Used Machine Tools in Saxony, Germany

DECKEL clamping drive

• Manufacturer: Deckel / Maho

Clamping drive, manual with fine adjustment DECKEL spare part for milling machine DECKEL KF12 ! used, tested !

DECKEL trapezoidal threaded spindle

• Manufacturer: Deckel / Maho

Trapezoidal threaded spindle COVER Thread: Ø 24 mm spare part for milling machine DECKEL KF12 ! used, tested !

ROCKWELL compressed air drill

• Manufacturer: Rockwell

Pneumatic drill, pneumatic drilling machine, pneumatic tool ROCKWELL INTERNATIONAL MODEL 21L8020 POWER TOOL DIVISION internal tool lubricator used, tested !

RSF-ELEKTRONIK length measuring system

Length measuring system RSF-ELEKTRONIK MSA6706 83577408 approx. 0.6 m connection cable Spare part e.g. for machining center MAZAK AJV25/405 ! used, tested !

HEIDENHAIN length measuring system

Length measuring system HEIDENHAIN LS486C ID 329 991-22 approx. 1,5 m connection cable Spare part e.g. for machining center HECKERT CWK400 D ! used, tested !

PAULSTRA all-metal damper

• Manufacturer: PAULSTRA

All-metal damper, machine foot set, leveling foot set, vibration isolator PAULSTRA V1H752-11 Material (all-metal damping pad) CrNi steel wire All-metal damper set consists of 4 feet ! used, tested !

PAGUS drive unit

• Manufacturer: Pagus

Drive unit ( without motor ) for tool chucks PAGUS Ø 80 mm Flange diameter: Ø 104 / 80 mm, depth: 12 mm 4x threaded hole: M6 x 1.0, depth: 10 mm 4x threaded hole: M5 x 0.8, depth: 10 mm Drive unit with pneumatic ...

HELLER chip conveyor

• Manufacturer: Heller

Chip conveyor HELLER type BEA 05 Drive motor: 0,3 kW 9.0 rpm 220 / 380 V 3AC, 50 Hz Coolant pump1: Q: 250 l/min, H: 13 m 1.7 kW 2850 rpm 230 / 400 V 3AC 50 Hz Coolant pump2: Q: 100 l/min, H: 2 m 0.24 kW 2750 rpm ...

PROGRESS Magnetic disk

Magnetic plate, magnetic chuck, magnetic table, electric PROGRESS ELECTROMAGNET ELSTERWERDA FE200/600 TGL 10272 0.11 kW 110 V DC 0.5 A IP65 approx. 1.5 m connection cable with plug used, tested !

WMW side clamps

• Manufacturer: WMW

Side tensioner, tensioner WMW 110 x 50 mm Jaw can be used on both sides ! 4x slotted hole: Ø 21 x 60 mm, height: 46 mm threaded spindle with 2x hexagon head, width across flats: 17 mm used, tested !

WMW clamping prism

• Manufacturer: WMW

Clamping prism, clamping prism, prism, 4 pieces WMW Other quantities on request ! used, tested !

Angled table 1800 x 1500 mm

Angle table, clamping angle used, tested ! Clamping: 1,800 x 1,500 mm | Dimensions: 1500 x 950 x 1800 mm

WMW clamping angle

• Manufacturer: WMW

Clamping angle WMW Tensioning hole: Ø 60 mm, depth: 25 mm ( continuous ) used, tested !

PAGUS tilting table

• Manufacturer: Pagus

Tilting table, clamping table, sine table PAGUS 250 x 180 mm approx. 75° tiltable Groove in base plate: groove width: 14 mm, groove depth: 4 mm used, tested !

PROGRESS Magnetic disk

Magnetic plate, magnetic chuck, magnetic table, electric PROGRESS ELECTROMAGNET ELSTERWERDA FE200/600 0.11 kW 220 V DC 0.5 A IP65 used, tested !