Used Granulators & Pelletizers in Illinois, USA

CUMBERLAND 56T PADDLE FEED GRANULATOR 18380

• Manufacturer: Cumberland

Cumberland model 56T paddle roll granulator. S/N 209350-08005. 8″ x 56″ feed throat. 3 knife rotor, 2 bed knife. 20 HP 230/460-volt motor. Paddles are powered by a 1 HP A/C motor. 6″ OD airveyor discharge. Mounte...

NELMOR G12295M1 GRANULATOR 16892

• Manufacturer: Nelmor

Nelmor model G12295M1 granulator. S/N 8912-28690. 12″ x 29.5″ feed throat, 2 knife open rotor, dual 15HP 208-230/460V motors. Modified rear facing double wall tray feed hopper, bin discharge. Mounted on casters, ...

NELMOR G1454MB GRANULATOR WITH FEED 6844

• Manufacturer: Nelmor

Nelmor model G1454MB granulator. S/N 8007-11566. 14″ x 54″ feed throat, 3 knife solid rotor, 2 bed knife, 50HP 230/460V motor, tray feed hopper. Airveyor discharge with Bindicator and 4″ OD outlet. Mounted on a 5...

CUMBERLAND 584 TWIN SHEAR GRANULATOR 18483

• Manufacturer: Cumberland

Cumberland model 584 granulator. S/N 435600-797. 14″ x 20″ feed throat. 3 knife twin shear rotor, 2 bed knife. 20 HP 460-volt motor. Insulated tray feed hopper with additional rear 10″ x 21″ in-feed. Insulated bo...

NELMOR G1012M1 GRANULATOR 14870

• Manufacturer: Nelmor

Nelmor model G1012M1 granulator. S/N 8612-25141. 10″ x 12″ feed throat, 3 knife open rotor, 2 bed knife. 7.5HP 208-230/460V motor. Insulated tray feed hopper with rear 3″ x 12″ wide sheet feed swing out. Nelmor m...

NELMOR G1012LS LOW SPEED GRANULATOR 16141

• Manufacturer: Nelmor

Nelmor model G1012LS low speed granulator. S/N 9206-31452. 10″ x 12″ feed throat, 5 knife solid rotor, 2 bed knife. 5HP 230/460V motor through a gearbox. Chain and sprocket driven rotor. Double wall top robot / h...

NELMOR G1012LS LOW SPEED GRANULATOR 16580

• Manufacturer: Nelmor

Nelmor model G1012LS low speed granulator. S/N 8710-26404. 10″ x 12″ feed throat. 5 knife solid rotor, 2 bed knife. 3HP 230/460V. SEW-Eurodrive motor and gearbox. Chain and sprocket driven rotor. Insulated top ro...

NELMOR G810M1 GRANULATOR WITH PROFILE 16628

• Manufacturer: Nelmor

Nelmor model G810M1 granulator, S/N 7205-4995. 8″ x 10″ feed throat, 3 knife solid rotor, 2 bed knife cutting chamber, 5HP 230/460V motor. Double wall tray feed hopper, with right hand 3.5″ x 3.5″ profile chute b...

NELMOR G1012M1 GRANULATOR WITH FEED 5602

• Manufacturer: Nelmor

Nelmor model G1012M1 granulator. S/N 7908-13725. 10″ x 12″ feed throat. 3 knife open rotor, 2 bed knife. 10HP 230/460V motor. 3/4HP side mounted blower discharge with 4″ OD outlet. 9″ wide front mounted knurled s...

NELMOR G1820M1 GRANULATOR 18469

• Manufacturer: Nelmor

Nelmor model G1820M1. No S/N. 18″ x 20″ feed throat. 3 knife open rotor, 2 bed knives. Tangential cutting chamber. 30 HP 230/460-volt motor. Insulated conveyor feed hopper and body panels. 6″ OD right hand airvey...

NELMOR G1220M1 GRANULATOR WITH SIDE 16617

• Manufacturer: Nelmor

Nelmor model G1220M1 granulator. S/N 7612-10077. 12″ x 20″ feed throat, 3 knife solid rotor, 2 bed knife. 20HP 230/460V motor. Single wall tray feed hopper evacuated by a side mounted Nelmor model F410 1HP blower...

NELMOR G1220M1 GRANULATOR WITH PIPE 16678

• Manufacturer: Nelmor

Nelmor model G1220M1 granulator. S/N 8010-15995. 12″ x 20″ feed throat, 3 knife solid rotor, 2 bed knife, 25HP 230/460V motor. Left hand 10″ x 5.75″ side profile chute, in-feed only. Side mounted 5003FD 3HP blowe...

GRANUTEC TFG810-10 FEED ROLL GRANULATOR 17391

Granutec model TFG810-10 granulator, S/N 0109.4765, 8″ x 10″ feed throat, 3 knife rotor, 2 bed knife, 10 HP 460-volt motor, rear 10″ wide smooth steel feed roll in-feed powered by a 1/2 HP 90-volt D/C motor and v...

Cumberland Granulator,

• Manufacturer: Cumberland
• Model: 584

53482001 Used Cumberland Granulator, Model 584. 14" x 20" Feed throat. (3) knife open rotor, (2) Bed knives. Driven by a 20hp, 3/60/230/460 volt, 1755 rpm motor. Set up for bottom blower discharge. hopper with cu...

NELMOR G810LS LOW SPEED GRANULATOR 18777

• Manufacturer: Nelmor

Nelmor model G810LS low speed granulator. S/N 00L04331. 8″ x 10″ feed throat. 3 knife solid rotor with 2 bed knives. Rotor powered by a 3 HP (2.2 Kw) 460-volt motor via gearbox and chain & sprocket drive system. ...