Used Extruders

Imperia & Monferrina P6 Automatic Fresh Pasta Extruder – 12 kg/hour Production

• used

• Manufacturer: Imperia & Monferrina

53859001 Used Imperia & Monferrina Automatic Fresh Pasta Extruder, Model P6. 12 kg/hour pasta production; 6 kg capacity kneading vat; 89 mm die diameter; Automatic cutter with speed controls. Includes Multipasta ...

3.5″ Davis Std. 30:1 Air Cooled Extruder

• used

• Manufacturer: Davis-Standard

3 1/2” Davis Standard 30:1 150 H.P. A.C. Air Cooled 350 to 400 # per HR. Material Poly No Clamp Bolt on Front End 17:1 Gear Ratio 100 RPM 5 Barrel Zones 4 Die Zones

6″ Davis Standard 30:1 Extruder

• used

• Manufacturer: Davis-Standard

3.5″ Davis Std. Rubber Extruder – New 2006

• used

• Manufacturer: Davis-Standard

3.5″ Davis Std. Rubber Extruder – New 2006 Model 35IN35DSRE 20:1 L/D Ratio Gearbox Ratio: 17.39.1 257 HP DIMENSIONS: 66″W x 120′ L x 78″ High Dyn. Thrust Cap. 408,300 lb. Dyn Thrust Cap. 185,204 KG Liters: 6 WE...

Werner & Pfleiderer UK2000AEL Sigma Mixer/Extruder – 316 SS, 793 Gallon Capacity

• used

• Manufacturer: WP

10131017 Used Werner & Pfleiderer Mixer/Extruder, Type UK2000AEL. 316 Stainless steel construction. Total capacity 793 gallon (3000 liter); working capacity 530 gallon (2000 liter). Bowl 56.6" x 65.5" x 54.6" dee...

Insta-Pro Model 2000 RC Continuous Extruder – 125 HP Motor, High-Capacity Processing

• used

• Manufacturer: Insta-ProInsta-Pro

53147054 Used Insta-Pro Model 2000 RC Continuous Extruder. Rated capacity approximate 1,300 - 3,840 pounds per hour. Includes extruder barrel and main worm shaft assembly. Driven by 125 HP motor. ...

American Kuhne AK120mm 30:1 Single Screw Extruder 2013

• used

• Manufacturer: Kuhne

American Kuhne AK120mm 30:1 Single Screw Extruder 2013 Screw Size: 120 mm 30:1 L/D Ratio 200 HP motor Digital Controls 42″ Centerline Height Electrically heated – Air Cooled Barrel 480v

Gloucester Model 35250R2 3.5" Diameter Single Screw Extruder – Industrial Used

• used

• Manufacturer: GloucesterGloucester

10755151 Used Gloucester Model 35250R2 3.5" Diameter Single Screw Extruder. 3.5" diameter screw, 32:1 L/D. Has an electrically heated, air cooled, vented, and plugged barrel at approximately a 65? center line hei...

6″Merrit Davis 36:1 Extruder w/Side Stuffer

• used

Merritt Davis 6″ Extruder. 36:1 L/D. Vented barrel with 18″ air operated side stuffer. Air-cooled. 600HP DC motor with Control Techniques drive. Control cabinet with Allen Bradley SLC 5/03 PLC and Cutler Hammer P...

6″ NRM PM III -30:1 VENTED – AIR COOLED EXTRUDER

• used

• Manufacturer: NRM

6″ NRM PM III -30:1 VENTED – AIR COOLED EXTRUDER REBUILT – approximately 43″ centerline height, gearbox having new bearings and seals with cooling system – new heat exhanger and pump, 30:1 L/D 8 zone barrel, cast...

Gloucester 3.5" Single Screw Extruder – Model 35250R2, 32:1 L/D, 100 HP Motor

• used

• Manufacturer: GloucesterGloucester

10755150 Used Gloucester 3.5" Single Screw Extruder, Model 35250R2. 3.5" diameter screw, 32:1 L/D. Having an electrically heated, air cooled, and non-vented barrel at approximately a 65" center line height. Barre...

1998 Milacron Apex 6.0 Extruder

• used

• Manufacturer: Milacron

65" X 24" Cinn/HPM w/6" Ext. 65" X 24" No wind or shear 1998 Used 65" wide Cincinnati Milacron/ HPM 1998 sheet extrusion line last used on PET at Approx 1500-1800 Lbs/Hr. Includes the following: 6" HPM extruder 3...

Gloucester 25225R2 Single Screw Extruder – 2.5" Dia., 32:1 L/D, 60 HP Motor

• used

• Manufacturer: GloucesterGloucester

10755152 Used Gloucester Single Screw Extruder, Model 25225R2. 2.5' Diameter Screw, 32:1 L/D. Has an electrically heated, air cooled, and non-vented barrel at approximately a 65? center line height. Barrel is se...