Used Granulators & Pelletizers in Illinois, USA

SEM / NELMOR G1220M1P GRANULATOR 18498

• Manufacturer: Nelmor

SEM model 22 granulator (Nelmor G1220M1P S/N 9301-32391) 12″ x 20″ feed throat. 3 knife solid rotor, 2 bed knife. 20 HP 208-230/460-volt motor. Tray feed hopper with sound enclosure. 4″ OD right hand airveyor dis...

NELMOR G810LS LOW SPEED GRANULATOR 18777

• Manufacturer: Nelmor

Nelmor model G810LS low speed granulator. S/N 00L04331. 8″ x 10″ feed throat. 3 knife solid rotor with 2 bed knives. Rotor powered by a 3 HP (2.2 Kw) 460-volt motor via gearbox and chain & sprocket drive system. ...

IRWIN CHESAW CH-LH 28.7-04 GRANULATOR 12597

• Manufacturer: Irwin

Irwin Chesaw type CH-LH 28.7-04 granulator, S/N 7915, 5″ x 33″ rotor cutter, 15HP 208-230/460V 1,760 RPM through a fan cooled 10:1 gearbox. Lincoln auto-lube system, evacuated by a 5HP 208-230/460V 3,460 RPM blow...

NEW CUMBERLAND 1837B GRANULATOR 50510-23002

• Manufacturer: Cumberland

New Cumberland 1837B granulator, S/N 50510-23002, 2024 model year, 18″ x 37″ feed throat, 3 knife high shear rotor, 2 bed knife, 100 HP 230/460-Volt 1800 RPM motor, conveyor in-feed hopper, belt drive, 6″ right h...

NELMOR G1215P1 GRANULATOR WITH FEED 16280

• Manufacturer: Nelmor

Nelmor model G1215P1 granulator. S/N 99K03325. 12″ x 15″ feed throat, 3 knife open rotor, 2 bed knife 15HP 208-230/460V 1,480 RPM motor. Double wall rear top hand feed with front mounted knurled steel feed rolls,...

CONAIR CG1424 (RAPID R24) GRANULATOR 12486

• Manufacturer: Conair

Conair model CG1424 granulator (Rapid R24), S/N 410.105. 14″ x 24″ feed throat, 3 knife open rotor, 2 bed knife, tangential cutting chamber. 25HP 230/460V motor. Dual fly-wheel insulated tray feed hopper with 17″...

NELMOR G1436MB SHEET FEED GRANULATOR 16953

• Manufacturer: Nelmor

Nelmor model G1436MB granulator. S/N 9604-37866. 14″ x 36″ feed throat, 3 knife solid rotor, 2 bed knife, 100HP 230/460V 1,770 RPM motor, wire for 460V. MB series heavy duty out-board bearing design. 8″ OD right ...

GRANULATOR FEED ROLLS 6929

Used granulator feed rolls. 41.5″ wide x 4.5″ knurled steel feed rolls powered by a 2HP 1,750 RPM 230V/460V motor into a 15:1 gearbox. Rolls are chain and sprocket driven.

Universal Milling Technology Pellet Mil

• Manufacturer: Universal Milling Technology

51972001 Used Universal Milling Technology Pellet Mill; Model C165; 6 to 1 reduction gear box; 250 HP Moto; Center Feeder on door with motor and reducer; 8 roller assemblies(4 Sets); Conditioner; produces up to 4...

ACCRAPAK SYSTEMS LAB PELLETIZER 18126

One (1) used Accrapak Systems model 750/1B laboratory strand pelletizer. 1″ entrance. 24 knife solid helical rotor. 1 HP drive motor. Includes 4″ air knife. S/N 5288-9-95

PTI TS4500 4.5" Pelletizing Line – 200 HP Extruder, Water Ring Pelletizer

• Manufacturer: PTIPTI

10755160 Used PTI Pelletizing Line, Model TS4500, 4.5" Diameter. 30:1 L/D Extruder having an electrically heated, water cooled (closed loop), and side vented barrel at a nominal 42? center-line height. The gearbo...

IRWIN CHESAW CH-LH 28.7-04 GRANULATOR 12598

• Manufacturer: Irwin

Irwin Chesaw type CS-LH 28.7-04 granulator, no serial number, 5″ x 33″ rotor cutter, 15HP 208-230/460V 1,760 RPM motor through a fan cooled 10:1 gearbox. Lincoln auto-lube system, evacuated by a 4″ auger system, ...

HERBOLD SMS45/160-H5-2 FEED ROLL GRANULATOR 16612

• Manufacturer: Herbold

Herbold model SMS45/160H5, two (2 granulators, S/N 3696 (x2). 23.5″ x 61″ feed throat, belt driven 5 knife open rotor, 2 bed knife, 100HP 230/460V motor. . there is a 11-3/4″ x 30″ parts chute granulator chamber ...

CALIFORNIA PELLET MILL CONDITIONER 17333

• Manufacturer: California Pellet Mill

One (1) California Pellet Mill conditioner for use with a pellet mill. Mixing section measures approximately 28″ in diameter x 8′ long. Unit is belt driven by approximately a 15 HP motor through a gear reducer

NELMOR RF1215M1 GRANULATOR W/SIDE MOUNTED 17472

• Manufacturer: Nelmor

Nelmor model RG1215M1 granulator, S/N 8001-14279, 12″ x 15″ feed throat, 3 knife solid rotor, 2 bed knife, 20 HP 230/460-volt motor, insulated tray feed hopper and body panels, hydraulic jack back assisted hopper...