Used Extruders

GLOUCESTER 3.5″ 32:1 L/D EXTRUDER 18365
- used
One (1) Used Gloucester model 35250R2 3.5″ 32:1 extruder having an electrically heated, air cooled, vented, and plugged barrel at approximately a 65″ center line height. S/N 36736/12. Barrel is set up for Contra-...
Elk Grove Village, IL
HPM 3.5″ 30:1 L/D EXTRUDER 17578
- used
One (1) used 3.5″30:1 HPM extruder having an electrically heated water cooled (closed loop) vented and plugged barrel at a 51 ½” centerline height. Koellmann gearbox is driven by a 100 HP D/C motor with a Eurothe...
Elk Grove Village, IL
Trusted Seller
Used Processing Technologies International LLC Model G5000 Trident Series Single Screw extruder
- used
- Manufacturer: International
Used Processing Technologies International LLC Model G5000 L/D ratio 32:1 Trident Series Single Screw extruder. S/N 16709-4484. Gear Drive Info: PTI Model ZPE2-300- B B7, S/N 15253, Ratio 12.66:1, Driver:1800, Dr...
Salisbury, NC
Trusted Seller
1999 Davis Standard TANDEM
- used
- Manufacturer: Davis-Standard
Davis-Standard Tandem Film Extrusion Coating Line Davis-Standard Tandem Film, w/ (2) 600 HP Extruders, Rotogravure Liquid Coating, Unwinder, Rewrinder, Corona Treatment, Honeywell Measurex 2080 Precision Plus Gau...
Franklin Park, IL
PRODEX 4.5″ 32:1 L/D EXTRUDER 18180
- used
One (1) used Prodex 4.5″ 32:1 L/D extruder having an electrically heated, water cooled (closed loop), and side vented barrel. The gearbox is a Lufkin change gear type gearbox and is direct driven in a tuck under ...
Elk Grove Village, IL
PTI 36:1 L/D 6″ EXTRUDER 18750
- used
One (1) PTI model 6000 6″ 36:1 L/D extruder having an eight (8) zone electrically heated water cooled (closed loop) and vented barrel at a 64″ center-line height. Gearbox is a Flender model SZNF390 with a 15.4:1 ...
Elk Grove Village, IL
WAYNE 1.250″ 30:1 L/D EXTRUDER 16355
- used
- Manufacturer: Wayne
Wayne 1.25″ extruder, S/N 9414-832. 30:1 L/D electrically heated, air cooled, vented (venting is plugged), barrel driven by a 7.5HP DC motor with SCR control 230-Volts input power. Includes track wheel base and a...
Elk Grove Village, IL
GLOUCESTER 2.5″ 32:1 L/D EXTRUDER 18366
- used
One (1) Used Gloucester model 25225R2 2.5″ 32:1 extruder having an electrically heated, air cooled, and non-vented barrel at approximately a 65″ center line height. S/N 36736/25. Barrel is set up for Contra-Cool ...
Elk Grove Village, IL
KILLION 1″ 24:1 L/D EXTRUDER 16305
- used
24:1 Killion pedestal extruder. S/N N6598 with a three (3) zone electrically heated air cooled barrel. Gearbox has a reduction ratio of 30:1 and is direct driven by a 3HP 1750/2050 RPM DC motor. Barrel can be rai...
Elk Grove Village, IL
WELEX 2″ 24:1 L/D EXTRUDER 17438
- used
- Manufacturer: Welex
Welex model 200-24/1, 2″ 24:1 L/D extruder with a three (3) zone electrically heated, air cooled non-vented barrel at approximately a 50″ centerline height. Gearbox is a Koellmann Gear and is belt driven by a 20 ...
Elk Grove Village, IL
GLOUCESTER 2.5″ 32:1 L/D EXTRUDER 17690
- used
Gloucester 2.5″ extruder, 32:1 L/D five (5) zone air cooled and vented barrel at a 45″ centerline height. Top center feed throat. Driven by a 50 HP A/C 1750/2100 RPM motor, includes 6 zone temperature control pan...
Elk Grove Village, IL
Trusted Seller
Extruder 38.1 mm (1.5 in) Aluminum - IPP# 78337
- used
- Manufacturer: Sterling
Sterling Having 3-zone electrically heated water cooled non-vented Xaloy 306 lined barrel. Barrel water cooling system utilizes cast aluminum heaters in a closed loop system including reservoir pump and heat exch...
Princeton Junction, NJ
Barwell C3 Preformer
- used
- Manufacturer: Barwell
One (1) Used Barwell C3 Preformer, Barwell_Rubber_Preformer, capacity 120 lbs, 10" x 55" chamber, Motor 460V, 60 Cycle, Max PSI 2500.
Cleveland, OH
WELEX 2″ 24:1 L/D CO-EXTRUDER 17576
- used
- Manufacturer: Welex
One (1) used 2″ 24:1 L/D Welex co-extruder. Water cooled. Missing motor, drive panel, and pedestal. Last used on a sheet line.
Elk Grove Village, IL
ACTUAL AE-25/10/22 25MM PEDESTAL EXTRUDER 18705
- used
One (1) used Actual model AE-25/10/22 25mm pedestal extruder. Having a 24:1 L/D ratio. Unit has a three (3) zone electrically heated, air cooled, non-vented barrel. Barrel can be raised or lowered and also tilts ...
Elk Grove Village, IL