Used Sheet Metal Processing in Germany

Trusted Seller
Perthel Pipe Bending Tool - 16 - 76 mm / 3/8″ to 3 1/4″ 27010
- used
- Manufacturer: Perthel
Ring bending machine, profile bending machine, three roll bending machine, bending machine, tube bending tool
$94 USD
Wiefelstede, Germany
Trusted Seller
Ramming factories muntin and miter punch - miter punch 29261
- used
- Manufacturer: Rammefabriken
Muntin and miter punch, muntin punch Manufacturer: Ram factories, mechanical corner punching machine | Intermediate dimension: 100 mm | Adjustment depth: 65 mm | Dimensions: 1700/600/H1080 mm | Mass: 118 | Intern...
$996 USD
Wiefelstede, Germany
Trusted Seller
Auction
2000 - Strip coating line
- used
Facility consisting of: Coil carriage, unwinding coiler, feed and tensioning rollers, coating unit Eco Spross, built in 2008, drying tunnel, cooling tunnel, recoiler, coil transfer station and incl. various appli...
Wuppertal, Germany
Visit Auction Website
Trusted Seller
Stainless steel heat-resistant of various - material - cut-outs 26116
- used
- Manufacturer: Theodor Eberlei
stainless steel, VA, chrome nickel steel, material blanks, stainless steel, chrome steel, rust free -round steel, tubes and sheets
Wiefelstede, Germany
Trusted Seller
MÜLLER WEINGARTEN Strip Straightening Machine
- used
- Manufacturer: Müller Weingarten
SCOPE OF DELIVERY/ COMPONENTS: - Coil carrier with separate crop shear - single sided de-coiler, - max coil width 2000mm, max weight 30tons - Two exchangeable straightening units ( cassette type ) with 13 straigh...
Freudenberg, Germany
WMT HR 300
- new
- Manufacturer: WMT
Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm
Velen, Germany
WMT 305-1
- new
- Manufacturer: WMT
Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm
Velen, Germany
HBM 1015-1
- new
- Manufacturer: HBM - Hottinger
- Model: 1015-1
Control: conventional | Delivery: ab Lager | Material width: 1015 mm | Material thickness: 1 mm | Speed: von Hand | Weight: 240 Kg | Dimensions: 1420 x 600 x 750 m
Velen, Germany
UWM UWM 30 H
- new
- Manufacturer: UWM
Electric roller profile with - 5 set of rollers 2x 20mm and 30mm for round material, 1x for flat material 1x for square material 1x for? - footswitch
Velen, Germany
Trusted Seller
2013 REIS TUS 400-250 Spotting Press
- used
- Manufacturer: Reis
- Model: TUS
HYDRAULIC PRESS FOR DIE SPOTTING IN 4-COLUMN DESIGN - Moving bolster with max. 100 ton payload - Swivel carriage with max. 50 ton payload - Swivel area 180° - Table area 4000 x 3000 mms - SICK Light barrier in th...
Freudenberg, Germany
2001 GLASER GDM 3/0
- used
- Manufacturer: GLASER
Multi-purpose iron twister with profile bending attachment - Two driven rollers - 2 speeds - Manual feed of the upper roller - Incl. large number of bending tools see pictures
Velen, Germany
Trusted Seller
Folding machine
- used
Addition Used, lightly used, and very well-preserved folding machine for efficient folding of sheet metal (for pipe production). Further information Working principle: The sheet to be folded is inserted into a co...
Wiesbaden, Germany
UWM UWM 1000
- new
- Manufacturer: UWM
- Model: 1000
Control: conventional | Delivery: ab Lager | Weight max.: 1000 Kg | Workpiece diameter: 20 - 800 mm | Drum diameter: 200 x 50 mm | Feed: 80 - 1600 mm/min | Total power requirement: 0,23 kW | Dimensions of the ma...
Velen, Germany
DUMETA D-DWR-1-D
- new
- Manufacturer: DUMETA
Control: conventional | Delivery: ab Werk | Weight max.: 1000 kg | Workpiece diameter: 20-800 mm | Connected load frequency: 230 V | Speed: 100 - 1000 mm/min | Total power requirement: 0,1 kW | Weight of the mac...
Velen, Germany
WMT 1000 HDTR
- new
- Manufacturer: WMT
roller block - Torch tripod - Speed infinitely variable - foot switch - User manual in English
Velen, Germany
Haeusler VRM-HY Sheet Metal Processing
- used
- Manufacturer: Haeusler
- Model: VRM-HY
Good condition Haeusler VRM-HY Sheet Metal Processing available between 1968 and 2007 years. Located in USA and other countries. Click request price for more information.
USA