Used Machine Tools in Texas, USA

Trusted Seller
25380 Gallon SS Tank
SS TANK SS Vert Storage Tank, approx 12' dia x 30'H with 20"dia side CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. Shipping dates a...
Houston, TX
Trusted Seller
27800 Gallon SS Tank
- Manufacturer: Taylor
TAYLOR Taylor SS Horizontal Storage Tank, s/n 2066, 27,800 gal., 13'6" dia x 26' on straight side, 20psig @ 220 deg F (caffine recovery tank) CONDITIONS: All quotations are for immediate acceptance. They are subj...
Houston, TX
Trusted Seller
1600 Gallon SS Tank
- Manufacturer: Crepaco
CREPACO Crepaco SS Mix Tank, approx 1600 gal, insulated, dome top.dish bottom, 90"dia x 128"H, 20"dia MH, with Chemineer model 3HHTD-5, 5hp/1200rpm top mounted 4 blades axial flow agitator, on stainless legs supp...
Houston, TX
Trusted Seller
1600 Gallon SS Tank
- Manufacturer: Crepaco
CREPACO Crepaco SS Mix Tank, approx 1600 gal, insulated, 90"dia x 128"H, 20"dia MH, dome top, dish bottom, with Chemineer model 3HHTD-5, 5hp/1200rpm top mounted dual 4 blades axial flow agitator, on stainless leg...
Houston, TX
SEOAM 40” 3-JAW HYDRAULIC CHUCK
- Manufacturer: SEOAM
SEOAM 40” 3-JAW HYDRAULIC CHUCK Spindle nose: Flat back | Jaw stroke: 30 mm, | Plunger stroke: 57 mm | Maximum gripping diameter: 1000 mm | Minimum gripping diameter: 330 mm | Maximum input force: 161 KN, (16450 ...
$18,000 USD
Houston, TX
SCHUNK ROTA-S PLUS MANUAL 3-JAW CHUCK
- Manufacturer: Schunk
SCHUNK ROTA-S PLUS MANUAL 3-JAW CHUCK (Quick change jaw system)
$11,500 USD
Houston, TX
Autoblok 3 Jaw Hydraulic Chuck
- Manufacturer: Autoblok
Model 315 GHN Chuck O.D. 12" Chuck I.D. 3.75" Chuck Mount A-11 (7.75" back taper bore) Master Jaws Fine Serrations
$2,250 USD
Houston, TX
Trusted Seller
ROCKFORD 24
- Manufacturer: Rockford
- Model: 24
Navasota, TX
Trusted Seller
1958 CINCINNATI TOOL MASTER
- Manufacturer: Cincinnati
10" X 42" Used Cincinnati Knee Type Milling Machine Machine Has Been Cleaned & Painted Table Size 10" X 42" Spindle Diameter 4" Spindle Taper #40 Standard Spindle Speeds Variable 85 To 3,800 Rpm's Spindle Feeds...
Navasota, TX
Trusted Seller
1959 CINCINNATI TOOL MASTER
- Manufacturer: Cincinnati
10" X 49" Used Cincinnati Knee Type Milling Machine Table Size 10" X 49" Spindle Taper Vertical 40 Taper Spindle Speeds Variable 75 To 1,130 Rpm's Spindle Quill Travel None Spindle Diameter 4" Spindle Tilt +/- 4...
Navasota, TX
Auction
TONG VISE, PETOL MDL. TV116, size 116, 4" - 14"
- Manufacturer: Petol
TONG VISE, PETOL MDL. TV116, size 116, 4" - 14"
Houston, TX
Visit Auction Website
Auction
TONG VISE, PETOL MDL. TV116, size 116, 4" - 14"
- Manufacturer: Petol
TONG VISE, PETOL MDL. TV116, size 116, 4" - 14"
Houston, TX
Visit Auction Website
2001 Rodrill 635T
- Manufacturer: Rodrill
Rare Rodrill manufactured track rig currently available This rig was designed and manufactured by Rodrill in San Antonio, TX. The design is very similar to a mix between a Texoma 700 and an H&T 635. It utilizes a...
$85,000 USD
Aurora, TX
KITAGAWA UPR450U EXTENDED STROKE AIR CHUCK
- Manufacturer: Kitagawa
Clamping stroke per jaw 0.55”, 14mm This chuck was on short term loan until a special-order chuck arrived. KITAGAWA UPR450U EXTENDED STROKE AIR CHUCK
Houston, TX
Auction
CHAIN WRENCH, GEAR WRENCH, MDL. J778 / MJ156, size 15 1/2S
CHAIN WRENCH, GEAR WRENCH, MDL. J778 / MJ156, size 15 1/2S
Houston, TX
Visit Auction Website
Haas VF-6/40 Machining Center
- Manufacturer: Haas
- Model: VF-6/40
Good condition Haas VF-6/40 Machining Centers available between 1998 and 2010 years. Located in USA and other countries. Click request price for more information.
USA