Used Forging

Johnson Gas Forge

• used

• Manufacturer: Johnson

Up for auction is a Johnson Gas Metal forge. The table has two small gas operated forges and a smelter. I do not know if this unit works as it hasn't been used in decades. **NOTE** Buyer is responsible for loadin...

GFM SX 06 Radial Forging Machine

• used

• Manufacturer: GFM

Forging force: 80 Ton | Number of hammers: 4 | Number of strokes per minute: 1,200/minute | Range of shift on diameter: 35 mm | Forging eccentric: 3 mm | Firing hammer length: 150 mm | Basic material maximum dia...

2012 INDUCTOTHERM VIP POWER TRAK

• used

• Manufacturer: Inductotherm

Inductotherm VIP Power Trak, 75 KW, 3200 HZ, 100 Lift Swing

2005 INDUCTOTHERM VIP POWER TRAK 750-10CR

• used

• Manufacturer: Inductotherm

Inductotherm Induction Melting Furnace, VIP Power Trak 750-10CR, 750 Kw, 1200 Hz, 6000 Lb Duraline Hydraulic Tilting Box

2014 Clansman Dynamic Model C2100 Rail-Bound Forging Manipulator

• used

• Manufacturer: Clansman

Features: 6 Axes of Movement 270 Degree Cab Rotation Equipped With: 6 Axes of Movement 270 Degree Cab Rotation 400L Hydraulic Tank 460VAC,3PH, 60Hz, 100A Power requirements NOTE: Purchased New in 2014, Used for 2...

HYDAC Corporation SB330-32F1/112S-210E Bladder Accumulator 2054260

• used

• Manufacturer: Hydac

Roemheld 1545105 Block Cylinder

• new

• Manufacturer: Roemheld

6" National Automated Forging Cell Re:24889

• used

• Manufacturer: National

Very good working condition Available for immediate inspection and delivery Still installed and under power for inspection

4" National Upset Forging Machine - Re:24376

• used

• Manufacturer: National

Equipped with Air Clutch & Brake The machine is available for inspection at our Cleveland, Ohio warehouse on request.

National #2 Forge Reduceroll Re:24617

• used

• Manufacturer: National

This machine is available for viewing in Cleveland, Ohio.

40,000 kg Schloemann (Beche) CounterBlow Forging

• used

• Manufacturer: Schloemann (Beche) DGH 40

Size: 40,000 kgs | Stroke: 1,250 mm | Ram l-r: 3,200 mm | Ram f-b: 3,000 mm | Bpm: 80 | Anvil l-r: 3,000 mm | Anvil f-b: 4,800 mm | Between the guides: 1,200 mm | Total hammer weight: 235,000 kgs | Floor space l...

9" National High-Duty Heavy Upset Forging Machine (Upsetter) - has never been cracked, Re:24440

• used

• Manufacturer: National

Location: Our Cleveland, Ohio Rebuild Facility - in storage and available for inspection. Very good working condition

1,250 kg Lasco model KH-125 Forging

• used

• Manufacturer: Lasco

Additional Info: Weight of falling ram: 1250kg Way between the slides: 500mm Motor power: 22kW Weight of anvil: 19 tons Total weight: 31.5 tons Height above floor: 5000mm Total Height: 5700mm

8,000 lb Erie Drop Forging Hammer, Re:25971

• used

• Manufacturer: Erie Press Systems

Dismantled and moved to storage Very good working condition