Used Materials Testing in Taiwan

Surftest SJ-410 Series 178-Portable Surface

SPC output cable: 1m 936937 / 2m 965014inch/mm switch

Desktop Metallographic Cutting Machine

• Manufacturer: Taiwan Nakazawa

Used for precision cutting and sampling of small products, vertical feed type, which can cope with the sampling of a large number of products. The side provides an openable door to cut long samples. The fixed T-s...

Hydraulic Brinell Hardness Tester

(NBH-3) Technical specifications Standard accessories (FB-1) Technical specifications Standard accessories Brinell hardness standard block requires additional pre-order

Force Gauge

• Manufacturer: cometech testing machines

QC-PP Mechanical Push-Pull Tester or QC-PPI Electronicis a small size, easy-operating, high resolution and portable equipment. HF Serial of digital push-pull test can do simple loading test on various test. Our d...

Manual Twist Counter for Steel Wire

• Manufacturer: cometech testing machines

QC-310A main function is to test steel wire twist, applied in general twisted wire or hard wire twisted test, with obverse and inverse S and Z twisted direction Industry: Metal (Steel wire)

Optical Film Abrasion Tester

WD-M013 is mainly use in light load friction test. Specimen placed on a movable platform, abrasion head is designed to be able to zero setting of original load and test load can be set to 50-2000g. Light friction...

Solar Panel Abrasion Tester Confirm to EN 1096-2 Standard

GI-M043 is designed for the requirements of solar panel surface abrasion test, use wool felt to do abrasion test, during testing process that each wool felt abrasion stroke needs to self-rotation 20 degrees, set ...

QT-010 Manual Torque Tester

• Manufacturer: cometech testing machines

Model QT-010 is used for testing the Torsion of cap product. It can test the both direction of clockwise and counter-clockwise torsion. The clamping way is using adjustable fixture and quick drilling screw. It ca...

Screw Penetrator

• Manufacturer: cometech testing machines

YY-S20 is designed to test self-tapping screws or drilling screws penetration ability, clamping iron plate on lower fixture, set rotating speed and load, put screws and then start machine. Screw rotates to penetr...

Programmable Torque Tester

• Manufacturer: cometech testing machines

This model is equipped with servo motor. The sample is rotated automatically for clockwise / counter-clockwise torque analysis. The software is included in standard to help analysis Max. Static Torsion, Dynamic T...

SM Series Thickness Gauge

• Manufacturer: cometech testing machines

This product is small, lightweight and easy to carry, with big dial design, easy to get measurement data. Various specifications are available and prices are economy, it is the most people thickness gauge selecti...

MIT Folding Endurance Tester Confirm to TAPPI T423PM 、 ASTM D2176 、 JIS P8115 、 GB/T 2679.5 、 ISO 5626 Standard

• Manufacturer: Cometech Testing Machines

MIT Folding Endurance Tester is for testing the material's folding endurance strength, the machine can test the available bending times when the material bear the tension and bending angle (from +135 degree to -1...

Stand Holder Confirm to ASTM D2240 ISO 868 DIN 53505 JIS K7215-1992 JIS S6050 Standard

Hardness tester is suitable for soft material such as nonmetal. Applying the specified force on the standard material plate, and the hardness of the material can be obtained by reading the values on the pointer. ...

Drop Weight Impact Tester Confirm to BS EN 1621-1-2012、 BS EN 1621-2-2014 Standard

• Manufacturer: cometech testing machines

This tester is applied on buffer material test with a standard weight of 5kg hammer, drop height is usually 100cm, can produce about 50 joules to hit against test pieces vertically. This tester can read remaining...

Long Extensometer

• Manufacturer: cometech testing machines

Long extensometer is suitable for higher than 20% of elongation of rubber, plastic, PE, fabric, webbing of material which are high elongation measurement accessories. The specimen usually made dumbbell-shape. The...