Used forging

Taylor Winfield Rocker Arm NB-24-50

• Manufacturer: Taylor Winfield

Transformer: 75 KVA | Voltage: 440/460/480 Volts, Single Phase | Throat depth: 42" in | Secondary volts: 5.1 - 8.4 | Secondary amps: 21500 | Air type: Standard Dual Acting | Cylinder diameter: 5 in | Holder diam...

1980 440 ton 3-1/2" dia Peddinghaus Caddy 80 Bar

• Manufacturer: Peddinghaus

Additional info: Cutoff capacities at material tensile strengths: Rounds: psi 65,000 - 3.500" psi 92,000 - 3.156" psi 121,000 - 2.750" Squares: psi 65,000 - 3.937" psi 92,000 - 3.562" Flats: psi 65,000 - 7" x 1.3...

1980 1,200 ton National model 6-4 Heavy

• Manufacturer: National

Complete with: Spare parts as follows : (1) Main Electric Motor (2) Adjusting Wedges (1) Upper transfer finger assembly (1) Lower transfer finger assembly (1) Die Block clamping piston This National 6-4 was used ...

3,500mm Asian Built Radial Axial Ring Rolling Mill Re:24925

• Manufacturer: Asian Built

Dia: 3,500 mm | Height: 800 mm | Builder: Asian Built | Radial: 280 tonnes | Axial: 180 tonnes | Min dia: 650 mm | Number of main roll motors, current type & power of each: One DC @ 500kW | Number of axial roll ...

2,800mm Banning RWW H120/V100 CNC

• Manufacturer: Banning

Max Ring diameter - 2,800mm (110") Max Ring height - 500mm (19.7") Radial tonnage - 120 tons Axial tonnage - 100 tons Max Ring Blank weight is 2,000 kg Radial (King) Roll drive power - 315 kW (422 hp) Axial (Edgi...

6000mm dia Kaltek Ring Rolling Mill, 80~1100 Ring Height

Additional info: Replacement of PLC Control system, PLC Main panel & Operator's panel to brand new Siemens S7-400 Upgrade of Hydraulic system Replacement of packing and seals Replacement of bearings Current Volta...

1970 1,200 ton Hatebur AMP-70 4-Die, max bar dia

Still installed and under power for inspection Very Good working condition Available for immediate inspection and delivery

1970 250 ton Hatebur AMP-30 3-Die, 120ppm,

Dia: 40 mm | Tons: 250 tonnes | Builder: Hatebur | Part dia: 64 mm | Max cutoff length: 72 mm | Max die ejector: 70 mm | Min cutoff length: 19 mm | Max outer dia for combination parts: 55 mm | Max width across t...

1995 740 ton AMD model 740-2630 Bar & Billet Shear,

• Manufacturer: AMD

Bar dia: 156 mm | Max sqr: 137 mm | Model #: 740-2630 | Force: 671.3 tonnes | Ram stroke: 457 mm | Net weight: 16,783 kgs

300mm dia x 100mm height Mitsubishi

• Manufacturer: Mitsubishi

Additional info: Ring blank dia range: 52mm to 70mm Ring blank height: 110mm Main roll power: 37 kW Electrics: 220V/3/60 Edge roll O.D.: 29.5mm ~ 185mm Edge roll power: 37 kW Edge roll taper angle: 40º Medium rol...

2200mm dia x 450mm height Wagner RAW

• Manufacturer: Wagner

Additional info: Radial Drive motor: 300hp Axial Drive motor: 200 hp

3,500mm Ø x 1,200mm H Seonam

Additional info: Min. inside diameter(Mandrel dia.:300mm): 320mm Ring weight: Max. 12,500kgs (27,500 lbs) (Main roll) Diameter: 1300mm Height: 1400mm Rolling speed: Max. 1.5m/sec (Mandrel) Diameter: 300mm Horizon...

45mm diameter Smeral UL 45A Cylindrical type

• Manufacturer: Šmeral Brno
• Model: UL 45

Moved to storage Immediately available Exceptional Condition

1970 1200 ton Hatebur model AMP 70 Hi-Speed

Available for immediate inspection and delivery Dia: 60 mm | Tons: 1,200 tonnes | Builder: Hatebur | Part dia: 125 mm | Max cutoff length: 140 mm | Max die ejector: 130 mm | Part wt: 6 kgs | Min cutoff length: 45...

2006 80mm dia Jaewoo JCP-450

• Manufacturer: Jaewoo

Additional info: Minimum cutting diameter: 28mm Max cutting length: 450mm Minimum cutting length: 50mm Feeding motor power: 2.2 kW Very good working condition Available for immediate inspection and delivery Still...