Used Extruders

Coperian ZSK-18 ML Twin Scrw Extruders New 2008 (3 available)
- used
Coperian ZSK-18 ML Twin Scrw Extruders New 2008 (3 available) Screw Diameter: 18 mm/twin screw 15 HP Centerline – 1100mm/43.3″ Water Cooled 460 volt
Rockville Centre, NY
Trusted Seller
BUSS 200 HP
- used
- Manufacturer: Buss
Used 100mm Buss kneader with 9/1 L/D barrel. Driven by 200 hp DC motor, includes 5.94/1 gearbox, jacketed barrel and clam shell barrel opening. Includes operator control panel. Kneader will discharge into approxi...
Hainesport, NJ
3.5″ Davis Standard 24:1-Air Cooled -N-Vented Extruders (3) 1998
- used
- Manufacturer: Davis-Standard
3.5″ Davis Standard Extruders Model #MV35IN35 – New 1998 (Three Available) Air Cooled 24:1 L/D Non-Vented HP 158 Gear Ratio: 17.39 SF 1.25
Rockville Centre, NY
Trusted Seller
Conair D400H
- used
- Manufacturer: Conair
- Model: D400H
Used Conair model D400H high heat desiccant dryer, 300 cfm. Have carousel desiccant cartridges, operator controls, no hopper. Previously used with 900-1000 lb hopper.
Hainesport, NJ
Trusted Seller
1997 Piovan T1000IX
- used
- Manufacturer: Piovan
Used 1000 liter Piovan stainless steel drying hopper. New 1997. Hopper model T1000IX. Hoppers are approximately 36" diameter X 8' tall.
Hainesport, NJ
Trusted Seller
THORESON MCCOSH TD2000
- used
- Manufacturer: Thoreson McCosh
Used 6,000 lb. Thoreson McCosh Desiccant Dryer Model TD2000. Serial #201-703-05. 480 volt, AC input, 20 hp. Amps 236.0, kw 182.0. No hopper included.
Hainesport, NJ
Trusted Seller
UNA-DYN GS150
- used
- Manufacturer: Una-Dyn
Used Una Dyn Piovan Desiccant Dryer. Model GS150, serial #237240-01-01-0903. Rated at 150 cfm. Includes approximately 800 LB., 30" diameter x 72" straight side x 19" cone bottom insulated hopper with top mounted ...
Hainesport, NJ
Trusted Seller
2003 WERNER & PFLEIDERER ZSK20
- used
- Manufacturer: WP
- Model: ZSK20
Used 20mm Werner & Pfleiderer model ZSK20 co-rotating twin screw extruder. Has 40/1 L/D barrel at 43" centerline height driven through a 3:1 gearbox with a 37-Newton meter torque capacity per screw shaft. Extrude...
Hainesport, NJ
Shangha Target 11" Rolling & Scoring Line with Extruder – Chiclet Production
- used
52189024 Used Shangha Target 11" Rolling & Scoring Line with Extruder. Designed to make chiclets. Consisting of: Twin Screw extruder with 5" diameter screws, electrically heated, die for 11.5" sheet, Dusting conv...
Belvidere, IL
Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled
- used
- Manufacturer: Davis-Standard
10755162 Used Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled and non-vented barrel at nominal 44" center-line. 15.08:1 Gearbox reduction ratio; Rated at 1...
Belvidere, IL
Trusted Seller
BRABENDER 88
- used
- Manufacturer: Brabender
Used 25mm 24/1 L/D Brabender twin screw extruder package. Has air cooled extruder, temperature control panel, type D10002, prep center with model 088 type 09-25-000 temperature pressure module. Includes 10 HP DC ...
Hainesport, NJ
Trusted Seller
2008 COPERION ZSK-40-MEGA
- used
- Manufacturer: Coperion Waeschle
Used 40mm Coperion Mega 40 co-rotating twin screw extruder. New 2008. No barrels or screws included. Driven by 200 hp AC motor, 1790 rpm, with Powerflight VFD controller. Has 1.155 gear ratio supplying 1200 rpm s...
Hainesport, NJ
Trusted Seller
2014 STEER ENGINEERING OMICRON 12P
- used
- Manufacturer: STEER ENGINEERING
Used 12mm 45/1 L/D Steer Engineering pharmaceutical grade stainless steel co-rotating twin screw extruder. Model Omicron 12P, serial #EA00427, new 2014. Driven by a 2 HP, 480 volt/3/60 motor. Includes control pan...
Hainesport, NJ
Trusted Seller
CO-EX BLOCK 6-Layer
- used
- Manufacturer: CO-EX BLOCK
Used extrusion co-ex Block last used in a laboratory environment with approximately 1.25" diameter extruders and a 12" sheet die. Includes six (6) inserts of varying percentages. Five (5) are in a box and one (1)...
Hainesport, NJ
Trusted Seller
2000 CLOEREN 2.5", 3.5" and 5.25"
- used
- Manufacturer: CLOEREN
Used Cloeren 3-layer co-ex block designed for asymmetric layer configurations (A/B/C at 12/64/24%). For 2.5", 3.5" and 5.25" extruders. Manufactured 2000 Never used. Feed block is a variable geometry vein type.
Hainesport, NJ