 1.25” Wayne Single-Screw Extruder Year: 1982 Driven by a 7.5 hp DC motor with SCR control,230 volt
Hainesport, NJ
Trusted Seller
RANDCASTLE Ø19 мм, L/D 24:1
- used
- Manufacturer: RANDCASTLE
Used Randcastle Laboratory Sheet Extrusion Line Consiting of the Following Items: - .75" Randcastle 24/1 L/D extruder with temperature control panel, model RCP0750, serial #J2271. - 2" O.D. x 8" wide chill roll s...
Hainesport, NJ
Trusted Seller
DAVIS STANDARD 4.5"
- used
- Manufacturer: Davis-Standard
Used 4.5" Davis Standard 30/1 L/D Extruder, Electrically Heated Air Cooled Barrel. Includes gearbox with 17.36/1 gear ratio rated at 321 hp. Serial #M3316, SO #05432. New 10/1991. Includes Kryenborg Type K-SWE-12...
Hainesport, NJ
Trusted Seller
PRODEX 4.5"
- used
- Manufacturer: PRODEX
Used 4.5" pelletizing line consisting of the following: - 4.5" Prodex 34/1 L/D vented extruder including strand die, Lufkin "Change Gear" gearbox with 15.03/1 reduction, and an hydraulic screen changer with pump....
Hainesport, NJ
Trusted Seller
4.5" Hydraulic Screen Changer With Pump
- used
Used 4.5" Hydraulic Screen Changer hydraulic pump and stand. Missing breaker plates. Includes approx. 11" wide strand die without die plate. Last used on 4.5" Prodex extruder.
Hainesport, NJ
Trusted Seller
Motan 100
- used
- Manufacturer: Motan
Used 300 lb. Motan model 100 desiccant dryer. No hopper included. Serial #9003860. 6 kW total heater load, 80-100 psi air, 2.3 HP. 240 volt AC input.
Hainesport, NJ
Trusted Seller
1997 PIOVAN T6000ix
- used
- Manufacturer: Piovan
Used 6000 lb Piovan stainless steel drying hopper. New 1997. Hopper model T6000ix. Hoppers are approximately 60" o.d. X 14' tall.
Hainesport, NJ
Trusted Seller
CINCINATTI MILACRON 34" Wide
- used
- Manufacturer: Cincinnati
Used 34" wide Cincinatti Milacron 2-roll sheet take-off with 34" face X 18" diameter rolls. Rolls are mounted in a vertical stack arrangement. Chromed and cored rolls with rotary unions, silent chain driven with ...
Hainesport, NJ
Trusted Seller
THORESON MCCOSH TD360
- used
- Manufacturer: Thoreson McCosh
Used Thoreson McCosh Model TD360 desiccant dryer including approximately 1000 lb. hopper. Rated at approximately 360 lbs. per hour. Includes 10 hp 460 volt motor, Serial #971128.
Hainesport, NJ
Trusted Seller
THORESON MCCOSH TD-24
- used
- Manufacturer: Thoreson McCosh
Used Thoreson McCosh Model TD-24 dehumidifying hopper dryer. Serial #206-152-10. Caster mounted dryer includes 50 lb. capacity insulated hopper mounted on stand. 24 CFM. 480 volt, 3 phase, 60 cycle operation at 9...
Hainesport, NJ
Trusted Seller
NOVATEC CDM-750
- used
- Manufacturer: Novatec
- Model: CDM-750
Used Novatec Desiccant Dryer. Model CDM-750, serial number #12-095, new 1994. Has touch screen micro processor control model MCD-1002. Includes (2) approximatey 1000 lb hoppers with receivers and process heaters....
Hainesport, NJ