Used Extruders

Coperion Werner Pfleiderer ZSK 92 - 83 Twin Screw Extruder Gearboxes

• used

• Manufacturer: Coperion Waeschle

Coperion Werner Pfleiderer ZSK 92 Twin Screw Extruder Gear Reducers ( ZSK 83 Screws & Barrels ) Feed Section plus 5 Barrel Sections - 3 Cooling – 2 Non Cooling Model : 1243164 Project 13-6214 Mfg 2014 Siemens...

3.5″ Welex 30:1 Extruder

• used

• Manufacturer: Welex

3.5″ WELEX EXTRUDER SINGLE SCREW Specifications: Screw Diameter 3.5″ L/D Ratio 30:1 Barrel Zones 5 HP Capacity 430 HP Type of Cooling Water Cooled Electrics 480V Pump 2 HP Recirculation Pump with Heat Exchanger G...

KMD 125 mm Extruder

• used

Buss Model MKS 30 Laboratory Ko-Kneader Extruder

• used

• Manufacturer: Buss

51849001 Used Buss Model MKS 30 Laboratory Ko-Kneader Extruder, Serial# 97-1030 (1997). 30mm Diameter x approximate 17" long single screw. Throughput rates up to 30kg per hour. 3 Zone barrel electrically heated, ...

1.5″ Killion LAB Extruder – PRISTINE !!!!!!!

• used

1998 Milacron Apex 6.0 Extruder

• used

• Manufacturer: Milacron

65" X 24" Cinn/HPM w/6" Ext. 65" X 24" No wind or shear 1998 Used 65" wide Cincinnati Milacron/ HPM 1998 sheet extrusion line last used on PET at Approx 1500-1800 Lbs/Hr. Includes the following:6" HPM extruder 30...

4.5″ Davis Standard Extruder MV45IN45 1997

• used

• Manufacturer: Davis-Standard

4.5″ Davis Std. Extruder MV45IN45 – New 1998 Water Cooled 24:1 N-Vented

AET 10/6″ Dual Diamter Extruder

• used

AET dual diameter 10″-6″ – 32:1 L/D 50” centerline height film reclaim extruder with Koellmann gear double reduction gear reducer, with oil pump, heat exchanger cooling system, cast water cooled feed throat with...

3.4″ Davis Std. Extruder (Recently Rebuilt)

• used

• Manufacturer: Davis-Standard

3.4″ Davis Std. Extruder (Recently Rebuilt) 50 HP AC Motor with AC Drive – rated up to 100 HP 24:1 L/D Ratio – Non-Vented Eurotherm Controllers Screw in Good Condition NOTE: Rebuilt and painted 2 years ago, never...

2.5″ Crown 36:1 Extruder – 2015

• used

• Manufacturer: Crown

2.5″ Crown 36:1 L/D Extruder – 2015 Expected Rate: 10-200 Kgs/hr. Extruder Specification: 2.5” Dia., 36:1 L/D Ratio Barrel Centerline: 40″ Horsepower: 75HP Drive: AC Screw RPM: 140 Max PSI: 10,000 # of Barrel Zon...

Dr. Collin ZK25×24/42D Twin-Screw Extruder for Sale

• used

• Manufacturer: Dr. CollinDr. Collin

54037001 Used Dr. Collin ZK25x24/42D Twin Screw Extruder. 25mm Diameter screws. 42:1 L/D. Maximum screw speed 521 RPM via a gearbox by a 30kW motor. 7 housing sections. Electrically heated, water cooled. Approxim...