Used torque

9" dia. Stainless Steel Thomas Conveyor Co Screw Auger Conveyor - 11'-6"L

• Manufacturer: Thomas

All stainless steel construction. Bolt-on sectional cover. Discharge: 10" square flange Trough Length: 11'-6" 2HP torque-arm speed reducer & v-belt drive. Power Service: 208-230/460V, 60Hz, 3ph Max. Auger Speed: ...

9" dia. X 8' long Industrial Stainless Steel Screw Feeder Auger Conveyor

Flanged, U-trough with foot-mounting on the end plates Flanged center discharge (blanked) and oversized flange on end discharge 2HP belt drive with guard and torque-arm speed reducer Power required: 230/460V, 60H...

9" Dia X 54"L Screw Feeder with 25 Cubic Foot Loading Hopper Vibrating Bin

Heavy-duty design using welded carbon steel Covered U-trough conveyor welded to hopper from 25° Open top, flanged loading hopper is approximately 52" square Product Discharge: 9"Ø drop-out sleeve Auger Speed: 185...

0.75HP SEW Eurodrive Helical Gearmotor R Series

• Manufacturer: SEW-Eurodrive

ITEM #: 19273 Used 0.75HP SEW Eurodrive Helical Gearmotor R Series Reduction Ratio: 15.63:1Output RPM: 108Output Torque: 290 IN/LBShaft: Ø1.0" keyed230/460V, 60Hz, 3phOverall dimensions: 18x7x7"Weight = 34 LBS A...

2019 COOLBREEZE FB-D-60-0/A

• Manufacturer: COOLBREEZE

Filters Camfil CG35-LGX048 Carbon Filters (48 qty) Merv 8 Pre-Filter Belimo Damper Actuator

2007 RAS 21141-16-DPA

• Manufacturer: RAS

Pulley type: Head Roll | Made in: CANADA | Fitting: B106-100x145 | Bolt torque: 142 Nm

Capmatic Mini Jolly

• Manufacturer: Capmatic

Semi-automatic tightening machine with mechanical and pneumatic movement Completely covered with stainless steel. Description Semi-automatic tightening machine with mechanical and pneumatic movement Completely co...

UNUSED 1HP Sew Eurodrive K37 Helical-Bevel Gearmotor 3.98:1 Ratio

• Manufacturer: SEW-Eurodrive

ITEM #: 21363 UNUSED 1HP Sew Eurodrive K37 Helical-Bevel Gearmotor 3.98:1 Ratio Shaft: Solid, keyed (Ø1.0" X 1.97"L)Output RPM: 1751/440Output Torque: 142 IN/LBSService: 230/460V, 60Hz, 3phOverall dimensions: 2...

6" dia. X 3' long Stainless Steel Industrial Screw Auger Feeder

ITEM #: 18319 Used 6" dia. X 3' long Stainless Steel Industrial Screw Auger Feeder Flanged, U-trough with 43" length and 7" square dischargeEnd plates are foot-mountedAdditional auger included1HP belt drive with ...

12" Dia. x 34' Long Industrial Screw Conveyor

Auger: Carbon steel with standard pitch flighting, 1/8" thick. Trough: Stainless steel, three-section flanged U-trough with twin drop-outs, hanger bearings at connections. Multiple belly patches on trough using c...

- IPP# 211986

• Manufacturer: Hägglunds

UNUSED Hagglunds Viking type MK-64-16300-A0-RN-0100 radial piston type hydraulic motor with rotaing case, high -torque and low speed motor, serial #6114-635343, 16340 cm3/r displacement, 260 Nm/bar torque, 250 ba...

Capmatic Beltstar

• Manufacturer: Capmatic

Inline tightening system Capable of operating at speed of 300 BPM or 90 feet/Minute. One special structure completely made of stainless steel 304 Sealed Electrical cabinet incorporated into the base “C” Frame des...

Ultrasource Matrix

• Manufacturer: Matrix

ULTRASOURCE Matrix Automatic Film Labelers. up to 520mm web width, maximum of 150mm label, high torque motor, Ultrasource controller mounted to free standing posts.

Werner & Pfleiderer ZSK58 F96 Extruder - IPP# 210304

• Manufacturer: WP

twin screw extruder Electric heated barrel with water cooled jacket 84” long (Consisting of 9 blocks each 9.45"), 2.2” diameter discharge Rated for 96 Kpm torque per shaft or 960Nm Outer screw diameter is 57.8 mm...

SEW Eurodrive Helical Gear Unit - 18.21 Ratio

• Manufacturer: SEW-Eurodrive

ITEM #: 20768 Used SEW Eurodrive Helical Gear Unit - 18.21 Ratio Type R107AD5 850287501 12.12.001Input Speed: 1750RPMOutput Speed: 96RPMRatio: 18.21Mounting: M1Torque: 38055 lb inS.E. 1.00Min Amb 10 C Max Amb 4...