- Trusted Seller
2023 Roundo R4S 4" x 4" x 1/2" Hydraulic Angle Bending Roll
- Manufacturer: Roundo
- Model: R4
Features: Siemens Simatic HMI NC Control Electronic Measurement of Rotation Standard Set Of Bending Rolls Hydraulic Powered Adjustment Of Lower Rolls Hydraulic Guide Rolls Pushing Roll Unit Equipped With: Siemens...
Melville, NY - Trusted Seller
ROUNDO R-4-S
- Manufacturer: Roundo
- Model: R4
ROUNDO (NEW) MODEL R-4-S ANGLE ROLL ANGLE LEG CAPACITY - 4" X 4" X 1/2" LEG OUT - 4" X 4" X 3/8" LEG IN - 5" X 5/8" FLAT ON EDGE - 7" X 1-1/2" FLAT IRON ON FLAT 12.2" ROLL DIAMETER DRIVE ON ALL 3 ROLLS - INFINITE...
Dodge Center, MN - Trusted Seller
Roundo R4
- Manufacturer: Roundo
- Model: R4
Angle leg out: 3.5 x 3.5 x 3/8 | Angle leg in: 3 x 3 x 3/8 | Flat: 1 x 7 | C-channel leg out: 6,2 | Roll dia: 10 | Weight : 5300 | Motor hp: 8.6 | Dimensions (w x l x h): 49 x 49
- Trusted Seller
1981 ROUNDO R4M
- Manufacturer: Roundo
- Model: R4
Completely Refurbished in 2010, c/w Standard rolls, dies for 1-1/2" and 2" pipe Capacity: Roundo R4M capacity chart Video 1 Video 2 Video 3 Video 4
- Trusted Seller
Roundo R-4-S
- Manufacturer: Roundo
- Model: R4
Capacity see table. 3 rollers hydraulically driven. Various rollers included.
Etten-Leur, Netherlands - Trusted Seller
1977 Roundo R4
- Manufacturer: Roundo
- Model: R4
Angles: 90x9 mm | T-steel: 90x10 mm | Flats: 200 x 30 mm | Flats on edge: 100 x 18 mm | Squares: 55 x 55 mm | Rounds: 60 mm dia | Max. force with steel kg/mm2: 30 cm3 | Top roll: 275 mm dia | Shaftdia.: 105 mm |...
Næstved, Denmark 
3.5" x 3.5" x 3/8" ROUNDO #R-4 HYDRAULIC ANGLE BENDING ROLL
- Manufacturer: Roundo
- Model: R4
419-269-2000 870 Curtis Street Toledo, OH 43609 Machine Information 3.5" x 3.5" x 3/8" ROUNDO MODEL #R-4 HYDRAULIC ANGLE BENDING ROLL: STOCK #23594 Stock #: 23594 OB-2094 R-4 1980 3.5" x 3.5" x 3/8" 3" x 3" x 3/8...
Holland, OH
ROUNDO profile rounding machine R-4
- Manufacturer: Roundo
- Model: R4
Used ROUNDO profile rounding machine R-4 Production no: 75402 | Capacity flat iron high edge: 100×18mm | Capacity flat iron low edge: 200×30mm | Capacity angle iron (cap.angleiro): 70×7, 90×9mm | Capacity t-iron:...
Själevad, Sweden
ROUNDO R-4-S
- Manufacturer: Roundo
- Model: R4
New ROUNDO R-4-S – Axle diameter 105 mm – Max cap 30-40 cm3
Själevad, Sweden
Roundo R4 Bending & Forming
- Manufacturer: Roundo
- Model: R4
Good condition Roundo R4 Bending & Formings available between 1965 and 1995 years. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
