Machine Tools » Sheet Metal Processing » Switzerland

Building Filters

111

Used Sheet Metal Processing in Switzerland

  • Trusted Seller
    2002 ESNA VFS/PN45 Ref No:

    2002 ESNA VFS/PN45 Ref No: 55264

    • Manufacturer: ESNA

    Object: 55264 | Drive system: eccentric / crank | Total force (nominal): 45 to | Table surface (left-right): 410 mm | Table surface (front-back): 280 mm | Opening in bed (diameter): 40 mm | Stroke rate (max....

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1997 ROSS 63R4 Ref No:

    1997 ROSS 63R4 Ref No: 55175

    • Manufacturer: Ross

    Object: 55175 | Controls: DANFOS | Drive system: eccentric / crank | Frame design: C-frame, single sided, inclinable | Openings in uprights: yes | Number of slide actions: 1 | Table cushion: no | Opening in tabl...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2002 MIOS T20 FV Ref

    2002 MIOS T20 FV Ref No: 53991

    • Manufacturer: Mios

    Object: 53991 | Spigot hole diameter: 30 mm | Stroke rate (max.): 155 /min | Stroke min.: 5 mm | Stroke max.: 60 mm | Shut height (stroke down, adjustment up), bdc: 280 mm | Throat (c-frame): 180 mm | Tota...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2000 PRESSIX 100 CNR 4

    2000 PRESSIX 100 CNR 4 Ref No: 51223

    • Manufacturer: Pressix

    Located in Barcelona - Spain 2 identical units available

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1970 FEINTOOL GKP F 100/160

    1970 FEINTOOL GKP F 100/160 Ref No: 38727

    • Manufacturer: FEINTOOL

    The press can currently not be inspected in operation Reconstruction of the complete mechanical system and the hydraulic system. New electrical panel. Servomotor in the feeder. All in 2017.

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1971 FEINTOOL GKP F 50/80

    1971 FEINTOOL GKP F 50/80 Ref No: 43700

    • Manufacturer: FEINTOOL

    Info to the Press - good mechanical condition - incl. servo feeders - frequency converter for the main drive motor, i.e. infinitely variable speed - CE

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2001 FEINTOOL HLT 1250 Ref

    2001 FEINTOOL HLT 1250 Ref No: 44927

    • Manufacturer: FEINTOOL

    Long table fineblanking press, specifically useful for progressive/transfer operations The press was only used rarely. Hours of operation: 4'682 Stroke count: 1.2 Mio

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2008 MÜLLER PMLE 250 X

    2008 MÜLLER PMLE 250 X 2000 R-HK Ref No: 50719

    • Manufacturer: Muller

    Machine hours: 20,391 h (operating hours) Adjustment strokes: 20, 39, 69, 99, 125, 148, 165, 175, 180 mm Equipment: - External connecting rods for high tilt stability - Hydraulic overload protection - Press force...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1985 PLATARG 712 Ref No:

    1985 PLATARG 712 Ref No: 43759

    • Manufacturer: PLATARG

    Technical details of the machine below: - Stations 12 - Station distance 82.55 mm - max. strip width 90 mm - max. strip thickness 1.63 mm - max. blank diameter 52 mm (standard) 44 mm (zig-zag) - min. blank diamet...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1970 FEINTOOL GKP 50/80 Ref

    1970 FEINTOOL GKP 50/80 Ref No: 56413

    • Manufacturer: FEINTOOL

    Object: 56413 | Total force (nominal): 80 to | Stroke rate (max.): 72 /min | Lower table (left-right): 470 mm | Lower table (front-back): 420 mm | Upper table (left-right): 400 mm | Upper table (front-back)...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1983 FEINTOOL GKP 160 Ref

    1983 FEINTOOL GKP 160 Ref No: 46191

    • Manufacturer: FEINTOOL

    The press, including the straightening line, is still in operation and can be inspected under power The machine was mechanically overhauled in 2016 ( articulation). Since then, the machine has made 27,538,408 str...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1995 FEINTOOL MFA 2500 Ref

    1995 FEINTOOL MFA 2500 Ref No: 46188

    • Manufacturer: FEINTOOL

    Can be inspect in running condition Object: 46188 | Controls: HARDMEIER CONTROL | Drive system: knuckle-joint | Feedstock transport direction: right to left | Total force (nominal): 250 to | Stroke: 67 mm | Str...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    WATERBURY FARRELL 010-012 Ref No:

    WATERBURY FARRELL 010-012 Ref No: 55478

    • Manufacturer: Waterbury Farrel

    Make: Waterbury Farrel Model: 1012+1 ICOP Serial No: ST-237803 62 238149 Condition: Used, Overall in Great shape PLUNGERS ARE IN EXCELLENT SHAPE Slide is in Very Good shape Make: Waterbury Farrel Model: 1012+1 IC...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    WATERBURY FARRELL 015-012 Ref No:

    WATERBURY FARRELL 015-012 Ref No: 55442

    • Manufacturer: Waterbury Farrel

    Waterbury Farrel 512 Plus 1 ICOP Transfer Press * Minster Clutch Brake Combo * 1.725" total Stroke - Can draw parts about .7" long * Side Shaft activated strip and release system * 9 Stripper Forks plus the Cup H...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    WATERBURY FARRELL 010-012 Ref No:

    WATERBURY FARRELL 010-012 Ref No: 55440

    • Manufacturer: Waterbury Farrel

    Waterbury Farrel 1012 ICOP Transfer Press Refurbished w Minster Clutch Mint! * Most Everything Refurbished! We can do more if you want more done. * Plungers and Caps Scrapped back into Perfection * Roller Boxes d...

    Niederhelfenschwil, Switzerland
34567

Overview

Sheet metal processing involves the cutting, bending, and assembling of sheet metal to create different products and structures. This category includes machinery such as presses, shears, lasers, and CNC machines, all designed to handle various types of metal sheets for industries like automotive, aerospace, and construction.

FAQ

What should I consider when buying used sheet metal processing equipment?

Check the machine's age, condition, and maintenance history. Verify its compatibility with your specific metal types and thicknesses, as well as its operational accuracy and efficiency.

How can I ensure safe shipping of sheet metal processing equipment?

Hire a specialized heavy machinery transport service. Ensure the equipment is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for sheet metal processing equipment?

Regular maintenance includes inspecting and lubricating moving parts, checking electrical systems, and cleaning to prevent dust buildup. Refer to the manufacturer's manual for specific maintenance intervals and procedures.