Used Extruders

Cincinnati Extruders (TC 86mm) CM 80 – CM 111(Several of each)
- used
- Manufacturer: Cincinnati
Rockville Centre, NY
Trusted Seller
Wayne 1.25"
- used
- Manufacturer: Wayne
Used 1.25” Wayne Single-Screw Extruder Driven by a 7.5 hp DC motor with SCR control,230 volt
Hainesport, NJ
APV Baker Perkins MP50/25D Twin Screw Extruder – 330 LBS/HR Capacity
- used
- Manufacturer: Baker Perkins
51164005 Used APV Baker Perkins Twin Screw Extruder, type MP50/25D. 50 mm dia. twin screws. 25:1 L/D. Co-rotating. Electrically heated, water cooled. Max Screw speed 500 RPM via a gearbox by a 55.2 KW (74hp)-3/50...
Belvidere, IL
6″ Davis Standard 30:1 – 300 HP AC – Model 600S Thermatic Extruder
- used
- Manufacturer: Davis-Standard
- Model: Thermatic
6″ Davis Standard 30:1 – 300 HP AC – Model 600S Thermatic Extruder 6″ Davis Standard Model 600S Thermatic Extruder 8″ x 8″ water cooled square feed throat, all new gearbox bearings (less thrust) 17.21 gearbox rat...
Rockville Centre, NY
Trusted Seller
DAVIS STANDARD 1.5"
- used
- Manufacturer: Davis-Standard
- Model: 15
Used 1.5" Davis Standard 28/1 L/D Non-Vented Air Cooled Extruder. New in 1989. Equipped with 6.53/1 gearbox ratio. Gearbox is belt driven through a 15 hp DC motor. Includes temperature control panel with motor dr...
Hainesport, NJ
Industrial Twin Screw Extruder – Krauss Maffei Model KMD90, Electrically Heated, Oil Cooled Barrel
- used
- Manufacturer: Krauss-Maffei
52102001 Used 90mm Krauss Maffei Model KMD90 Counter-Rotating Twin Screw Extruder. Has electrically heated oil cooled barrel. Driven by 40HP DC motor with SCR control. Includes temperature control panel.
Belvidere, IL
Trusted Seller
DAVIS STANDARD 4.5"
- used
- Manufacturer: Davis-Standard
Used 4.5" Davis Standard 30/1 L/D Extruder, Electrically Heated Air Cooled Barrel. Includes gearbox with 17.36/1 gear ratio rated at 321 hp. Serial #M3316, SO #05432. New 10/1991. Includes Kryenborg Type K-SWE-12...
Hainesport, NJ
Trusted Seller
RANDCASTLE Ø19 мм, L/D 24:1
- used
- Manufacturer: RANDCASTLE
Used Randcastle Laboratory Sheet Extrusion Line Consiting of the Following Items: - .75" Randcastle 24/1 L/D extruder with temperature control panel, model RCP0750, serial #J2271. - 2" O.D. x 8" wide chill roll s...
Hainesport, NJ
Italtech Sandore Pasta Mixer Extruder – Model MX180DH | 200 kg/hr | 195mm Die | 8.5 kW | Built 2008
- used
- Manufacturer: SandoreSandore
53530001 Used Italtech Sandore Pasta Mixer Extruder, Model MX180DH. 200 Kg/hour extrusion production; 30 kg extruder basin dough capacity; 50/kg mixer/kneader basin dough capacity; 195mm die dimension; Vacon X-Se...
Belvidere, IL
Trusted Seller
4.5" Hydraulic Screen Changer With Pump
- used
Used 4.5" Hydraulic Screen Changer hydraulic pump and stand. Missing breaker plates. Includes approx. 11" wide strand die without die plate. Last used on 4.5" Prodex extruder.
Hainesport, NJ
Trusted Seller
BERINGER 12"
- used
- Manufacturer: BERINGER
Used 12" Beringer slide plate screen changer Model 1200. Mounted on stand for 42" centerline height. Includes an upstream adapter for a 160mm twin screw extruder, a 10 hp hydraulic power pack and screen changer s...
Hainesport, NJ
6″ Davis Standard 34:1 -500 HP -Vented (2 vents) Extruders (2 available)
- used
- Manufacturer: Davis-Standard
6″ Davis Standard 34:1 -500 HP -Vented (2 vents) Extruders (2 available)
Rockville Centre, NY
Trusted Seller
1997 Piovan T1000IX
- used
- Manufacturer: Piovan
Used 1000 liter Piovan stainless steel drying hopper. New 1997. Hopper model T1000IX. Hoppers are approximately 36" diameter X 8' tall.
Hainesport, NJ
Trusted Seller
1997 PIOVAN T6000ix
- used
- Manufacturer: Piovan
Used 6000 lb Piovan stainless steel drying hopper. New 1997. Hopper model T6000ix. Hoppers are approximately 60" o.d. X 14' tall.
Hainesport, NJ
Trusted Seller
24" x 12"
- used
Used 24" Wide 3-Roll Down-Stack Cooling Roll Stack (3) 12" diameter rolls Approximately 5' cooling conveyor Rbber to metal pull roll assembly Chill rolls driven by a 5HP DC motor without drive Pull rolls are driv...
Hainesport, NJ