Used Extruders

Theyson TSK 060-44D-EXH 1500 Twin Screw Extruder | 60mm | 55 kW | 44:1 L/D | ATEX Motor
- new
- Manufacturer: TheysohnTheysohn
54072001 Unused Theyson TSK 060-44D-EXH 1500 Twin Screw Extruder | 60mm | 55 kW | 44:1 L/D | ATEX Motor. 44:1 L/D. Maximum screw speed 500 RPM via a gearbox by a 55 Kw (73.75hp)1500 RPM-380volt/50cycle/3Ph Ex-pro...
Belvidere, IL
High-Capacity Prealpina Single Screw Extruder – 1100 lbs/hr Production Rate
- used
- Manufacturer: Prealpina
53309001 Used Prealpina 130 mm Diameter Single Screw Extruder, with a capacity of 1100 LBS/500 Kgs./hr. Electrically heated, air cooled. incl. die head and control panel. Reported to have new screw and barrel. Pr...
Belvidere, IL
Trusted Seller
Auction
Century Extrusion Twin Screw Side Feeder With 5hp Motor
- used
Century Extrusion Twin Screw Side Feeder With 5hp Motor
Evansville, IN
Visit Auction Website
Trusted Seller
Auction
Explosion Isolation Valve.
- used
Explosion Isolation Valve.
Evansville, IN
Visit Auction Website
Trusted Seller
Auction
ATEX Explosion Isolation Valve.
- used
ATEX Explosion Isolation Valve.
Evansville, IN
Visit Auction Website
Trusted Seller
Auction
ATEX Explosion Isolation Valve.
- used
ATEX Explosion Isolation Valve.
Evansville, IN
Visit Auction Website
Trusted Seller
Auction
Explosion Isolation Valve.
- used
Explosion Isolation Valve.
Evansville, IN
Visit Auction Website
PET Sheet Extrusion Line – 48” Wide, 2,000 lbs/hr, OMV D140 Extruder, (
- used
54129001 Used PET Sheet Extrusion Line 48" Wide, 2,000 lbs/hr, OMV D140 Extruder (Used) 350 HP main motor; 30 HP drive system; Rated up to 2,000 lbs/hour (dependent on material and configuration); Multi-zone coo...
Belvidere, IL
Xinda PSHJ-35 Twin Screw Extruder – 35.6mm, 42:1 L/D, 600 RPM, Clam Shell Barrel, 15kW, With Conveyor & Cutter – 2021
- used
54023001 Used Xinda Twin Screw Extruder, Model PSHJ-35. 35.6mm screw diameter; 42:1 L/D ratio; 600 RPM screw speed; 30-100 kg/hour output; Clam shell barrel. 15 kW motor, 3/60/480V. Built 2021. With cooling conve...
Belvidere, IL
Trusted Seller
Extrusion Dies for Plastic Extruder Tooling One Price for Lot
- used
Palm Tree # LR-000000-01262021-BS-02 Picture# 01252021 Bid with Confidence on this item, check our feedback!!! * All information deemed accurate but may vary from model to model. Contact Larry for any questio...
$1,995 USD
Providence, RI
Leistritz MIC 27-GL-36D Twin Screw Extruder – 27mm, 36:1 L/D, 15.75 HP, Co-/Counter-Rotating, Built 2006
- used
- Manufacturer: Leistritz
10755170 Used Leistritz Twin Screw Extruder, Type MIC 27-GL-36D. (2) 1.05" (27 mm) diameter screws. 36:1 L/D Ratio. Co-rotating. 8-barrel housing section electrically heated, water cooled. (1) Degassing port. Max...
Belvidere, IL
Trusted Seller
Polar Process / Advanced Stain Feeder Auger PP352HU3
- refurbished
- Manufacturer: Polar
Polar Process / Advanced Stainless, Model PP352HU3, stainless steel, twin screw extruder and feeder, with pounds of product per hour – depending on materials and application. Hopper dimensions: 12½" in Length; 7½...
Carol Stream, IL
Trusted Seller
EDI/Nordson H-40 Extrusion Dies
- used
- Manufacturer: EDI
- Model: H-40
Model HD-40 Sheet Die Having a 60″ Slot Opening. Integral Upper Flexible Lip and Fixed Lower Lip. Adjusting Bolts on 1″ Centers. 0.040″ Flex Adjustment. Coat-Hanger Manifold. 2 ½” Square Back Center Feed. Last R...
$8,500 USD
Get financing
Est. $167/mo
Chicago, IL
Trusted Seller
2002 Nordson H-40 Extrusion Dies
- used
- Manufacturer: Nordson
Unused Refurbished Extrusion Dies / Nordson Model H-40 Sheet Die .58″ Slot Opening. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex adjustment. Coat-hanger manifold. W...
$14,500 USD
Get financing
Est. $285/mo
Chicago, IL
DAVIS STANDARD 3.5″ 30:1 75 18867
- used
- Manufacturer: Davis-Standard
One (1) used Davis Standard model 35IN35 extruder. S/N M3922. Shop order 05580. Extruder has 30:1 L/D ratio with a six (6) zone electrically heated, air cooled, and vented barrel at a 42″ center-line. Gearbox has...
Elk Grove Village, IL