Used forging

10,000 lb Chambersburg model "L" Closed

• Manufacturer: Chambersburg CECO "L" Power Drop

Additional info: Minimum die bearing area: 800 Sq inches Minimum die striking area: 188 Sq inches Note: Minimum striking areas must be distributed evenly front-to-back and side-to-side. Data is predicated on usin...

1986 25 ton Pahnke FM 25/64 Rail Bound, Max tongs

• Manufacturer: Pahnke

Lift tons: 25 tonnes | Max rds: 1,473 mm | Min rds: 609 mm | S-shift: 250 mm | Vertical stroke of tongs parallel to floor: 800 mm | Rail centers: 3,750 mm | Max turning circle of fully opened tongs: 2,058 mm | L...

50kj Beche KGH 5.0B Short Stroke Hydraulic Die Forger

• Manufacturer: Beche

Additional info: The line consists of: - 50KJ Beche hammer - 150 t trimming press - Induction heater Max blows with nominal blow effect - 99 bpm Useful blows with nominal blow effect - 45 bpm Slide stroke - min 5...

2020 CARER R45H2 AGV SPED 9,920 lbs capacity Remote controlled

• Manufacturer: Carer

Lift tons: 4.1 tonnes

1989 Demag HSP 630/1600 63 tonne Carrying

• Manufacturer: Demag

Very good working condition Available for immediate inspection and delivery Still installed and under power for inspection

1976 1 tonne Dango & Dienenthal model AMP 1000

• Manufacturer: Dango & Dienenthal AMP 1000

Lift tons: 1 tonnes | Max rds: 400 mm | Min rds: 100 mm | Model number: AMP 1000

26,400 lb (12 tonne) Lasco KGK 1600 Electro-

• Manufacturer: Lasco

Additional info and upgrades as follows: A new Anvil was installed in 2006 New Side Columns installed in 2013 were made of weldable alloy according to ISO TR 10809-2 standards Hammer total height is 10,600mm Die ...

2,900 kg Lasco model KH 315

• Manufacturer: Lasco

Size: 2,900 kgs | Stroke: 1,100 mm | Ram l-r: 700 mm | Ram f-b: 700 mm | Anvil l-r: 700 mm | Anvil f-b: 700 mm

500kW Interpower 2-1/4" to 6" Induction Billet Heater,

Description: 500kW Interpower 2-1/4" to 6" Induction Billet Heater

1,000 ton OWZ 16" Bar diameter

Additional info: Model - HRW-1000 Working Range: Rounds: Ø 100 – 400 mm Squares: 400 x 400 mm Straightness of the bar Ø 320: 10 – 45 mm Ø 210: 10 – 25 mm Ø 130: 15 – 40 mm Ø 90: 25 – 40 mm Weight of the bar -...

100 ton Clearing HG-100-25 C-Frame

Very good working condition Available for immediate inspection and delivery Still installed and under power for inspection

Asahi Okuma AT-635 2D/2B Cold Header

• Manufacturer: Okuma

SPECIFICATIONS: FEATURES: * BUSHING CUT-OFF * OSG MONITOR * TIMED POSITIVE KNOCKOUT IN 1ST AND 2ND * WIRE STRAIGHTENER * SOUND ENCLOSURE * TONS of TOOLING!!

Nakashimada PF-860 2D/3B Cold Header 5/16″

• Manufacturer: Nakashimada

8mm NAKASHIMADA PF-860 2-DIE/3-BLOW COLD HEADER WITH FINGERLESS TRANSFER SPECIFICATIONS: MAX. 1 ST MAX. 2 ND MAX. PRODUCTION RATE: 50 – 120 PPM FEATURES: POSITIVE KNOCKOUT IN 2 ND & 3 RD PUNCH DIE RELIEVING KNOCK...

1999 Viking Champion 304A

• Manufacturer: Viking

Electrical Redone in 2012 | 4 Stringer | Right - Right

Taylor Winfield Rocker Arm NB-24-50

• Manufacturer: Taylor Winfield

Transformer: 75 KVA | Voltage: 440/460/480 Volts, Single Phase | Throat depth: 42" in | Secondary volts: 5.1 - 8.4 | Secondary amps: 21500 | Air type: Standard Dual Acting | Cylinder diameter: 5 in | Holder diam...