- Trusted Seller
Polar Process / Advanced Stain Feeder Auger PP352HU3
refurbished
- Manufacturer: Polar
Polar Process / Advanced Stainless, Model PP352HU3, stainless steel, twin screw extruder and feeder, with pounds of product per hour – depending on materials and application. Hopper dimensions: 12½" in Length; 7½...
Carol Stream, IL - Trusted Seller
EDI/Nordson H-40 Extrusion Dies
used
- Manufacturer: EDI
- Model: H-40
Model HD-40 Sheet Die Having a 60″ Slot Opening. Integral Upper Flexible Lip and Fixed Lower Lip. Adjusting Bolts on 1″ Centers. 0.040″ Flex Adjustment. Coat-Hanger Manifold. 2 ½” Square Back Center Feed. Last R...
- Trusted Seller
2002 Nordson H-40 Extrusion Dies
used
- Manufacturer: Nordson
Unused Refurbished Extrusion Dies / Nordson Model H-40 Sheet Die .58″ Slot Opening. Integral upper flexible lip and fixed lower lip. Adjusting bolts on 1″ centers. 0.040″ flex adjustment. Coat-hanger manifold. W...
DAVIS STANDARD 4.5″ SINGLE STAGE 12018
used
- Manufacturer: Davis-Standard
Davis Standard 4.5″ single stage extruder screw. Approximately 28:1 L/D with four rows of mixing pins.
Elk Grove Village, IL
DAVIS STANDARD 3.5″ 30:1 75 18867
used
- Manufacturer: Davis-Standard
One (1) used Davis Standard model 35IN35 extruder. S/N M3922. Shop order 05580. Extruder has 30:1 L/D ratio with a six (6) zone electrically heated, air cooled, and vented barrel at a 42″ center-line. Gearbox has...
Elk Grove Village, IL
DAVIS STANDARD 4.5″ SINGLE STAGE 12022
used
- Manufacturer: Davis-Standard
Davis Standard 4.5″ single stage extruder screw. Approximately 30:1 L/D with three rows of mixing pins near the screw end.
Elk Grove Village, IL
DAVIS STANDARD 2.5″ BARREL WITH 2023
used
- Manufacturer: Davis-Standard
Davis Standard 2.5″ extruder barrel. 24:1 L/D with Xalloy 800 liner. Barrel measures approximately 10-14 millimeters of wear.
Elk Grove Village, IL
DAVIS STANDARD 8″ 900 HP 18828
used
- Manufacturer: Davis-Standard
Used Davis Standard Model 80IN80HT 8″ 32:1 L/D extruder having a seven (7) zone electrically, heated, water cooled (closed loop), and vented barrel at a 44″ center-line. S/N AA454. Shop Order 72635. Gearbox has a...
Elk Grove Village, IL
NEW / UN WELEX 4.5 12346
used
- Manufacturer: Welex
New chrome plated Welex 4.5″ extruder screw, S/N 18079. 36:1 L/D, 8″ long x 1″ wide, keyway 190.5″ overall length.
Elk Grove Village, IL
DAVIS STANDARD 3.5″ SINGLE STAGE 12028
used
- Manufacturer: Davis-Standard
Davis Standard 3.5″ chrome plated single stage extruder screw. Approximately 24:1 L/D. Four rows of mixing pins.
Elk Grove Village, IL
DAVIS STANDARD 4.5″ 30:1 L/D 18589
used
- Manufacturer: Davis-Standard
One (1) used Davis Standard model 45IN45CT extruder. S/N P5568. Shop order 53447. Extruder has 30:1 L/D ratio with a six (6) zone electrically, heated air cooled, and non-vented barrel at a 42″ centerline. Water ...
Elk Grove Village, IL
TWO STAGE 4.5″ CHROME PLATED 12019
used
4.5″ chrome plated two stage extruder screw with mixing pins at the end of first stage. Approximately 28:1 L/D single key shaft. Unknown manufacturer.
Elk Grove Village, IL
STEER ENGINEERING 12mm TWIN SCREW 16620
used
Steer Engineering Pharmaceutical twin-screw extruder, S/N EA00427. Model Omicron 12P new in 2014. Screw diameter is 12mm diameter ratio (do/di) is 1.45 flight depth is 1.9 max screw speed is 900 RPM 2HP drive, 48...
Elk Grove Village, IL
UNK MFG 5″ SINGLE SCREW 12404
used
Unk Mfg. 5″ single screw extruder barrel, non-vented, 24:1 L/D, 8 bolt flange mount to gearbox. Threaded front of barrel to accept screen changer. Overall length is 134.5″ with 4.25″ end extension.
Elk Grove Village, IL
WELEX 3.5″ 30:1 L/D 150 17954
used
- Manufacturer: Welex
One (1) used Welex 3.5″ 30:1 L/D extruder. Electrically heated water cooled (closed loop) and vented barrel at an approximate 69″ center line height. Center line height can be reduced approximately 8″ by removing...
Elk Grove Village, IL
Tip: Enter manufacturer, model or keyword