Used Sheet Metal Processing in Switzerland

1996 PLATARG 2513 Ref No: 46301

• Manufacturer: PLATARG

Can be tested in operation Max. Flywheel speed: 760 1/min. Capacity on one stage approx. 25T Clutch engagement max. 10/min Air pressure 5.5 bar (min) - 5.8 bar (max) Total deceleration time Braking <250 ms Zig...

1977 PLATARG 611 Ref No: 43685

• Manufacturer: PLATARG

A new electrical control system and a mechanical and lubrication rebuild are required. One used PLATARG model 611 transfer press, high speed type. Full follow cams. Number of stations: 12 Number of rams: 11 + 1 s...

1969 PLATARG 312 Ref No: 40583

• Manufacturer: PLATARG

This machine can have the following installed/added to it (not included) o new lubrication o new electrical installation o new protections o CE conformity Number of station 13 (12+1). Capacity on any one station ...

2005 ARKU RM 50X/9 ECOPLAN Ref No: 46236

• Manufacturer: Arku

Cut-To-Length line consisting of: - Coil loading chair HUBTEX - ARKU single-sided decoiler - ARKU VRM 5050/9 feed straightening machine, +- 0.1 mm feeding precision - measuring wheel to verify feed length - Cut-t...

2001 ESNA VFS/PN30 Ref No: 55888

• Manufacturer: ESNA

Object: 55888 | Drive system: eccentric / crank | Openings in uprights: yes | Number of slide actions: 1 | Table cushion: no | Quick die change system: no | Total force (nominal): 30 to | Table surface (left-ri...

2003 NEFF DP 800 Ref No: 46230

• Manufacturer: Neff

Complete hot forming line consisting of: * Hydraulic press NEFF 800 to. * Ruhstrat furnace system: - Natural gas heating - Temperature 930°C - max. lining width: 1850 mm - Furnace length: 10800 mm * Strothmann Fe...

1972 KAISER 60 P Ref No: 42789

• Manufacturer: Kaiser

Object: 42789 | Total force (nominal): 60 to | Slide adjustment: 70 mm | Stroke min.: 11 mm | Stroke max.: 60 mm | Variable speed: yes | Stroke rate (min.): 60 /min | Stroke rate (max.): 240 /min | Strip f...

2002 MIOS T-55 TR Ref No: 55215

• Manufacturer: Mios

Object: 55215 | Drive system: eccentric / crank | Total force (nominal): 55 to | Table surface (left-right): 400 mm | Table surface (front-back): 300 mm | Spigot hole diameter: 45 mm | Stroke: 50 mm | Strok...

2001 MIOS T20 FV Ref No: 55890

• Manufacturer: Mios

Object: 55890 | Drive system: eccentric / crank | Openings in uprights: yes | Number of slide actions: 1 | Table cushion: no | Quick die change system: no | Total force (nominal): 20 to | Spigot hole diameter: ...

2000 IMS 50 RE Ref No: 55279

• Manufacturer: IMS

Object: 55279 | Drive system: eccentric / crank | Total force (nominal): 50 to | Table surface (left-right): 440 mm | Table surface (front-back): 360 mm | Spigot hole diameter: 40 mm | Stroke: 90 mm | Strok...

2002 ESNA VFS/PN45 Ref No: 55264

• Manufacturer: ESNA

Object: 55264 | Drive system: eccentric / crank | Total force (nominal): 45 to | Table surface (left-right): 410 mm | Table surface (front-back): 280 mm | Opening in bed (diameter): 40 mm | Stroke rate (max....

1997 ROSS 63R4 Ref No: 55175

• Manufacturer: Ross

Object: 55175 | Controls: DANFOS | Drive system: eccentric / crank | Frame design: C-frame, single sided, inclinable | Openings in uprights: yes | Number of slide actions: 1 | Table cushion: no | Opening in tabl...

2002 MIOS T20 FV Ref No: 53991

• Manufacturer: Mios

Object: 53991 | Spigot hole diameter: 30 mm | Stroke rate (max.): 155 /min | Stroke min.: 5 mm | Stroke max.: 60 mm | Shut height (stroke down, adjustment up), bdc: 280 mm | Throat (c-frame): 180 mm | Tota...

2000 PRESSIX 100 CNR 4 Ref No: 51223

• Manufacturer: Pressix

Located in Barcelona - Spain 2 identical units available

STRIP STRAIGHTENING MACHINE “HFA” TYPE JMS-100

SKU: 2200038