Used Machine Tools in Texas, USA

2010 Watson 3260 CM

• Manufacturer: Watson

Beefy, torque monster of a rig! - Rig is dependable and in every day operations - Swing motors mounting plate recently replaced by Watson - Final drive recently repaired by Watson - Transmission gone through ...

12" Railhead Reamer (DEMO), REBUILT Large Railhead Pilot Bit

Any Reasonable Offers Considered Read More Request a Quote Get Financing Value Your Trade Schedule a Visit View Attachments

2014 Watson 2500 CM

• Manufacturer: Watson

Low hours! Price just reduced! - 60-ft max drill depth - 6-in and 4-in Kellies - Only 1,402 hours - John Deere engine - Located in Dallas, TX

2007 Spiradrill LHD-50

• Manufacturer: Spiradrill
• Model: LHD-50

- Under 3,700 hours - Ready for work Hours/mileage: 3,654 as of 12/23 | General condition: Good

2023 IMT A250

• Manufacturer: IMT
• Model: A250

Like new, IMT A250 ready for work. The machine was designed for very arduous applications as, thanks to its high torque and high-performing winch, it is capable of reaching great depths, also with great diameters...

SEOAM 40” 3-JAW HYDRAULIC CHUCK

• Manufacturer: SEOAM

SEOAM 40” 3-JAW HYDRAULIC CHUCK Spindle nose: Flat back | Jaw stroke: 30 mm, | Plunger stroke: 57 mm | Maximum gripping diameter: 1000 mm | Minimum gripping diameter: 330 mm | Maximum input force: 161 KN, (16450 ...

SCHUNK ROTA-S PLUS MANUAL 3-JAW CHUCK

• Manufacturer: Schunk

SCHUNK ROTA-S PLUS MANUAL 3-JAW CHUCK (Quick change jaw system)

Autoblok 3 Jaw Hydraulic Chuck

• Manufacturer: Autoblok

Model 315 GHN Chuck O.D. 12" Chuck I.D. 3.75" Chuck Mount A-11 (7.75" back taper bore) Master Jaws Fine Serrations

KITAGAWA UPR450U EXTENDED STROKE AIR CHUCK

• Manufacturer: Kitagawa

Clamping stroke per jaw 0.55”, 14mm This chuck was on short term loan until a special-order chuck arrived. KITAGAWA UPR450U EXTENDED STROKE AIR CHUCK

ROHM STANDARD STROKE AIR CHUCK

• Manufacturer: Röhm

We reassembled the chuck with NEW O-rings and any other parts required and checked the chuck under pressure in the open and closed position overnight to make sure it was holding air.

SMW BB400-140SS

• Manufacturer: SMW

Air Distributor Ring A11 Adapter plate O.d.: 16” | I.d: 5.5” | Max rpm: 1600 | Jaw stroke: .27” | Weight: 340lbs

Haas DM-2 Machining Center

• Manufacturer: Haas
• Model: DM-2

Good condition Haas DM-2 Machining Centers available between 1989 and 1996 years. Located in USA and other countries. Click request price for more information.