Used Processing in New Jersey, USA

RAYNERI Trimix TXR50

• Manufacturer: RAYNERI

Comprehensively tested, used Rayneri model Trimix TXR50 stainless steel process vessel. Manufacturer: Rayneri. Also includes: -The vessel is vacuum rated for deaeration of the product during the mixing cycle. -Th...

Pump-Vacuum - IPP# 208379

• Manufacturer: Wiegand

Steam injection 4 effects with ceramic pistons and VICARB Carbon Block Heat Exchanger, Serial Number 1296, rated -1/3 bar @ 150 degrees C Service Side, volume 16 liter; -1/3 bar @ 150 degrees C process side, volu...

IPP# 601610, Methanol Plant-275 TPD (82,500 TPY) Petrochemical

Current Capacity: 82,500 TPY Product Quality: Methanol A Technology: Process uses natural gas as feedstock with added of carbon dioxide in the reforming furnace

KORUMA Disho V 100/45

• Manufacturer: KORUMA

Used Approximately 12 Gallon Koruma Disho V100/45 Stainless Steel Mixer Manufacturer: Koruma Model: Disho V100/45 Mixer contains a stainless steel jacket with sanitary polished internal, top mounted agitator driv...

MOLTENI MPME700SV-TDS

• Manufacturer: MOLTENI

Used Molteni model MPME700SV-TDS stainless steel triple action vacuum mixer. Manufacturer: Molteni. Also includes: Hydraulically operated raise and lower. For details about the refurbishment work, contact a membe...

DAY 10 HP

• Manufacturer: DAY

Used Day Mixer with Cage Protection Stainless teel agitator with (3) stainless steel fixed baffles Manual operated lift mechanism Side mounted controls Driven by an approximately 10 hp motor

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221211

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac Motor

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221216

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump manufactured by Kinney/Tuthill 0.05 ultimate pressure No oil or water with process contact, and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by a...

Stainless Steel 304 Centrifuge-Disc Bowl - IPP# 238437

• Manufacturer: Disco

continuous disc bowl centrifuge Rated 1 bar @ 50 deg C Sanitary construction for food processing Max feed temp 95 deg C Solids density: 1.42 kg/dm3, Heavy liquid density: 1.20 kg/dm3.Max feed temp 95 deg C. Motor...

Packed Column - IPP# 222790

• Manufacturer: Mechanica Sarda

300 kg/Hr, recovered VCM stripping system, designed to stripping unreacted VCM from PVC slurry process reducing vent gas to less than 1 ppm VCM. This system is EVC Technology, and can be used to strip volatiles f...

Packed Column - IPP# 222789

• Manufacturer: Mechanica Sarda

300 kg/Hr, recovered VCM stripping system, designed to stripping unreacted VCM from PVC slurry process reducing vent gas to less than 1 ppm VCM. This system is EVC Technology, and can be used to strip volatiles f...

Low Temp Chiller 771,107 kcal/h (255 Ref. Ton) - IPP# 216001

• Manufacturer: Trane

CentraVac Low temperture Series R chiller Requires 705 lbs. inlet at 33.8 degrees F, and outlet at 25 degrees F. (4 pass) Condenser NB # 4401, serial # 44010, built in 1996, rated for 300 psi at 300 degrees F.( 2...

OLSA 266 LITRE

• Manufacturer: Olsa

Comprehensively tested, used Olsa Process Mixing Suite. This mixing suite comprises of: 2 off Olsa Pharmaceutical grade mirror polished 316 stainless steel vacuum mixer homogenising vessels. Full hydraulic raise/...

Classifier 762 mm (30 in) Stainless Steel 304 - IPP# 207942

• Manufacturer: Sweco

lined Turbo-Screen Classifier For scalping or dedusting on screens as fine as 20 microns Suction feed through 6" inlet Undersize particles are passed through the screen then are precipitated from the conveying ai...

Hastelloy - C22 Heinkel HF800 Centrifuge-Inverting Filter - IPP# 225440

• Manufacturer: Heinkel

new bearings, seals, belts, rebuilt hydraulic unit, and run in by the OEM 1600 RPM Maximum Solid Haynes Hastelloy C 22 for all process parts, 316SS for balance of exterior parts Clean in place nozzles for solids ...