Used Processing in New Jersey, USA

Water Cooled Chiller Carbon Steel - IPP# 212476

• Manufacturer: York

307 KW packaged reciprocating chiller type JS 84 EF 3S, serial # L9024/08J, factory test pressure 450 PSIG voltage by 3~/400 V/50Hz/207 FW LRA/975 PW LRA 8 cylinder, with reduction capacity 100-75-50-25 (1) contr...

Temperature Control Skid for Jacket Chilling - IPP# 233383

Cooling Skid

Low Temp Chiller - IPP# 207433

• Manufacturer: FES

Zero Degree Glycol chiller Chiller use's 1250 lbs. of R-22 refrigerant Compressor is by FES and exchangers are by FES, and Thermo Power-York. MAWP is 300 psi at 400 degrees F, MDMT is -20 at 300 degrees F Glycol ...

Carbon Steel CaptiveAire Integrated HVAC Soluctions CASRTU3-1.300-18-20T Compressor Chiller - IPP# 246471

• Manufacturer: CaptiveAire Integrated HVAC Soluctions

20 Ton , 3000 SCFM Roof top heat and ac system--12 SEER

Compressor Chiller 907,200 kcal/h (300 Ref. Ton) - IPP# 238369

• Manufacturer: York

rotary Screw Compressor, max speed 4500 rpm, Design pressure High 350 psig., low 300 psig.-rated 298 BHP.

Compressor Chiller 124,000 kcal/h (41 Ref. Ton) - IPP# 705721

• Manufacturer: Bitzer

492,000 kcal/hr associated shell and tube condenser water 15 deg C in, 6 deg C out.

Stainless Steel 304 Bird 36 Centrifuge-Screen Bowl - IPP# 201474

• Manufacturer: Bird

contour screen bowl centrifuge Main drive is a Reliance 444T frame TEFC motor 200 hp, 3/60/460 volt oil system driven by a Reliance 143T TECF 1 hp 3/60/460 volt motor

Stainless Steel 304 Krauss Maffei SB 1000/2 Centrifuge-Pusher - IPP# 240175

• Manufacturer: Krauss-Maffei

1000 mm product contact two stage pusher centrifuge Plant # 5101-0620-32 Basket diameter is 1032 mm, x 315 mm x 315 mm. (estimated inner basket of 932 mm) With two stage washing Originally designed for maximum fe...

Centrifuge-Pusher 800 mm (31.5 in) Stainless Steel 316 - IPP# 71232

• Manufacturer: Krauss Maffei

single stage 19 HP (14 KW), 3/50/500 volts pump motor Handbrake

Centrifuge-Pusher 400 mm (15.7 in) Hastelloy - - IPP# 39547

• Manufacturer: Escher Wyss

2-stage pusher centrifuge B #357-62 400mm inside diameter 1st stage; 330mm inside diameter 2nd stage Rubber lined casing 316 stainless steel front cover Basket belt driven by 30 HP (22 KW), 3/50/415 volt, 1450 RP...

Centrifuge-Pusher 686 mm (27 in) Stainless Steel 316 - IPP# 87347

• Manufacturer: Krauss Maffei

27" single stage pusher type centrifuge Racetrack discharge 20 HP 3/60/550 volt Approximately slot width .012" Handbrake

Centrifuge-Pusher 281 mm (11.1 in) Stainless Steel - IPP# 207273

• Manufacturer: Krauss Maffei

2 stage pusher centrifuge can only be used as a SZ 21 because the 2nd drum is missing with 1.4571 stainless steel housing, belt driven by (2) electrical motors first motor: 4kW, manufactured by Schorch, type KA91...

Centrifuge-Pusher 787 mm (31 in) Stainless Steel 316 - IPP# 208505

• Manufacturer: Escher Wyss

Multi Stage Pusher Centrifuge

Centrifuge-Peeler 1,250 mm (50 in) Stainless Steel 316 - IPP# 104373

• Manufacturer: Krauss Maffei

siphon peeler. Chute discharge. W/hydraulic operated unloader and siphon Will be provided after sale basket- size1250mm x 630mm interlocks wired to junction box and hydraulic unit top operate unloader and siphon

Centrifuge-Peeler 1,250 mm (49.2 in) Stainless Steel Austenitic - IPP# 206222

• Manufacturer: Krauss Maffei

horizontal peeler centrifuge wall thickness 25 mm 80mm feed, 300mm discharge on front door, hydraulic plow, central lubrication system, and controls