Building Filters
SIMCO 2400 DRILL RIG #7055T
- Manufacturer: Simco
Freshly rebuilt 4-cylinder Wisconsin gas deck engine (rebuilt with approx 4 hours), 15’ mast, winch line, cathead, 1 speed drill head, new hydraulic pump, mounted on IC35 rubber tracked carrier with 3-cylinder De...
HUGHES WILLIAMS LLDH MODEL 1000-DOH DRILL RIG #2940Tb
- Manufacturer: Hughes
Manufactured 1974, Fully refurbished, 80’ depth, 5” inner kelly, 7” outer kelly, John Deere 6068 6 cyl engine, 30 ton Pullmaster main winch, 12,000# service winch, air clutches, Joy sticks for travel and turn, mo...
- Trusted Seller
2015 ATLAS COPCO SMARTROC T45
- Manufacturer: Atlas-Copco
- Model: SMARTROC T45
- Horsepower: 225 hp
4.5 – 5.5 Inch Class CAT C9.3 TIER 4 Engine COP 2560 Drifter Like new, only 500 Hours CAT C9.3 TIER 4 Engine – 325 HP @ 2000 RPM Compressor – Atlas FAD @ 175psi, 473cfm Hydraulic Drifter – COP 2560 – 33.5 HP impa...
Louisville, KY - Trusted Seller
GILL BEETLE
DTH Class Drills Holes 4 to 24 in Diameter Able to Drill Holes Vertically, Horizontally, and Every Angle in Between Has a Hydraulic table for up to 9 opening IR-360 DTH Hammer w/ Bits 8.5 and 7.5 IR-350 DTH Hamme...
- Trusted Seller
2020 Sandvik DP1500I
- Manufacturer: Sandvik
- Model: DP1500
- Operating weight: 23,000 kg
2,295 total hours & 1,015 percussion hours Cat C13 Tier 4 Diesel Engine Drifter / Rock Drill is a RD1635CF Excellent condition
Louisville, KY - Trusted Seller
2008 ATLAS COPCO ECM720
- Manufacturer: Atlas-Copco
- Model: ECM 720
- Horsepower: 385 hp
- Drilling depth: 29.5 m
4.5 – 5.5 Inch Class Montabert HC200A Drifter Cat C11 Engine Set up for 60mm drill steel Only 3570 Total Hours
Louisville, KY - Trusted Seller
2008 INGERSOLL-RAND ECM720
- Manufacturer: Ingersoll Rand
- Model: ECM-720
- Horsepower: 385 hp
- Drilling depth: 30 m
4.5 – 5.5 Inch Class Montabert HC200A Drifter Cat C11 Engine Set up for 60mm drill steel Only 3570 Total Hours
Louisville, KY BUCYRUS ERIE 22W CABLE TOOL DRILL RIG #5504T
- Manufacturer: Bucyrus-Erie
- Model: 22W
- Mast Height: 12.19 m
3 line machine, approx 600’ of cable on it, Ford 6 cyl gas deck engine, mounted on 1979 International tandem axle truck with 345 gas engine, 3 strings of tools (drilling string, clean out string and 4” clean out ...
- Trusted Seller
2013 MONTABERT MICRO CPA360
- Manufacturer: Montabert
Montabert Micro CPA Package Bobcat Mini Excavator E60 w/ 600 Hours HB980 Hydraulic Breaker w/ 120 Hours Doosan P185WJD-T4i Portable Air Compressor w/ 84 Hours Hydraulic Clamp, E60 Micro CPA Drilling Attachment Th...
Louisville, KY - Trusted Seller
1993 INGERSOLL-RAND DML
- Manufacturer: Ingersoll Rand
4.5 – 5.5 Inch Class CAT 3412 Diesel Engine w/ Only 1,500 Hours Since Rebuild Runs 30ft Drill Steel High Pressure Unit w/ On-Board IR HR2 1050 CFM / 350 PSI New Pump Drive and Double Motor Spur Gear Head
Louisville, KY - Trusted Seller
2011 FURUKAWA HCR900ES
- Manufacturer: Furukawa
- Model: HCR900ES
- Horsepower: 225 hp
- Machine weight: 202 kg
2.5 – 3.5 Inch Class HD709 Drifter w/ 1545 Percussion Hours CAT 3126 Diesel engine w/ 3118 Hours Extendable boom Single-Lever Drilling Controls Design Versatility Allows for Drilling either Horizontally or Vertic...
Louisville, KY - Trusted Seller
2003 DRILTECH D55SP
- Manufacturer: Driltech
DTH Class 3508 Cat Engine Single Pass Unit Currently using a 8” DTH Hammer with a 9” Bit Equipped w/ ( 2 ) 6 ½” x 25 ft. Drill Pipe w/ 8” DTH Hammer Dust Collector Mast 73’ Long, U/C 85% – Excellent condition. Un...
Louisville, KY 
WILSON MOGUL 42 DRILL RIG #2750T
- Manufacturer: Wilson
96’ x 150,000# telescoping derrick, 300,000# hook load capacity. Substructure 10.8’ height (casing pulling), 14’ (drilling/workover), 225,000lb load capacity (workover) or 400,000# (drilling). Cat 3406 diesel eng...
Oceanside, NY- Trusted Seller
2005 ATLAS COPCO ROC D7-LM
- Manufacturer: Atlas-Copco
- Model: ROC D7 LM
- Horsepower: 225 hp
- Drilling depth: 28 m
3.5 – 4.5 Inch Class Long Mast 20′ FT Steel Cat Engine Unit is still in use. 2005 Atlas Copco ROC D7-11 LF These Photos were taken March 29th, 2016 when the unit had 5798 engine hours & 1494 percussion hours. The...
Louisville, KY 
1997 CANTERRA CT-350 MUD ROTARY DRILL RIG #1520Tc
Manufactured 1997, Gardner Denver 5 x 6 mud pump, Rineer sliding top drive (7500 lbs rotary torque), 28,000 lbs pullback, 35000 lb wireline winch, 12000 lb winch, mast has sliding base and wig wag, mounted on 200...
Atlas-Copco DML-LP Drilling Rig
- Manufacturer: Atlas-Copco
- Model: DML-LP
Good condition Atlas-Copco DML-LP Drilling Rigs manufactured in 2004. Located in USA and other countries. Click request price for more information.
USA
