Used Processing in New Jersey, USA

Packaging - IPP# 237103

• Manufacturer: IMA(BFB)

Bundler Rate configuration dependant.

Packaging - IPP# 237075

• Manufacturer: FMC

Palletizer

Packaging Carbon Steel - IPP# 237005

• Manufacturer: Salwasser

Case Packer rated for 10 cases/min.

Packaging Carbon Steel - IPP# 237019

• Manufacturer: Combi

Case Packer

Packaging - IPP# 237006

• Manufacturer: FMC

Palletizer, Rated 10 cases per minute.

Bagger Packaging Stainless Steel 304 - IPP# 222990

• Manufacturer: EMDE Industrietechnik GmbH

for EX zone 22 (ATEX 95) lifting height 5m, hoist manufactured by Stahl, type FU-A 1143 13, serial #1531450, driven by 0.20/0.05 Kw, 50Hz, 400 volt, 2655/630 rpm motor, product is then emptied into a 304 stainles...

Bagger Packaging - IPP# 220746

• Manufacturer: Packaging Systems International, Inc

Single spout with adjustable seat. Controls by Flexweigh Corp. Model DWM-4.

Stainless Steel 304 Patterson Kelly Mixer-Twin Shell & Double Cone - IPP# 108282

• Manufacturer: Kelly

blender Maximum density 55 lbs/cubic feet. Shell 48" outer diameter Blender rotation 11 rpm, liquid/solids intensifier bar rotation 1174 rpm 1750 rpm output spped, with belt and drive with protective guard. Inten...

Mixer-Twin Shell & Double Cone 0.57 m3 (20 ft3) Stainless Steel 304 - IPP# 205898

• Manufacturer: Patterson Kelly

shell "V" blender with Intensifier Bar rated 75 Lbs/CuFt Designed for dry blending (2) 18" charge ports with covers, 8" discharge port with manual butterfly valve.

Stainless Steel 304 Patterson Kelly Mixer-Twin Shell & Double Cone - IPP# 216387

• Manufacturer: Kelly

twin shell blender 90 lbs. cu.ft. maximum density shell diameter is 24", manway diameter is 17 & 3/4" with a air operated butterfly valve Electrical requirement is 208/230/460 volts, 3 ph, 60 hz. With brake

Stainless Steel 304 Paul O Abbe RVB 36 Mixer-Twin Shell & Double Cone - IPP# 216377

• Manufacturer: Paul O. Abbe

twin shell blender 36" shell diameter with 18" manway diameter with air operated butterfly valve Electrical requirements are 230/460, 3 ph, 60 hz

Mixer-Ribbon & Paddle 0.99 m3 (35 ft3) Stainless Steel 316 - IPP# 39335

• Manufacturer: Babcock & Wilcox

ribbon mixer Ends of trough unbolt for ribbon removal. Packing glands on shaft. w/Holroyd gear reducer btm discharge with gate valve.

Mixer-Ribbon & Paddle 8.5 m3 (300 ft3) Carbon Steel - IPP# 203129

Jacketed, Carbon steel body and Jacket, 316 SS Clad internal(contact) Single Ribbon Mixer. with CS jacket. Packing glands on shaft, Chain drive with by approximately 30 HP motor and reducer.

Mixer-Ribbon & Paddle 0.42 m3 (15 ft3) Stainless Steel 316 - IPP# 107553

• Manufacturer: Koppers

Unit has twin 2 1/2" diameter shafts with adjustable paddles. Packing glands on shafts. Has 2-section bolt on cover with 10" x 10" feed port, 12" x 16" with loose cover. 26" x 18" bottom discharge. 5 HP, 3/60/230...

Mixer-Ribbon & Paddle 0.1 m3 (3.5 ft3) Stainless Steel 316 - IPP# 704157

• Manufacturer: Babcock & Wilcox

"L" Series ribbon blender Features: hinged lid, removable endplate, interrupted ribbon, external bearings, packing glands 220/250/380/440 volt 69.3 rpm Unit with a built-in on/off switch. Openings: inlet 18" x 9"...