Used Machine Tools in Gunma, Japan

1983 Amada RG-100L
- Manufacturer: Amada
- Model: RG-100L
100t Stroke length 100 Table length 4000 Gap depth 500 Open height 370 Auto back gauge Machine weight 7.5t
Tatebayashi, Japan
1991 Takizawa TAL-460
- Manufacturer: país de fabricación
9-inch 3-jaw chuck (Kitagawa/JN09T) Spindle through hole diameter 52 Spindle speed 25-1500 rpm Center distance 800 Bed swing 460 Cross feed swing 250 *This is a machine used at school. If there is a discrepancy b...
Tatebayashi, Japan
1993 Komatsu PHS25×125
- Manufacturer: Komatsu
- Model: PHS25
25t, Table Length 1250, Stroke Length 100, Gap Depth 200, Open Height 325 Stroke Length 100, Manual Back Gauge, Light Stabilizer *This machine was used at a school. If there are any discrepancies between the desc...
Tatebayashi, Japan
1999 Orii LCC03KLMBP-TTS
- Manufacturer: Orii
Plate width 50-300 Plate thickness 0.3-3.2 Maximum line speed 12m/min Maximum coil mass 1500kg Machine weight 1.0t *Feed from right to left If there is a discrepancy between the contents and the actual product, t...
Tatebayashi, Japan
2006 HOWA OHKUMA 2SP-V60
- Manufacturer: Okuma
- Model: V60
FANUC0-TT 24-inch 3-jaw chuck on both sides 12-sided turret on both sides Maximum machining diameter 610 Maximum machining length 660 Stroke: X370 Z660 Rotation speed 20-2000 rpm Left and right output chip convey...
Tatebayashi, Japan
1992 Fuji Kiko SMP-30
- Manufacturer: Fuji
In case of any discrepancy between the contents and the actual product, the actual product will be given priority.
Tatebayashi, Japan
2002 Kitai Sangyo HI-PRO5A
- Manufacturer: Kitai Industry
Max. cutting diameter φ50, Number of teeth 6-100 If there is any discrepancy between the contents and the actual product, the actual product will be given priority.
Tatebayashi, Japan
1997 Kitai Sangyo 8-FN
- Manufacturer: Kitai Industry
Cutting module 0.2-2.0 Cutting diameter 3-160 If there is any discrepancy between the contents and the actual product, the actual product will take priority.
Tatebayashi, Japan
Hamai Sangyo 40
- Manufacturer: Hamai
- Model: 40
Cutting gear: Spur gear Max. cutting diameter 30 Max. cutting length 30 Max. installation length 50 Max. cutting Module 1.0m Number of cutting teeth 6-260(390)z If there is any discrepancy between the contents an...
Tatebayashi, Japan
2001 Tiger Giken VPD208M
- Manufacturer: Giken
2t Stroke 800 If there is any discrepancy between the contents and the actual product, the actual product will take precedence.
Tatebayashi, Japan
1992 LUXO SE-400(L-400)
- Manufacturer: Laxou
Three-phase 200 V, table dimensions 600 x 600 mm, with feeder If there is any discrepancy between the contents and the actual product, the actual product will take precedence.
$2,895 USD
Tatebayashi, Japan
1990 COLCHESTER TRIUMP2500
- Manufacturer: Colchester
9-inch 3-jaw scroll chuck (Kitagawa/JN09T) with 2-axis digital scale If there is any discrepancy between the contents and the actual product, the actual product will take priority.
Tatebayashi, Japan
1986 NCC NCC-300
- Manufacturer: NCC
Three-phase 200 V 50/60 Hz Table dimensions 500 x 500 mm, weight 250 kg Photographs are of an uncleaned condition. If there is any discrepancy between the contents and the actual product, the actual product will ...
$1,287 USD
Tatebayashi, Japan
1986 NCC NCC-400
- Manufacturer: NCC
3-phase 200V 50/60Hz Table size 550 x 700mm Weight 630kg If there is any discrepancy between the contents and the actual product, the actual product will take priority.
$2,252 USD
Tatebayashi, Japan
1983 ncc ncc-500
- Manufacturer: NCC
In case of any discrepancy between the content and the actual product, the actual product will take precedence.
Tatebayashi, Japan