Used Materials Testing in Taiwan

Manual Rockwell Hardness Tester Confirm to GB/T230.2, JJS Z2245, EN-ISO6508, ASTME-18 Standard

Applications: Hard alloy / Surface hardened steel / Copper alloy / Carburized steel / Hard cast steel / Malleable casting / Annealed steel / Hardened steel /Aluminum alloy / Soft steel / Bearing steel Features: ●...

QC-622H Surface Hardness Abrasion Tester

Surface Hardness Abrasion Tester is for measuring surface treatment such as painting, plating, coating, dyeing and finishing the design of the machine. It can use cotton, sand paper, steel wool and eraser to test...

Hardness Specimen Cutting Device

• Manufacturer: cometech testing machines

QC-603I is suitable for hardness flat shape of polymer material, as a fixed sample or specimen trimming purposes. It needs to base on forming of appearance to make mold and take slightly larger than finished prod...

Adhesion/Release Tester Confirm to FINAT 4 Standard

• Manufacturer: cometech testing machines

QC-527 test range can do low and high speed peel test and also for 90 ° 、180° multi-angle peel test. Low speed peeling force generally uses 300mm/min to proceed with test, testlow-stick adhesive label tear force....

QC-113A Pneumatic Type Drop Tester Confirm to ASTM 5276 / GB/T 4857.5 / CNS 2999 / ISTA 1A / ISTA 2A Standard

• Manufacturer: cometech testing machines

Suitable for testing the impact resistance of packaging and electronic products during transportation. It features a single-wing structure, occupies a small space, and is typically used to simulate product impact...

Spray Tester Confirm to JIS- L1092 , BS EN 24920 , AATCC-22 , ISO 4920, ASTM D1913-2000, ASTM D583-54 Standard

• Manufacturer: cometech testing machines

QC-305 may test water-proof or non-water-proof textile surface water resistance. Clamping textile with 45 degree angle on grip, hold open around 150mm diameter plane, putting sprayer above sample center 150mm, sp...

Electronic Drop Dart Impact Tester Confirm to ASTM D1709 GB-9639 Standard

• Manufacturer: cometech testing machines

This tester is according to test standard of method A and method B. The test plastic film is clipped on dia. 127mm of round clamp by very quick pneumatic way. The impact head method A is dia. 38.1mm and method B ...

Portable Hydrostatic Head Tester

• Manufacturer: cometech testing machines

QC-317M(N) Portable design and without electricity that can proceed with test. No time and space limitations, mainly used on the spot measurement, inspect textile water-resistance ability. The test method is divi...

Vicat Heat Deflection Tester Confirm to ASTM D648 ISO 75-1 Standard

• Manufacturer: cometech testing machines

The specimen is given a fixed 10N force (or 50N) at the center with a standard Ø1 mm pin, and the temperature should increase by 50 (or 120) degrees Celsius per hour. When the penetration depth of specimen reache...

Tape Holding Power Tester (Normal Type) 10 sets Confirm to GB/T 4851, ASTM D3654, PSTC 7 Standard

• Manufacturer: cometech testing machines

QC-801(A)(B)(C) Specimen stick test area can use 1/2”x1”or 1”x1”, unified to use 0.45 pound of load scrunch through specimen, hanging counterweight in the lower end of specimen. Timer automatically stops counting...

Manual Molding Machine

• Manufacturer: cometech testing machines

QC-601B has parallel pressure plates and according to area of the material and force demand to choose machine type. Commonly used in powder compact, parts assembly, lamination work. Put the ingredients in the mid...

DIN Abrasion Tester Confirm to DIN53516 ISO-4649 GB/T 9867 SATRA TM174 Standard

QC-618A is suitable for elastic material, rubber, tires, conveyor belts, transmission belts, shoe soles and software synthetic leather. The specimen of wear area is dia. 16mm which provide the required load and t...

QC-621HSurface Hardness Abrasion Tester

QC-621H of main purpose is for measure surface treatment such as painting, plating, coating, dyeing and finishing the design of the machine. It can use cotton, sand paper, steel wool and eraser to test specimen o...

Circular Sample Cutter Confirm to ISO3801, ASTM D3776, GB/T4669, BS2471 Standard

• Manufacturer: cometech testing machines

QC-PS can cut specimens of area 100cm², weighing specimen unit weight, the balance of the required minimum reading value should reach 0.01 g. The cutter can cut specimens that thickness are 5 mm. Cutting material...

Manual Roller , Motor Roller Confirm to JIS-C2107, Z0237, PSTC 7 Standard

• Manufacturer: cometech testing machines

QC-803A QC-803A is controlled by hand, hold roller and slightly go up, let fixed base leave the axle center, this moment the roller equals to standard weight, with 300mm/min speed back and forth roll through spec...