Machine Tools » Sheet Metal Processing » Switzerland

Building Filters

104

Used Sheet Metal Processing in Switzerland

  • Trusted Seller
    1983 FEINTOOL GKP 160 Ref

    1983 FEINTOOL GKP 160 Ref No: 46191

    • Manufacturer: FEINTOOL

    The press, including the straightening line, is still in operation and can be inspected under power The machine was mechanically overhauled in 2016 ( articulation). Since then, the machine has made 27,538,408 str...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1995 FEINTOOL MFA 2500 Ref

    1995 FEINTOOL MFA 2500 Ref No: 46188

    • Manufacturer: FEINTOOL

    Can be inspect in running condition Object: 46188 | Controls: HARDMEIER CONTROL | Drive system: knuckle-joint | Feedstock transport direction: right to left | Total force (nominal): 250 to | Stroke: 67 mm | Str...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    WATERBURY FARRELL 010-012 Ref No:

    WATERBURY FARRELL 010-012 Ref No: 55478

    • Manufacturer: Waterbury Farrel

    Make: Waterbury Farrel Model: 1012+1 ICOP Serial No: ST-237803 62 238149 Condition: Used, Overall in Great shape PLUNGERS ARE IN EXCELLENT SHAPE Slide is in Very Good shape Make: Waterbury Farrel Model: 1012+1 IC...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    WATERBURY FARRELL 015-012 Ref No:

    WATERBURY FARRELL 015-012 Ref No: 55442

    • Manufacturer: Waterbury Farrel

    Waterbury Farrel 512 Plus 1 ICOP Transfer Press * Minster Clutch Brake Combo * 1.725" total Stroke - Can draw parts about .7" long * Side Shaft activated strip and release system * 9 Stripper Forks plus the Cup H...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    WATERBURY FARRELL 010-012 Ref No:

    WATERBURY FARRELL 010-012 Ref No: 55440

    • Manufacturer: Waterbury Farrel

    Waterbury Farrel 1012 ICOP Transfer Press Refurbished w Minster Clutch Mint! * Most Everything Refurbished! We can do more if you want more done. * Plungers and Caps Scrapped back into Perfection * Roller Boxes d...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    WATERBURY FARRELL 015-012 Ref No:

    WATERBURY FARRELL 015-012 Ref No: 55436

    • Manufacturer: Waterbury Farrel

    4 1/4" CAM SHAFT TOTAL STROKE - MEASURED TO BE 4.25. AIR CLUTCH AND BRAKE - MINSTER NEW SIDE SHAFT INCLUDING BUSINGS NEW PINION GEARS- NEW, TOP AND BOTTOM (ALL 4) NEW TRANSFER MECHANISM - DOVE TAIL SLIDE AND BRO...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    WATERBURY FARRELL 020-012 Ref No:

    WATERBURY FARRELL 020-012 Ref No: 55438

    • Manufacturer: Waterbury Farrel

    Waterbury Farrel 2012 ICOP Trasfer Press - Late Model Round Plungers * Round Plungers with Roller Boxes * 12 Operations plus Slave 13th * Side Shaft Driven Strip & Release System * Newer Slide and Newer Die Shoes...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2003 FEINTOOL MFA 1600 Ref

    2003 FEINTOOL MFA 1600 Ref No: 42972

    • Manufacturer: FEINTOOL

    !! very well maintained machine !!! 2016 Overhaul by Feintool: + knuckle joint replaced + ram guides and roller shoe replaced + new base and table plate + new v-ring, counterholder and touch table piston + new ba...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1991 FEINTOOL MFA 2500 Ref

    1991 FEINTOOL MFA 2500 Ref No: 40452

    • Manufacturer: FEINTOOL

    + Control system completely renewed in 2015 Object: 40452 | Last overhaul: 2015 | Controls: BECKHOFF | Drive system: knuckle-joint | Feedstock transport direction: left to right | Total force (nominal): 250 to |...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1988 PLATARG 912 Ref No:

    1988 PLATARG 912 Ref No: 50350

    • Manufacturer: PLATARG

    1 station from 336º to 242º stroke 77 mm 2 station from 278º to 110º stroke 111 mm 3 station from 284º to 110º stroke 124 mm 4-12 station from 284º to 110º stroke 154 mm Shell height max 154/2 = 77 mm Ejector str...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1999 KOHLER 50.140/21-3000.1VSRM + HK

    1999 KOHLER 50.140/21-3000.1VSRM + HK Ref No: 46805

    • Manufacturer: Kohler

    KOHLER coil line consisting of: - Coil loading chair CS3000 - Decoiler 300.1 H - VSRM 50.140/21 leveller - HK 140 upright leveller

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2021 SACFORM RMS11-604 Ref No:

    2021 SACFORM RMS11-604 Ref No: 42826

    • Manufacturer: SACFORM

    Object: 42826 | Controls: SCHNEIDER | Sheet width max.: 600 mm | Sheet thickness max.: 4 mm | Feed velocity max.: 32 m/min | Feedstock transport direction: left to right | Sheet width (min): 60 mm | Sheet th...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1994 KAISER KSTU ZA 2000-15P

    1994 KAISER KSTU ZA 2000-15P Ref No: 43706

    • Manufacturer: Kaiser

    + Coil feed line KOHLER with straightener KRE2 18.260/19 + Feeder KAISER KWV 250 + 2-axis gripper bars transfer SANDER with adjustable pitch + table cushion rail with various cushions and fillers (separate data s...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2003 ROSS 80R4 Ref No:

    2003 ROSS 80R4 Ref No: 55280

    • Manufacturer: Ross

    Object: 55280 | Drive system: eccentric / crank | Total force (nominal): 80 to | Table surface (left-right): 570 mm | Table surface (front-back): 390 mm | Thickness of bolster plate: 70 mm | Opening in bed (...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1997 SANGIACOMO T 15 CE

    1997 SANGIACOMO T 15 CE Ref No: 55256

    • Manufacturer: San Giacomo
    • Model: T 15 CE

    Object: 55256 | Drive system: eccentric / crank | Total force (nominal): 15 to | Table surface (left-right): 360 mm | Table surface (front-back): 260 mm | Stroke rate (max.): 165 /min | Slide adjustment: 40 ...

    Niederhelfenschwil, Switzerland
23456

Overview

Sheet metal processing involves the cutting, bending, and assembling of sheet metal to create different products and structures. This category includes machinery such as presses, shears, lasers, and CNC machines, all designed to handle various types of metal sheets for industries like automotive, aerospace, and construction.

FAQ

What should I consider when buying used sheet metal processing equipment?

Check the machine's age, condition, and maintenance history. Verify its compatibility with your specific metal types and thicknesses, as well as its operational accuracy and efficiency.

How can I ensure safe shipping of sheet metal processing equipment?

Hire a specialized heavy machinery transport service. Ensure the equipment is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for sheet metal processing equipment?

Regular maintenance includes inspecting and lubricating moving parts, checking electrical systems, and cleaning to prevent dust buildup. Refer to the manufacturer's manual for specific maintenance intervals and procedures.