Used packaging

Sturtevant Grinding Base

• Manufacturer: Sturtevant

Sturtevant Grinding Base Used Sturtevant Grinding Base with Syntron FMC virbratory feeder model F-TO-C, S/N GPMF47686

Mikro Pulverizer, Model CF, Brass, 1 HP

• Manufacturer: Mikro

Mikro Pulverizer, Model CF, Brass, 1 HP Used Mikro Pulverizer, model CF, brass construction, 1 hp motor, 115/230V (single phase), gravity feed with hopper, serial# 62J594.

Mikro Pulverizer, Model 1SH, C/S, 5 HP

• Manufacturer: Mikro

Mikro Pulverizer, Model 1SH, C/S, 5 HP Used Mikro Pulverizer, Model 1SH, carbon steel construction, stirrup hammers, single screw feed with hopper, Serial No. 6222. Machine to be supplied with 5 hp main drive an...

28" x 11' Pfaudler Glass-Lined Column, 30#

• Manufacturer: Pfaudler

28" x 11' Pfaudler Glass-Lined Column, 30# Used 28" diameter X 11' high Pfaudler Glass Lined Column, Section 9115 glass, rated 30 psi and full vacuum at 280 f, (2) 3" inlet/outlets, (1) 12" X 16" side manway, ser...

Entoleter Centrifugal Impact Mill, C/S

• Manufacturer: Entoleter

Entoleter Centrifugal Impact Mill, C/S Used Entoleter centrifugal impact mill, carbon steel construction, 14" diameter rotor, on base with 20 HP 230/460 volt motor, cat# 11000700, serial# 6025.

Urschel Centrifugal Slicer, Model S-A, S/S, 3 HP

• Manufacturer: Urschel

Urschel Centrifugal Slicer, Model S-A, S/S, 3 HP Used Centrifugal Urschel slicer, model S-A, stainless steel construction, pan feed, slicing head driven by 3 hp, 230/460 volt motor with brake, serial# 109, built ...

24" x 48" Tycon Glass-Lined Column, 30#

• Manufacturer: Tycon Systems

24" x 48" Tycon Glass-Lined Column, 30# Unused 24" x 48" Tycon Glass Lined Column, approximately 24" x 48" high, rated 30 psi and full vacuum at 280 f, 12" side manway, 8" to nozzle, 8'4" side nozzles, serial # 8...

Fluid Energy Jet-o-Mixer Jet Mill, Model 00, S/S

• Manufacturer: Fluid Energy

Fluid Energy Jet-o-Mixer Jet Mill, Model 00, S/S Used Fluid Energy Jet-o-Mixer jet mill, model 00, stainless steel construction, with Syntron vibratory feeder, on base, serial# T3620E.

Lantech SW-1000 Intermittent Motion Belt Feed Side Seal Wrapper w/ Lantech ST-900 Heat Tunnel

• Manufacturer: Lantech

Units is USED. Some minor scratching/blemishes/scraps/small dents can be seen on the surfaces of the unit, but is not affecting the unit intended use. The unit was removed a working environment and was functionin...

Domino Ink Jet Coder, Model 5400

• Manufacturer: Domino

Domino Ink Jet Coder, Model 5400 Used Domino ink jet coder, model 5400 with multiple print heads, serial# US11100360.

Mikro Pulverizer, Model 2DH, C/S, 15 HP

• Manufacturer: Mikro

Mikro Pulverizer, Model 2DH, C/S, 15 HP Used Mikro Pulverizer, Model 2DH, carbon steel construction, dual screw feeder with 0.33 hp drive, 15 hp 208-230/460 volts main drive, serial #'s 62J571 and 8772.

6" PFA Lined Column

6" PFA Lined Column Used 6" PFA lined column, jacketed.

Jacobson Lump Breaker, Model 1416

• Manufacturer: Jacobsen

Jacobson Lump Breaker, Model 1416 Used Jacobson Full Nelson Crusher lump breaker, model 1416, carbon steel construction, approximately 14" x 16" feed opening, driven by 10 hp, 230/460 volt motor, with feed hopper...

6" Stokes Tornado Mill, S/S

• Manufacturer: Stokes

6" Stokes Tornado Mill, S/S Used Stokes Tornado mill, model 900-044, stainless steel construction, 6" rotor, on portable base with 5 HP 230/460 volt XP motor, serial# 665103, lot# 669217.

Mikro Pulverizer, Model CF, S/S, 1 HP

• Manufacturer: Mikro

Mikro Pulverizer, Model CF, S/S, 1 HP Used Mikro Pulverizer, Model CF, stainless steel construction, screw feed with 0.25 hp 230/460 volt variable speed drive, 1 hp 230/460 volt main drive, on portable base, Seri...