Used Extruders

DAVIS STANDARD 1/4″ TUBING EXTRUSION 17437

• used

• Manufacturer: Davis-Standard

Davis Standard 1/4″ tubing extrusion line including the following equipment:A. Davis Standard / Killion model KN-100 1.00″ 24:1 L/D extruder having a three (3) zone electrically heated, air cooled non-vented barr...

DAVIS STANDARD 3.5″ DOUBLE SPIRAL 12398

• used

• Manufacturer: Davis-Standard

Davis Standard 3.5″ double spiral screw 32:1 L/D, 136″ overall length 12″ shank.Three are available.

GLOUCESTER 2522 2.5″ 32:1 L/D 17805

• used

One (1) Used Gloucester model 2522 R2 2.5″ 32:1 L/D extruder with an electrically heated, water cooled (closed loop) vented and plugged barrel at approximately a 72″ center line height. Gearbox has a reduction ra...

JOHNSON 1.5″ 8786

• used

• Manufacturer: Johnson

Johnson 1-1/2″ extruder 24:1 L/D, non-vented barrel mounted on base for co-extrusion. 10HP DC motor with no controls. 11.32:1 gear box rating at 41HP with a 1.25 service factor. No barrel cooling. S/N 7621-15

JOHNSON 1.5 8891

• used

• Manufacturer: Johnson

Johnson 1-1/2″ extruder, 24:1 L/D. Non-vented barrel mounted on a base for co-extrusion. 10HP DC motor with no controls. S/N 7619-15. 11.32:1 gear box, 41 HP with a 1.25 service factor. No barrel cooling.

BRABENDER IT7150 3/4″ & 1″ 19044

• used

• Manufacturer: Brabender

Blades Stock No. 19044 – Brabender model Intelli-Torque IT7150 extruder. Currently installed 24:’ L/D barrel with 3/4″ screw and included spare 30:1 L/D barrel with 1″ screw. 2003 model year. Includes one each 4″...

6″ Davis Standard 60IN60TPIH 30:1 500 HP VENTED EXTRUDER

• used

• Manufacturer: Davis-Standard

DAVIS STANDARD 150IN 1.5″ 24:1 17708

• used

• Manufacturer: Davis-Standard

Davis Standard model 150IN DS-20 1.5″ extruder, S/N J6173, 1984 model year, 24:1 L/D vented barrel at a 42″ centerline. Davis Standard 6.53:1 gearbox rated for 50 HP with a service factor of 1.25 for a 152 RPM sc...

DAVIS STANDARD 1.5″ 34:1 L/D 17542

• used

• Manufacturer: Davis-Standard
• Model: Thermatic

one (1) used Davis Standard model Thermatic 150 1.5″ extruder, S/N 62570, 34:1 L/D barrel having a five (5) zone electrically heated, air cooled, and non-vented barrel at approximately a 42? centerline height. Ge...

DAVIS STANDARD 1.5″ 20:1 L/D 17504

• used

• Manufacturer: Davis-Standard

One (1) used 1.5″ 20:1 L/D ratio Davis Standard rubber extruder with powered feed roll on throat. Barrel is electrically heated, water cooled (closed loop) and vented at approximately a 42″ centerline height. Inc...